Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your TUTOTAK TB01BG039 Stackable End Tables. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product. This set includes two versatile end tables designed for various uses in your home.
Image: Set of two TUTOTAK TB01BG039 Greige Stackable End Tables.
Safety Information
Please observe the following safety guidelines to prevent injury or damage to the product:
- Always ensure all screws and fasteners are securely tightened during and after assembly to prevent shaking or instability.
- When stacking the tables, ensure they are placed on a stable, level surface to avoid tipping.
- Do not exceed the maximum weight recommendation of 50 pounds per table.
- Keep small parts and assembly tools away from children during assembly.
- Avoid placing hot items directly on the table surface without protective coasters.
Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer service.
Components for One Table (Two sets included)
- Top Shelf (1)
- Bottom Shelf (1)
- Side Panels (2)
- Metal Legs (2)
- Assembly Hardware (Screws, Allen Wrench)
Image: Exploded view of table components.
Assembly Instructions
Assembly typically takes approximately 15 minutes per table. No additional special tools are required beyond what is provided.
- Step 1: Prepare Components
Unpack all parts and lay them out on a clean, soft surface to prevent scratches. Identify the Top Shelf, Bottom Shelf, Side Panels, and Metal Legs. - Step 2: Attach Metal Legs to Bottom Shelf
Align the Metal Legs with the pre-drilled holes on the underside of the Bottom Shelf. Secure them using the provided screws and Allen wrench. Do not fully tighten yet. - Step 3: Attach Side Panels
Connect the Side Panels to the Bottom Shelf and the Metal Legs. Ensure the orientation is correct, with the open storage area facing forward. Secure with screws, leaving them slightly loose. - Step 4: Attach Top Shelf
Place the Top Shelf onto the assembled structure, aligning it with the Side Panels. Secure with screws. - Step 5: Final Tightening
Once all parts are in place, systematically tighten all screws using the Allen wrench until they are firm. Avoid over-tightening. Repeat these steps for the second table.
Image: Dimensions and stacking concept.
Operating Instructions
Your TUTOTAK TB01BG039 tables offer flexible usage options:
- Individual Use: Each table can function independently as a nightstand, side table, or accent table in various rooms such as bedrooms, living rooms, or reception areas.
- Stackable Design: The tables are designed to be stacked, creating a 2-tier storage unit. This maximizes vertical storage space without occupying additional floor area. To stack, simply place one table securely on top of the other. Ensure the bottom table is stable before stacking.
Image: Illustration of individual versus stacked table configurations.
Image: Stacked tables demonstrating additional storage space.
Maintenance
To maintain the appearance and integrity of your tables:
- Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Periodically check and re-tighten all screws to ensure stability.
- Protect the surface from direct sunlight and extreme temperature changes.
Troubleshooting
If you encounter any issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly/unstable | Screws are loose; uneven floor surface. | Tighten all assembly screws. Move the table to a level surface or use furniture pads to stabilize. |
| Parts do not align during assembly | Incorrect orientation of parts; screws too tight. | Review assembly steps and diagrams. Loosen screws slightly to adjust alignment, then re-tighten. |
| Missing hardware/parts | Packaging error. | Contact TUTOTAK customer service for replacement parts. |
Specifications
| Feature | Detail |
|---|---|
| Brand | TUTOTAK |
| Model Name | TB01BG039 |
| Product Dimensions (each) | 11.4"D x 16"W x 17.7"H |
| Maximum Weight Recommendation | 50 Pounds |
| Color | Greige |
| Material Type | Metal (Base), Engineered Wood (Shelves) |
| Item Weight (each) | 10 Pounds |
| Number of Items | 2 (Set of two end tables) |
| Recommended Uses | Bedside Tables, Side Tables, Accent Tables, Coffee Table, Corner Table |
Warranty and Support
Every TUTOTAK end table undergoes rigorous testing to ensure quality. If you have any questions, concerns, or require assistance with your product, please do not hesitate to contact TUTOTAK customer service. Our friendly and professional team is committed to responding to your inquiries within 24 hours.
For support, please refer to the contact information provided with your purchase or visit the official TUTOTAK website.