GoKBNY DR-HAP002
GoKBNY DR-HAP002 Replacement Air Purifier Filter Instruction Manual
Brand: GoKBNY | Model: DR-HAP002
Introduction
This manual provides essential information for the installation, operation, and maintenance of your GoKBNY DR-HAP002 3-in-1 Replacement Air Purifier Filter. These filters are designed for compatibility with Dreo Macro Pro, Macro Pro S DR-HAP002, and Toshiba Purifier CAF-Z40US/CAF-Z45US models, ensuring optimal air quality in your environment.
The 3-in-1 design incorporates a pre-filter, an H13 True HEPA filter, and a high-efficiency activated carbon filter to capture various airborne particles and odors.

Image: Two GoKBNY DR-HAP002 replacement air purifier filters, showcasing their cylindrical design.
Compatibility
The GoKBNY DR-HAP002 replacement filter is specifically designed to be compatible with the following air purifier models:
- Dreo Macro Pro Air Purifier
- Dreo Macro Pro S DR-HAP002 Air Purifier
- Toshiba Purifier CAF-Z40US
- Toshiba Purifier CAF-Z45US

Image: The GoKBNY DR-HAP002 filter shown with compatible Dreo Macro Pro and Toshiba air purifiers, illustrating its perfect fit.
Setup: Filter Installation
Replacing your air purifier filter is a straightforward process. Follow these steps to ensure proper installation:
- Power Off: Ensure your air purifier is turned off and unplugged from the power outlet before beginning.
- Access Filter Compartment: Depending on your air purifier model, locate and open the filter compartment. This is typically at the bottom of the unit.
- Remove Old Filter: Carefully remove the used filter. Dispose of it according to local regulations.
- Unpack New Filter: Remove the new GoKBNY DR-HAP002 filter from its protective plastic packaging.
- Insert New Filter: Place the new filter into the compartment, ensuring it is seated correctly. The filter is designed for easy placement without tools.
- Secure Compartment: Close and secure the filter compartment cover.
- Power On: Plug in and turn on your air purifier. Reset the filter indicator light if your model has one (refer to your air purifier's manual for specific instructions).
Video: Demonstrates the simple process of replacing the DR-HAP002 filter in a compatible air purifier.
Operating Principles: 3-in-1 Filtration System
The GoKBNY DR-HAP002 filter utilizes a comprehensive 3-stage filtration system to purify your air:
- Pre-Filter: The initial layer captures larger particles such as dust, lint, pet dander, and hair, extending the life of the subsequent filters.
- H13 True HEPA Filter: This high-efficiency filter is designed to capture 99.97% of airborne particles as small as 0.3 microns, including pollen, dust mites, mold spores, and pet dander.
- High-Efficiency Activated Carbon Filter: This layer effectively absorbs various household odors, including those from cooking, pets, smoke, and volatile organic compounds (VOCs), leaving your air fresh.

Image: A visual breakdown of the 3-stage filtration system, showing the pre-filter, H13 True HEPA filter, and activated carbon filter layers.

Image: An illustration detailing the types of particles and odors captured by the True HEPA filtration layer.
Video: Explains the 3-stage powerful filtration process and the benefits of the H13 HEPA and activated carbon filters.
Video: Highlights the benefits of Luripid filters in delivering pure air for a comfortable living environment.
Maintenance: Filter Replacement Schedule
For optimal performance and to maintain clean air, it is recommended to replace the GoKBNY DR-HAP002 filter every 4-6 months. The actual lifespan of the filter may vary depending on usage frequency, air quality in your environment, and the presence of pets or smokers.
Regular replacement ensures that the filtration system continues to effectively capture particles and odors, preventing reduced air purifier efficiency and potential re-release of trapped pollutants.
Troubleshooting
If you experience any issues after replacing your filter, consider the following:
- Reduced Airflow: Check if the filter is installed correctly and the compartment cover is fully secured. Ensure no packaging material was left on the filter.
- Persistent Odors: If odors persist shortly after replacement, verify that the activated carbon layer is intact and that the filter is genuinely new and not expired.
- Filter Indicator Light: If the filter replacement indicator light remains on after installing a new filter, consult your air purifier's user manual for instructions on how to reset it.
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | DR-HAP002 |
| Filtration Type | 3-in-1 (Pre-filter, H13 True HEPA, Activated Carbon) |
| Compatible Devices | Dreo Macro Pro, Macro Pro S DR-HAP002, Toshiba CAF-Z40US/CAF-Z45US Air Purifiers |
| Recommended Replacement | Every 4-6 months (depending on usage) |
| Material | Carbon (Activated Carbon Filter component) |
| Item Weight | 2.14 pounds (0.98 Kilograms) |
| Package Dimensions | 12.3 x 8.2 x 7.9 inches |
| Number of Items | 2 (as per product variant) |

Image: Detailed product dimensions of the filter, indicating its size for proper fit.
Warranty and Support
Information regarding specific warranty details or direct customer support contacts for GoKBNY products is not available in the provided product data. Please refer to the packaging or the manufacturer's official website for the most up-to-date warranty and support information.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.