PMS 921160
SOUND REPUBLIK SOFT TOUCH TWS EAR BUDS FLAT WITH LED User Manual
Brand: PMS | Model: 921160
Introduction
Thank you for choosing the SOUND REPUBLIK Soft Touch TWS Ear Buds. This manual provides essential information for the proper use, setup, and maintenance of your new wireless earbuds. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Product Overview
The SOUND REPUBLIK Soft Touch TWS Ear Buds are designed for seamless sound quality and convenience. They feature a soft-touch finish, an LED light function, and come with a portable charging case. The earbuds offer approximately 3-4 hours of play time and have a wireless range of 10 meters.

The product package includes the Soft Touch TWS Ear Buds and their charging case. The charging case is equipped with a 200MAH battery, while each earbud contains a 3.7V 30MA battery. The charging case is designed to switch off automatically after 5 minutes when not in use to conserve power.
Setup
Initial Charging
- Before first use, fully charge the charging case and the earbuds.
- Place the earbuds into the charging case. Ensure they are correctly seated in their respective slots.
- Connect the charging case to a power source using a compatible charging cable (not specified if included, assume standard USB).
- The charging time for the case and earbuds is approximately 1-2 hours. Observe any LED indicators on the case or earbuds, which typically show charging status (e.g., solid light for charging, off or different color for full charge).
Pairing with a Device
- Ensure the earbuds are charged.
- Open the charging case. The earbuds should automatically enter pairing mode (indicated by flashing LED lights on the earbuds).
- On your device (smartphone, tablet, computer), go to the Bluetooth settings.
- Search for new devices. You should see "SOUND REPUBLIK" or a similar name appear in the list of available devices.
- Select the earbud name to connect. Once connected, the LED indicators on the earbuds will typically stop flashing or change to a steady light.
- If pairing fails, place the earbuds back into the case, close the lid, wait a few seconds, then open the lid and try again.
Operating Instructions
Power On/Off
- Power On: The earbuds automatically power on when removed from the charging case.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging.
Touch Controls
The earbuds feature touch controls for various functions. Specific touch gestures may vary, but common functions include:
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud during an incoming call.
- Reject Call: Press and hold on either earbud during an incoming call.
- Activate Voice Assistant: Triple tap on either earbud (e.g., Siri, Google Assistant).
Note: Refer to the specific product packaging or quick start guide for exact touch control mappings if different from the above.
Charging
The earbuds are charged by placing them inside the charging case. The case itself is charged via a USB connection.
- Earbud Charging: Place the earbuds into their respective slots in the charging case. Ensure the charging contacts align. The earbuds will begin charging automatically.
- Case Charging: Connect a compatible USB charging cable to the charging port on the case and to a power source (e.g., USB wall adapter, computer USB port).
- Charging Time: Approximately 1-2 hours for a full charge of both earbuds and the case.
- LED Indicators: The charging case and earbuds may have LED indicators to show charging status (e.g., red for charging, blue/green for fully charged, or flashing patterns).
- Power Saving: The charging case is designed to switch off after 5 minutes when not in use to conserve battery life.
Maintenance
- Cleaning: Use a soft, dry, lint-free cloth to clean the earbuds and charging case. Do not use abrasive cleaners, alcohol, or chemical solvents.
- Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Water Resistance: These earbuds are not specified as water-resistant. Avoid exposure to water, sweat, and high humidity.
- Battery Care: To prolong battery life, avoid fully discharging the batteries frequently. Charge them regularly, even if not used for extended periods.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Earbuds not pairing with device. |
|
| No sound from one or both earbuds. |
|
| Charging case not charging. |
|
| Earbuds not charging in case. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | 921160 |
| Brand | PMS |
| Earbud Battery | 2 x 3.7V 30MA (included) |
| Charging Case Battery | 1 x 200MAH (included) |
| Play Time | 3-4 Hours Approx |
| Charge Time | 1-2 Hours Approx |
| Wireless Range | 10 meters |
| Control Method | Touch |
| Product Dimensions | 3.94 x 3.94 x 3.94 inches |
| Item Weight | 2.2 pounds |
| Barcode (EAN) | 5050565619976 |
Warranty and Support
For warranty information or technical support, please refer to the contact details provided on the product packaging or the official website of PMS. Keep your proof of purchase for any warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.