1. Introduction
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Generic Livarno Home Round Single-Lever Basin Faucet. Please read this manual carefully before installation and use to ensure proper function and safety.
Safety Information
- Suitable for all pressure-resistant hot water systems such as central heating, water heaters, and pressure boilers.
- Warning: Risk of injury in case of overpressure.
- Not suitable for low-pressure devices and small tanks.
- Ensure all connections are secure to prevent leaks.
- Installation should be performed by a qualified professional if you are unsure.
Package Contents
Before beginning installation, verify that all components are present:
- Single-lever mixer faucet
- Flexible connection hoses (approx. 45 cm length)
- Drain with stopper
- Drain fitting
- Shaft fixing (Shaftfix)
- Threaded rod
- Plastic nut
- Gasket
- Plastic washer
- Hexagonal key
- Mounting material and instructions
Figure 1: Included components for the Livarno Home Round Single-Lever Basin Faucet.
2. Setup and Installation
The Livarno Home basin faucet is designed for easy 1-hole installation with quick shaft fixing (Shaftfix). Follow these steps for a secure and leak-free setup.
- Prepare the Basin: Ensure the basin's faucet hole is clean and free of debris.
- Install the Faucet: Insert the faucet into the basin hole. From underneath, secure it using the shaft fixing (Shaftfix), threaded rod, plastic nut, gasket, and plastic washer. Tighten firmly with the hexagonal key provided.
- Connect Water Hoses: Attach the flexible connection hoses to the hot and cold water supply lines. Ensure a tight seal to prevent leaks. The hoses are approximately 45 cm long.
- Install Drain Assembly: Assemble the drain with the stopper and drain fitting according to the separate instructions provided with the drain components. Connect it to the basin's drain opening.
- Test for Leaks: Once all connections are made, slowly turn on the water supply and check for any leaks at all connection points. Tighten any leaking connections as necessary.
Figure 2: The Livarno Home Round Single-Lever Basin Faucet after installation.
3. Operating Instructions
Your Livarno Home faucet features a single-lever design for easy control of water flow and temperature.
- Water Flow Control: Lift the lever upwards to increase water flow. Push it downwards to decrease or shut off the water.
- Temperature Control: Move the lever to the left for hot water and to the right for cold water. Adjust the position between left and right to achieve your desired water temperature.
- Eco Function: The faucet includes an Eco function for economical water consumption. This feature helps reduce water usage without compromising performance.
- Jet Regulator: The integrated jet regulator ensures a soft and pleasant water stream, preventing splashing.
4. Maintenance and Care
Regular cleaning and proper care will ensure the longevity and optimal performance of your faucet.
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the brass finish.
- Aerator Maintenance: Periodically unscrew and clean the aerator (jet regulator) to remove any mineral deposits or debris that may affect water flow.
- Ceramic Discs: The faucet is equipped with low-wear 26 or 35 mm ceramic discs, designed for durability. No special maintenance is required for these discs under normal use.
- Material: The faucet is made of brass, which is durable and compliant with current drinking water regulations.
5. Troubleshooting
If you encounter any issues with your faucet, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water flow | Clogged aerator or mineral buildup. | Unscrew the aerator and clean it. Flush the lines to remove debris. |
| Leaking at connections | Loose connections or damaged gaskets. | Ensure all connection hoses and fittings are tightened securely. Check and replace gaskets if damaged. |
| Water temperature inconsistent | Issues with water supply or mixer cartridge. | Verify hot and cold water supply. If problem persists, consult a qualified plumber. |
| Faucet not suitable for low-pressure system | Incorrect system type. | This faucet is designed for pressure-resistant hot water systems. It is not compatible with low-pressure devices or small tanks. |
If the problem persists after attempting these solutions, please contact a qualified plumber or the product supplier for assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Generic |
| Model Number | 4055334440899 |
| Manufacturer | Conmetall Meister GmbH |
| Material | Brass, Plastic |
| Finish Type | Brass |
| Color | Copper |
| Style | Lever |
| Installation Method | Single-hole |
| Number of Handles | 1 |
| Handle/Lever Material | Brass |
| Connection Hose Length | Approx. 45 cm |
| Dimensions (Round Model) | Approx. 137 x 133 x 52 mm |
| Weight (Round Model) | Approx. 1011 g |
| Cartridge Type | 26 or 35 mm ceramic disc |
| Compatibility | All standard basins, pressure-resistant hot water systems |
7. Warranty and Support
Information regarding specific warranty terms for this product is not provided in this manual. For warranty claims or technical support, please refer to your purchase documentation or contact the retailer where the product was purchased.
For spare parts availability, information is currently unavailable.