1. Introduction
Welcome to the user manual for your KOVHIHAV Replacement Battery. This manual provides essential information for the safe and effective use, installation, and maintenance of your new battery. Please read this manual thoroughly before use and retain it for future reference.
This replacement battery is designed for compatibility with various Visonic Next CAM series devices, ensuring reliable power for your security equipment.
2. Safety Information
WARNING: Improper use of batteries can result in fire, explosion, or other hazards. Please observe the following safety precautions:
- This battery is a primary (non-rechargeable) battery. DO NOT ATTEMPT TO RECHARGE.
- Avoid over-charge, over-discharge, over-heat, over-current, and short-circuit conditions.
- Do not crush, puncture, or disassemble the battery pack.
- Do not store or expose the battery to temperatures above 60°C (140°F).
- Do not dispose of the battery in fire or water.
- Only replace with the battery pack designated for your specific product model.
- Keep batteries out of reach of children.
3. What's in the Box
Your package should contain the following items:
- KOVHIHAV Replacement Battery (Quantity as ordered)
4. Product Specifications
| Specification | Value |
|---|---|
| Voltage | 6.0V |
| Capacity | 1350mAh / 8.10Wh |
| Dimensions | 35.50 x 34.00 x 17.82mm (1.4 x 1.34 x 0.7 inches) |
| Weight | 34.5g |
| Battery Cell Composition | Lithium Ion |
| Manufacturer | KOVHIHAV |
| Item Model Numbers | 103-302891, 103-302915 |
5. Compatibility
This KOVHIHAV replacement battery is compatible with the following Visonic models:
- Visonic Next CAM
- Visonic Next CAM K9 PG2 Wide Angle
- Visonic Next CAM PG2
- Visonic Next CAM PGS
It is also a suitable replacement for batteries with the following part numbers:
- 103-302891
- 103-302915
- EVE2CR17450-C
- GP2CR123A
- OSA363
Before purchase, please ensure that the part number (P/N) of your original battery matches one of the supported part numbers listed above.
6. Setup and Installation
Follow these general steps to replace the battery in your compatible Visonic device. Always refer to your device's specific manual for detailed instructions if available.
- Power Off Device: Ensure your Visonic device is completely powered off and disconnected from any external power sources before proceeding.
- Locate Battery Compartment: Identify and open the battery compartment on your device. This may require a small screwdriver.
- Remove Old Battery: Carefully disconnect the old battery from its connector. Note the orientation of the connector.
- Insert New Battery: Connect the KOVHIHAV replacement battery to the device's battery connector. Ensure the connector is securely seated and correctly oriented. Do not force the connection.

Image: Close-up of the battery's white two-pin connector with red and black wires. Ensure this matches your device's connector.
- Secure Battery: Place the new battery into the compartment, ensuring it fits snugly without obstruction.
- Close Compartment: Close and secure the battery compartment cover.
- Power On Device: Power on your Visonic device and verify proper operation.

Image: Two blue KOVHIHAV replacement batteries with red and black wires and white connectors.
7. Operating Instructions
Once installed, the KOVHIHAV replacement battery will provide power to your Visonic Next CAM series device. As this is a primary (non-rechargeable) battery, no charging is required or possible. The device will draw power from the battery until its capacity is depleted.
Monitor your device's battery indicator (if available) to determine when replacement is necessary. Performance may degrade as the battery nears the end of its life.
8. Maintenance and Storage
To ensure optimal performance and longevity of your battery, consider the following:
- Storage: Store unused batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Disposal: Dispose of depleted batteries according to local regulations. Do not discard with household waste. Many electronic stores or recycling centers accept used batteries.
- Cleaning: Keep battery terminals clean and free from dirt or corrosion.
- Handling: Avoid dropping or subjecting the battery to strong impacts.
9. Troubleshooting
If you encounter issues after installing the replacement battery, consider the following:
- Device Not Powering On:
- Ensure the battery connector is fully and correctly inserted.
- Verify the battery is seated properly in its compartment.
- Check if the battery is new and not depleted.
- Confirm the battery is the correct model and part number for your device.
- Short Battery Life:
- Ensure the device is operating within its normal parameters.
- Verify the battery is not old or expired.
- Environmental factors (extreme cold/heat) can affect battery performance.
If problems persist, please contact customer support.
10. Warranty and Support
KOVHIHAV stands behind the quality of its products. Your replacement battery comes with:
- 14-Day Money Back Guarantee: If you are not satisfied with your purchase, you may return it within 14 days for a full refund.
- 12-Month Warranty: This battery is covered by a 12-month warranty against manufacturing defects.
Your satisfaction is important to us. If you have any questions, concerns, or require assistance, please do not hesitate to contact our customer support team. We are available 24/7 via email and aim to reply within 24 hours.
For support, please contact us through the platform where you purchased the product or refer to the contact information provided with your order.