KAMIWI No Stud TV Wall Mount Instruction Manual

Introduction

Thank you for choosing the KAMIWI No Stud TV Wall Mount. This innovative mount is designed for easy installation on drywall, eliminating the need for studs or drilling. It provides a secure and low-profile solution for mounting your 12-55 inch flat screen television. Please read this manual thoroughly before installation to ensure proper setup and safe operation.

Image: The KAMIWI No Stud TV Wall Mount attached to the back of a television, demonstrating its low-profile design.

Important Safety Information

Please observe the following safety precautions to prevent personal injury or property damage:

• Do not exceed the maximum weight capacity of 100 lbs (45 kg).
• Ensure the drywall thickness is greater than 0.3 inches (7.6 mm).
• This mount is designed for drywall installation only. Do not install on plaster, concrete, brick, or metal studs.
• Always use a level to ensure the mount is installed horizontally.
• Keep all small parts away from children.
• If you are unsure about any part of the installation process, seek professional assistance.

Package Contents

Verify that all components are present before beginning installation:

Image: A comprehensive view of all items included in the KAMIWI No Stud TV Wall Mount package, including the main mounting rails, various sizes of bolts (M4, M5, M6, M8), bolt washers, a small bubble level, and 25 nails.

• 1x Wall Plate (Upper Rail)
• 1x TV Bracket (Lower Rail)
• 25x Nails
• 1x Mini Level
• Various M4, M5, M6, M8 Bolts (different lengths)
• Bolt Washers

Specifications

Image: Visual representation of the mount's compatibility with TVs from 12 to 55 inches and a maximum load capacity of 100 lbs.

Image: A diagram illustrating various VESA mounting patterns supported by the mount, including 100x100mm, 200x200mm, 300x300mm, 400x400mm, 400x300mm, 400x200mm, 300x200mm, and 200x100mm.

Setup and Installation

The KAMIWI No Stud TV Wall Mount offers a quick and easy 3-step installation process.

Image: A visual guide showing the three main steps for installation: attaching TV brackets, mounting the wall plate, and hanging the TV.

Step 1: Attach TV Brackets to your TV

1. Carefully place your TV face down on a soft, clean surface to prevent scratches.
2. Identify the VESA mounting holes on the back of your TV.
3. Select the appropriate bolts (M4, M5, M6, or M8) and washers that fit your TV's VESA holes. Ensure the bolts are not too long, which could damage internal components.
4. Align the TV bracket (lower rail) with the VESA holes and secure it using the selected bolts and washers. Ensure it is centered and securely fastened.

Step 2: Mount Wall Plate on the Wall

Image: A hammer and nail next to the wall mount, with icons indicating "No Stud" and "No Drill" methods, highlighting the ease of installation on drywall.

Image: Close-up of the mount showing foam sheathing on the back, designed to protect walls during installation.

1. Determine the desired height for your TV. Hold the wall plate (upper rail) against the wall at this height.
2. Use the included mini level to ensure the wall plate is perfectly horizontal.
3. Using a hammer, gently tap the nails through the pre-drilled holes in the wall plate until it is securely fastened to the drywall. Ensure all 25 nails are used for maximum stability.
4. The mount features foam sheathing on the back to protect your wall during installation.

Step 3: Hang your TV on the Wall Plate

Image: A close-up of the safety lock mechanism on the TV mount, designed to secure the TV firmly in place and prevent accidental dislodgement.

Image: A television mounted on the wall, demonstrating the low-profile design, with the TV sitting only 1 inch from the wall.

1. Carefully lift your TV with the attached TV bracket.
2. Align the TV bracket with the wall plate and gently lower the TV until the bracket hooks securely onto the wall plate.
3. Ensure the TV is level and centered. The central groove design and safety lock feature will help keep the TV firmly in place.
4. Gently push the bottom of the TV towards the wall to engage the safety lock. This prevents the TV from accidentally lifting off the mount.

Operating Your Mounted TV

Once your TV is securely mounted, you can enjoy your entertainment setup. The fixed design of this mount provides a stable and clean aesthetic.

• The mount holds your TV close to the wall, saving space and providing a sleek appearance.
• Ensure all cables are properly routed and not pinched between the TV and the wall.
• For optimal viewing, position your seating directly in front of the mounted TV.

Maintenance

Regular maintenance helps ensure the longevity and safety of your TV mount:

• Periodically check all screws and nails to ensure they remain tight and secure.
• Inspect the mount for any signs of wear, damage, or corrosion.
• Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Do not hang additional items or apply excessive force to the mounted TV.

Troubleshooting

If you encounter any issues during or after installation, refer to the following common problems and solutions:

• TV is not level: Ensure the wall plate was installed using the included level. If not, carefully remove the nails, adjust the wall plate, and re-secure it.
• Mount feels loose: Verify that all 25 nails are fully inserted and secure. Ensure the drywall is in good condition and meets the minimum thickness requirement.
• TV does not fit the mount: Double-check your TV's VESA pattern against the mount's compatibility (100x100mm to 400x400mm) and ensure your TV size is within the 12-55 inch range.
• Bolts do not fit TV: Use the correct diameter and length of bolts provided in the package. If none fit, you may need to acquire specific bolts for your TV model.
• TV is difficult to hang: Ensure the TV bracket is correctly aligned with the wall plate. Do not force the TV onto the mount.

Warranty and Support

KAMIWI products are manufactured with quality and durability in mind. For specific warranty details, please refer to the product packaging or contact KAMIWI customer support.

If you require further assistance, have questions about installation, or need to report a defective part, please contact KAMIWI customer service through the retailer's platform or the official KAMIWI website. Please have your model number (KAMIWI-A1-12-55) and purchase information ready when contacting support.