Hydro-Force Panorama Inflatable Stand Up Paddle Board User Manual

1. Introduction

Welcome to the user manual for your Hydro-Force Panorama Inflatable Stand Up Paddle Board. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your paddle board. Please read it thoroughly before first use and keep it for future reference.

2. Safety Information

WARNING:

• Keep away from naked flame or direct heat sources.
• Always wear a personal flotation device (PFD) when using the paddle board.
• Do not use in strong currents, high winds, or stormy weather conditions.
• Ensure the leash is properly attached to prevent the board from drifting away.
• Never exceed the maximum weight capacity of 150 kg (330 lbs).
• Children should only use the paddle board under direct adult supervision.

3. Components and What's Included

Your Hydro-Force Panorama SUP package includes all the necessary items to get you on the water:

• 1 x Inflatable Paddle Board (Hydro-Force Panorama)
• 1 x Adjustable Paddle
• 1 x Hand Pump
• 1 x Backpack
• 1 x Coiled Leash
• 1 x Detachable Center Fin
• 1 x Repair Kit

Figure 3.1: Overview of all included components for the Hydro-Force Panorama SUP.

4. Setup and Inflation

4.1 Unpacking and Preparing

1. Unroll the paddle board on a clean, flat surface, free from sharp objects.
2. Locate the high-pressure valve on the board.

4.2 Inflation

1. Ensure the valve pin is in the 'up' position (closed for inflation). If it's down, press it to pop it up.
2. Connect the hose of the hand pump to the board's valve by twisting it clockwise until secure.
3. Begin pumping. The board will take shape. Continue pumping until the pressure gauge on the pump reads 15 PSI (1.034 Bar). The board should feel very firm.
4. Once inflated, quickly disconnect the pump hose and replace the valve cap to prevent air leakage.

Figure 4.1: The included hand pump for efficient inflation.

4.3 Attaching the Fin

1. Slide the detachable center fin into the fin box located on the underside of the board until it clicks into place. Ensure it is securely locked.

4.4 Assembling the Paddle

1. Assemble the paddle sections.
2. Adjust the paddle length so that when standing, the handle reaches your wrist when your arm is extended overhead. Secure the adjustment clamp.

4.5 Attaching the Leash

1. Attach one end of the coiled leash to the D-ring at the tail of the board.
2. Attach the other end of the leash to your ankle or calf. This is a critical safety measure.

Figure 4.2: Detailed diagram illustrating the board's dimensions and key features for setup.

5. Operating the Paddle Board

5.1 Getting Started

Begin in calm, shallow water. Kneel on the board first to get a feel for its stability before attempting to stand. The wide traction pad provides excellent grip.

Figure 5.1: The wide traction pad ensures a secure, non-slip grip for stability.

5.2 Paddling Techniques

Hold the paddle with one hand on the top of the handle and the other on the shaft. Use your core muscles, not just your arms, to propel the board. Keep your gaze forward, not down at your feet, to maintain balance.

Figure 5.2: Proper paddling posture for efficient movement and balance.

5.3 Using the Built-in Viewing Window

The Hydro-Force Panorama features a unique built-in viewing window, allowing you to observe the underwater environment. For optimal clarity, ensure the window is clean and free from debris. In choppy water or areas with suspended particles, visibility through the window may be reduced.

Figure 5.3: The integrated viewing window offers a unique perspective of the water below.

Figure 5.4: The viewing window provides an engaging experience for users of all ages.

6. Maintenance and Storage

6.1 Cleaning

After each use, rinse the paddle board thoroughly with fresh water to remove salt, sand, and dirt. Use a mild soap if necessary. Ensure the board is completely dry before deflating and storing to prevent mold and mildew.

6.2 Deflation

1. Remove the valve cap.
2. Press the valve pin down and twist it to lock it in the 'open' position. Air will begin to escape.
3. Roll the board tightly from the nose towards the tail to expel all remaining air.

6.3 Storage

Store the deflated and dry paddle board in its backpack in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid folding the board sharply to prevent damage to the material.

6.4 Repair Kit

The included repair kit can be used for minor punctures. Follow the instructions provided with the repair kit for proper application. For larger damage, professional repair may be required.

7. Troubleshooting

7.1 Viewing Window Clarity Issues

Problem: The viewing window appears cloudy, turns white, or offers poor visibility.

Possible Causes & Solutions:

• Water Quality: The clarity of the viewing window is highly dependent on the clarity of the water. In murky, silty, or choppy water, visibility will naturally be poor. Move to clearer, calmer water for best results.
• Scratches/Wear: Over time, the window material may develop minor scratches or hazing from use. Clean gently with a soft cloth and fresh water. Avoid abrasive cleaners.
• Condensation: Temperature differences between the air inside the board and the water outside can cause condensation. This usually dissipates as temperatures equalize.

7.2 Hand Pump Not Functioning Properly

Problem: The hand pump does not seem to inflate the board effectively or feels like it's not building pressure.

Possible Causes & Solutions:

• Valve Pin Position: Ensure the valve pin on the board is in the 'up' position (closed) for inflation. If it's down, air will escape.
• Hose Connection: Verify that the pump hose is securely twisted onto the board's valve. A loose connection will cause air leakage.
• Pump Seal: Check the O-rings and seals on the pump hose and inside the pump itself for any damage or dryness. A small amount of silicone grease can help maintain the seals.
• Debris in Valve: Inspect the board's valve for any sand or debris that might be preventing it from sealing properly.
• Defective Pump: If all checks fail, the pump itself might be defective. Contact customer support for assistance.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Bestway website. Keep your proof of purchase for any warranty claims.