Philips Air Performer 7000 Series

1. Introduction

The Philips Air Performer 7000 Series is a versatile 2-in-1 appliance designed to purify the air and provide cooling airflow. This device effectively removes 99.97% of invisible particles from the air and intelligently adapts its performance to maintain a clean and comfortable environment year-round.

Image 1.1: Front view of the Philips Air Performer 7000 Series unit.

2. Safety Information

Before operating the appliance, please read this user manual carefully and keep it for future reference. Failure to follow these instructions may result in electric shock, fire, or other injuries or damage.

• Ensure the appliance is placed on a stable, level surface.
• Do not block the air inlets or outlets.
• Unplug the appliance before cleaning or performing any maintenance.
• Keep the appliance out of reach of children.
• Use only original Philips replacement filters.

3. Package Contents

Verify that all components are present in the package:

• Philips Air Performer 7000 Series unit
• NanoProtect HEPA and Active Carbon Filter (pre-installed or separate)
• Remote control
• User Manual

4. Setup

4.1 Unpacking

1. Carefully remove the appliance and all packaging materials from the box.
2. Remove any protective films or stickers from the unit.

4.2 Filter Installation (if not pre-installed)

1. Ensure the appliance is unplugged.
2. Open the filter cover, typically located at the bottom or rear of the unit.
3. Remove the new filter from its protective packaging.
4. Insert the filter into the appliance, ensuring it is correctly seated.
5. Close the filter cover securely.

Image 4.1: Diagram illustrating the multi-layer NanoProtect HEPA and active carbon filter system.

4.3 Placement

• Place the air purifier on a firm, level surface.
• Maintain at least 20 cm (8 inches) of clear space around the air inlets and outlets for optimal airflow.
• Connect the power plug to a wall outlet.

5. Operating Instructions

5.1 Control Panel and Display

The appliance features an intuitive control panel and a digital display that shows real-time air quality, temperature, and humidity.

Image 5.1: Top view of the control panel with power, mode, and fan speed buttons.

5.2 Power On/Off

Press the power button on the unit or remote control to turn the appliance on or off.

5.3 Operating Modes

The Philips Air Performer offers various operating modes:

• Auto Mode: The appliance automatically adjusts fan speed based on detected air quality using AeraSense sensors.
• Manual Speed: Select from 10 manual fan speeds for customized airflow.
• Turbo Mode: Provides maximum purification and cooling for rapid results.
• Sleep Mode: Operates at a whisper-quiet 20 dB(A) with dimmed display lights for undisturbed rest.

Image 5.2: The appliance operating in quiet sleep mode in a bedroom environment.

5.4 Airflow Adjustment

The patented Dual Flow motor allows for fully adjustable airflow, switching between direct cooling and diffused air circulation. The unit can also oscillate up to 350 degrees to distribute purified air throughout the room.

Image 5.3: Visual representation of the adjustable airflow capabilities.

5.5 Smart Features and App Control

The Air Performer is equipped with AI technology that detects air quality and analyzes user habits to optimize purification performance, noise levels, and energy consumption. Connect the appliance to the Philips Air+ app for enhanced control and monitoring.

• Real-time Monitoring: View indoor and outdoor air quality, PM2.5 levels, temperature, and humidity.
• Remote Control: Adjust settings, change modes, and set schedules from your smartphone.
• Smart Scheduler: Program the appliance to operate according to your daily routine.
• Voice Control: Compatible with Amazon Alexa and Google Home.

Image 5.4: The Philips Air+ app interface for monitoring and controlling the device.

6. Maintenance

6.1 Cleaning the Appliance

• Always unplug the appliance before cleaning.
• Wipe the exterior surfaces with a soft, dry cloth.
• Do not use abrasive cleaners or solvents.

6.2 Filter Replacement

The appliance is equipped with a smart filter alert system that precisely calculates filter lifespan based on pollution levels and operating time. An indicator on the display or in the Air+ app will notify you when the filter needs replacement.

1. Unplug the appliance.
2. Open the filter access panel.
3. Remove the used filter and dispose of it properly.
4. Insert a new Philips NanoProtect HEPA and Active Carbon Filter (Model: FYM860/30, if applicable).
5. Close the filter access panel.
6. Plug in the appliance and reset the filter lifetime counter as per the on-screen instructions or app.

Image 6.1: Illustration of replacing the air filter in the unit.

Image 6.2: A Philips replacement filter for the Air Performer series.

7. Troubleshooting

If you encounter issues with your Philips Air Performer, refer to the following common problems and solutions:

For more detailed troubleshooting, please refer to the complete user manual or contact customer support.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the documentation included with your purchase or visit the official Philips website. For technical support or inquiries regarding spare parts, please contact Philips customer service in your region. Information regarding spare parts availability is not provided in this document.