1. Introduction
This manual provides essential information for the proper use and storage of Healthcaretuye Hemoglobin Test Strips. These strips are designed for quantitative measurement of hemoglobin in whole blood samples when used with BHM-101 or BHM-102 Hemoglobin Meters. Please read this manual thoroughly before use to ensure accurate results and safe operation.
2. Important Safety Information
Legal Disclaimer: Please operate according to the instructions. Incorrect operation may lead to errors in results.
- For in vitro diagnostic use only. Do not ingest.
- Keep out of reach of children.
- Do not use expired test strips.
- Always consult a healthcare professional for interpretation of test results.
3. Package Contents
- 50x Hemoglobin Test Strips
- 50x Lancets (for sample collection)
Note: These test strips are exclusively designed for use with BHM-101 and BHM-102 Hemoglobin Meters.
The image displays the Healthcaretuye Hemoglobin Test Strips package, including a vial containing test strips, the outer box indicating 'Hemoglobin Test Strip (Dry Chemistry)' and '25strips/box', and several individual test strips laid out, some showing a black sample area and others with red indicator lines.
4. Product Specifications
| Feature | Specification |
|---|---|
| Test Time | ≤ 15 seconds |
| Measurement Range | 4.5g/dL-25.6 g/dL (45g/L-256 g/L) |
| Sample Volume | 10 µL |
| Sample Type | Whole blood (capillary blood and venous whole blood) |
| Precision (HB 4.5-10.0g/dL) | SD ≤ 0.8g/dL |
| Precision (HB 10.1-25.6g/dL) | CV ≤ 8% |
| Accuracy (HB 4.5-10.0g/dL) | Bias ≤ ±1g/dL |
| Accuracy (HB 10.1-25.6g/dL) | Bias ≤ ±10% |
5. Setup
- Ensure your BHM-101 or BHM-102 Hemoglobin Meter is clean and functioning correctly.
- Wash and dry your hands thoroughly before handling test strips or performing a test.
- Open the vial of test strips only when ready to perform a test. Close the cap immediately after removing a strip to protect remaining strips from moisture.
- Verify the code on the test strip vial matches the code displayed on your hemoglobin meter. If codes do not match, calibrate your meter according to its specific instructions or contact customer support.
6. Operating Instructions
Follow these steps to perform a hemoglobin test:
- Prepare the Meter: Turn on your BHM-101 or BHM-102 Hemoglobin Meter. Ensure it is ready for testing and the displayed code matches the test strip vial.
- Obtain a Blood Sample: Use a fresh lancet to obtain a 10 µL whole blood sample. Capillary blood (e.g., from a fingertip) or venous whole blood can be used. Refer to your meter's manual for detailed blood collection procedures.
- Apply Blood to Test Strip: Carefully apply the blood sample to the designated sample application area on the test strip. Do not smear the blood. The strip will draw the blood in automatically.
- Insert Test Strip: Insert the test strip into the meter as directed by your meter's instructions. Ensure it is fully inserted.
- Read Results: The meter will automatically begin the test. The result will be displayed within approximately 15 seconds. Record your result if necessary.
- Dispose of Used Materials: Safely dispose of the used test strip and lancet in a sharps container or according to local regulations for biohazardous waste.
7. Maintenance and Storage
- Storage: Store test strips in their original vial with the cap tightly closed, in a cool, dry place, away from direct sunlight and heat. Do not refrigerate.
- Shelf Life: Discard any unused test strips 3 months after first opening the vial, or by the expiration date printed on the vial, whichever comes first. Write the opening date on the vial for reference.
- Handling: Handle test strips with clean, dry hands. Do not bend, cut, or alter the test strips.
8. Troubleshooting
If you encounter issues during testing, consider the following:
- Incorrect Readings: Ensure the test strip code matches the meter's code. Verify the blood sample volume is sufficient (10 µL) and applied correctly. Check the expiration date of the strips. Ensure the meter is clean and calibrated.
- Meter Error Messages: Refer to your BHM-101 or BHM-102 Hemoglobin Meter's user manual for specific error codes and their solutions.
- No Result Displayed: Confirm the test strip is fully inserted into the meter. Ensure the meter's battery level is adequate.
If problems persist, contact Healthcaretuye customer support or your healthcare provider.
9. Warranty and Support
For product inquiries, technical assistance, or to report any issues, please contact Healthcaretuye customer support. Refer to the packaging or the Healthcaretuye official website for contact information.
You can also visit the official Healthcaretuye Store on Amazon for more information and products.
