Ultimate Unicorn Waterfall Bathroom Sink Faucet (Model DJS-MP-PB-BN-A) Instruction Manual

1. Product Overview

The Ultimate Unicorn Waterfall Bathroom Sink Faucet is designed to enhance your bathroom with its modern aesthetic and reliable functionality. Constructed from high-quality SUS304 Stainless Steel, this faucet offers durability and a sleek brushed nickel finish. It features two handles for precise control over water temperature and flow, along with a unique waterfall spout design.

Key Features:

• High Quality Construction: Made from SUS304 Stainless Steel for durability and wear resistance.
• Modern Waterfall Spout: Provides a visually appealing water flow.
• Dual Handle Control: Two handles allow for precise adjustment of hot and cold water.
• Easy to Clean: Smooth, anti-fingerprint surface simplifies maintenance.
• Integrated Pop-Up Drain: Includes a sturdy metal pop-up sink drain stopper.

2. Package Contents

Verify that all components listed below are included in your package before beginning installation.

Image: All components of the Ultimate Unicorn Waterfall Bathroom Sink Faucet laid out, including the main faucet body, handles, hot and cold supply lines, mounting hardware, and the metal pop-up drain stopper.

• Waterfall Bathroom Sink Faucet Assembly
• Two (2) Hot and Cold Water Supply Lines (3/8 inch standard)
• Metal Pop-Up Sink Drain Stopper with Built-in Strainer
• Mounting Hardware (nuts, washers, gaskets)
• Instruction Manual

3. Specifications

4. Safety Information

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in personal injury or property damage.

• Always turn off the main water supply before beginning any plumbing work.
• Wear appropriate personal protective equipment, such as safety glasses, during installation.
• Ensure all connections are tight to prevent leaks, but do not overtighten.
• If you are unsure about any part of the installation process, consult a qualified plumber.

5. Setup & Installation

This faucet is designed for easy installation on most two-hole or three-hole bathroom sinks. The following steps will guide you through the process.

Pre-Installation Checklist:

• Ensure your sink has either two or three holes with a suitable size of 0.85-1.38 inches.
• Confirm your bathroom sink is not thicker than 1.18 inches.
• Gather necessary tools: adjustable wrench, plumber's putty or silicone sealant, screwdriver.

Image: A detailed diagram illustrating the dimensions of the faucet and its components, including spout height, base width, and handle spacing.

Image: A visual guide indicating that the faucet is compatible with two-hole and three-hole sink setups, with a note on suitable hole and sink thickness measurements.

Installation Steps:

1. Turn Off Water Supply: Locate and turn off the hot and cold water supply valves under your sink.
2. Remove Old Faucet: Disconnect the old faucet's supply lines and mounting hardware, then remove the old faucet.
3. Prepare New Faucet: If your sink has three holes, place the included deck plate over the holes. Apply plumber's putty or silicone sealant around the base of the new faucet.
4. Mount Faucet: Insert the faucet body and handles through the sink holes. From underneath the sink, secure the faucet with the provided washers and mounting nuts.
5. Connect Supply Lines: Attach the hot and cold water supply lines to the corresponding inlets on the faucet and to your water supply valves. Ensure connections are hand-tight, then use a wrench for a quarter-turn more.
6. Install Pop-Up Drain: Follow the separate instructions for installing the metal pop-up drain stopper into the sink drain hole. Ensure a watertight seal.
7. Test for Leaks: Slowly turn on the main water supply and check all connections for leaks. Run the faucet to ensure proper operation.

6. Operating Instructions

The Ultimate Unicorn Waterfall Bathroom Sink Faucet is designed for intuitive use with its dual lever handles and integrated pop-up drain.

Water Flow and Temperature Control:

Image: A close-up view of the faucet's two lever handles, with red and blue indicators for hot and cold water, demonstrating how to adjust temperature and flow.

• Hot Water: Turn the left handle counter-clockwise to increase hot water flow.
• Cold Water: Turn the right handle counter-clockwise to increase cold water flow.
• Temperature Adjustment: Mix hot and cold water by adjusting both handles to achieve your desired temperature.
• Flow Adjustment: The further the handles are turned, the greater the water flow from the waterfall spout.

Pop-Up Drain Stopper:

Image: A detailed view of the metal pop-up drain stopper, showing its push-button mechanism and integrated strainer for easy debris removal.

• To Close Drain: Press down firmly on the center of the drain stopper.
• To Open Drain: Press down firmly on the center of the drain stopper again.
• The integrated strainer helps prevent clogs by catching debris.

7. Maintenance

Regular cleaning and proper care will ensure the longevity and appearance of your Ultimate Unicorn Waterfall Bathroom Sink Faucet.

Cleaning:

• Clean the faucet regularly with a soft cloth and mild soap or a non-abrasive cleaner.
• Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the brushed nickel finish.
• Wipe the faucet dry after each use to prevent water spots and maintain its anti-fingerprint properties.
• Periodically remove the pop-up drain stopper to clean any accumulated hair or debris from the strainer.

8. Troubleshooting

If you encounter any issues with your faucet, refer to the following common problems and solutions.

• Low Water Flow: Check if the water supply valves are fully open. Inspect the aerator (if applicable) or the spout for mineral buildup and clean if necessary.
• Leaks from Faucet Base: Ensure the mounting nuts under the sink are securely tightened. Check that the gaskets and O-rings are correctly seated.
• Leaks from Supply Lines: Verify that the supply line connections are tight at both the faucet and the water supply valves. Replace worn washers if needed.
• Drain Stopper Not Sealing: Check for any debris preventing the stopper from fully closing. Ensure the stopper is correctly installed and aligned.

If the problem persists after attempting these solutions, please contact customer support.

9. Warranty and Support

Ultimate Unicorn is committed to providing high-quality products and excellent customer service.

• For any questions, concerns, or assistance with your product, please refer to the contact information provided with your purchase or visit the official Ultimate Unicorn website.
• We value your satisfaction and are dedicated to helping you resolve any issues you may encounter.