Introduction
This instruction manual provides detailed information for the installation, operation, and troubleshooting of the Semzohc W11101906 Washer Water Inlet Valve. This component is crucial for controlling the flow of hot and cold water into your washing machine, ensuring proper filling and operation. It is designed as a direct replacement part for various washer models, restoring optimal performance and addressing common water-related issues.
Product Overview
Image of the Semzohc W11101906 Washer Water Inlet Valve, showing its overall design with red and blue connectors and wiring.
Image illustrating the Semzohc water inlet valve submerged in water, with text highlighting common washer problems it resolves: water leaking, no hot or cold water, irregular water flow, and failure to fill with water.
Diagram showing the dimensions of the W11101906 Washer Water Inlet Valve, indicating its length (9.3 inches), width (7 inches), and depth (3.9 inches).
Image displaying the W11101906 Washer Water Inlet Valve along with a list of compatible replacement part numbers (W11101906, W11210463, W10701461, W10869803, W10883458, W11038696) and a description of its function: controlling water flow for correct hot and cold water entry.
Image showing the water inlet valve with a list of compatible washer brands and models, including Admiral (ATW4516MW0), Roper (RTW4516FW2), Crosley (CAW11544EW2, CAW8350EW2), Whirlpool (WTW4616FW3, WTW4816FW3), Inglis (ITW4671EW1, ITW4871FW3, ITW4971EW1), and Amana (NTW4655EW1, NTW4516FW2, NTW4516FW3, NTW4516FW4, NTW4605EW1, NTW4665GW0).
Close-up views of the W11101906 Washer Water Inlet Valve highlighting its long-lasting life, sturdy quality material, and the inclusion of an additional 10-pin harness adapter for versatile compatibility.
Official Product Videos
Video demonstrating the physical features and components of the W11101906 Washer Water Inlet Valve, including its connectors and wiring. This provides a visual guide to the product's design.
Video showcasing the water inlet valve's function, demonstrating how it controls water flow for washing machines. This helps understand the operational aspect of the valve.
Specifications
| Attribute | Value |
|---|---|
| Material | Plastic |
| Item Dimensions (L x W x H) | 9.3 x 6.7 x 3 inches |
| Item Weight | 13.4 ounces |
| Inlet Connection Size | 6.7 Inches |
| Inlet Connection Type | Waterproof |
| Outlet Connection Type | Waterproof |
| Number of Ports | 2 |
| Outlet Connection Size | 6.7 Inches |
| Valve Type | Solenoid Valve |
| Manufacturer | Jointgo |
| Model Info | W11101906 |
| Country of Origin | China |
Compatibility
The W11101906 Washer Water Inlet Valve is compatible with a wide range of washing machine models from various brands. Key compatible models include:
- Whirlpool: WTW4616FW3, WTW4816FW3
- Inglis: ITW4671EW1, ITW4871FW3, ITW4971EW1
- Crosley: CAW11544EW2, CAW8350EW2
- Amana: NTW4655EW1, NTW4516FW2, NTW4516FW3, NTW4516FW4, NTW4605EW1, NTW4665GW0
- Roper: RTW4516FW2
- Admiral: ATW4516MW0
This valve also replaces part numbers: W11101906, W11210463, W10701461, W10869803, W10883458, W11038696.
Setup and Installation
Replacing a washer water inlet valve typically involves disconnecting power and water, accessing the old valve, disconnecting hoses and wiring, installing the new valve, and reconnecting everything. While specific steps may vary by washer model, general safety precautions and procedures apply.
Safety Precautions:
- Always disconnect the washer from the power supply before beginning any repair.
- Turn off the hot and cold water supply valves to the washer.
- Drain any residual water from the hoses into a bucket.
- Wear appropriate personal protective equipment, such as gloves.
General Installation Steps:
- Prepare the Washer: Disconnect power and water supply. Move the washer away from the wall to access the rear panel.
- Access the Valve: Remove the screws securing the rear access panel of the washer. Carefully remove the panel to expose the internal components, including the water inlet valve.
- Disconnect Old Valve: Disconnect the electrical connectors and water hoses from the old valve. Note the orientation of the hoses (hot and cold) to ensure correct reinstallation.
- Remove Old Valve: Unscrew or unclip the old water inlet valve from its mounting bracket.
- Install New Valve: Secure the new W11101906 valve into the mounting bracket. Reconnect the hot and cold water hoses to their respective inlets on the new valve. Ensure connections are tight to prevent leaks.
- Reconnect Wiring: Attach the electrical connectors to the new valve. If an additional 10-pin harness adapter is included and needed for your model, use it to ensure proper electrical connection.
- Test and Reassemble: Turn on the water supply and check for leaks. Reconnect the power supply and run a short wash cycle to confirm proper operation. Once confirmed, reattach the rear access panel.
Operating Principle
The W11101906 Washer Water Inlet Valve operates as an electrically controlled solenoid valve. When the washing machine's control board sends an electrical signal, the solenoids within the valve open, allowing water from your home's supply lines to enter the washer tub. There are typically separate solenoids for hot and cold water, enabling the washer to mix water to achieve the desired wash temperature. The valve closes when the appropriate water level is reached or when the wash cycle progresses to the next stage, preventing overfilling.
Maintenance
While the water inlet valve itself requires minimal maintenance, ensuring the longevity and proper function of your washing machine and its components involves general care:
- Check Water Hoses: Periodically inspect the water inlet hoses for cracks, bulges, or leaks. Replace them if any damage is observed.
- Clean Inlet Screens: The water inlet valve typically has small screens where the hoses connect. These screens can become clogged with sediment over time, restricting water flow. Turn off water, disconnect hoses, and clean these screens regularly.
- Prevent Freezing: In colder climates, ensure your washing machine area is adequately heated to prevent water in the valve and hoses from freezing, which can cause damage.
Troubleshooting
The W11101906 water inlet valve is designed to resolve several common washing machine issues. If you experience any of the following problems, replacing the water inlet valve may be the solution:
- Water Not Running into the Washer: If the washer fails to fill with water, or fills very slowly, the valve might be faulty or clogged.
- Water Leaking: Leaks around the valve area or from the washer itself can indicate a cracked valve housing or loose connections.
- Inability to Fill Up with Cold or Hot Water: If only hot or only cold water is entering the tub, or neither, one of the solenoids in the valve may have failed.
- Noisy Operation: A loud screeching or humming noise during filling can often be attributed to a failing water inlet valve.
- Irregular Water Flow: Inconsistent water pressure or flow during filling cycles.
Always ensure power and water supply are properly connected and hoses are not kinked before concluding the valve is the issue.
Warranty and Support
Semzohc is committed to providing quality products. If you encounter any quality problems with your W11101906 washer water inlet valve during use, please contact our customer support. We aim to resolve your issues within 12 hours of your inquiry. Please refer to your purchase documentation for specific warranty terms and contact information.