1. Introduction
This manual provides instructions for the installation and maintenance of the Semzohc W11217817 Washer Suspension Rod Kit. This kit is designed to support the washer tub and maintain its stability during operation, particularly when handling unbalanced loads. The W11217817 suspension rod kit is 26.45 inches in length and features an upgraded material for enhanced rigidity, durability, and extended service life.
The kit addresses common issues such as a washer that shakes, vibrates excessively, operates out of balance, or produces unusual noise during cycles.
Image 1.1: Semzohc W11217817 Washer Suspension Rod Kit components.
2. Product Specifications
- Part Number: W11217817
- Length: 26.45 inches
- Item Weight: 1.65 pounds
- Package Dimensions: 27.6 x 3.45 x 2.8 inches
- Included Components: 4 Washer Suspension Rods, 4 Suspension Ball Housings, 4 Suspension Balls
- Manufacturer: Jointgo
- Replaces Part Numbers: W11217817, W11159470, W11226768, AP6329793, 4844566, PS12349409, EAP12349409, PD00056457
Image 2.1: Product dimensions of the suspension rod and related components.
3. Compatibility
The W11217817 Washer Suspension Rod Kit is compatible with various washing machine models from Whirlpool, Maytag, Amana, Inglis, and Crosley. Please verify your washer's model number against the lists below to ensure compatibility.
Compatible Whirlpool Washer Models:
- WTW4655JW0, WTW4655JW1, WTW4655JW2
- WTW4850HW0, WTW4850HW1, WTW4850HW2, WTW4850HW3
- WTW4855HW0, WTW4855HW1, WTW4855HW2, WTW4855HW3
- WTW4950HW0, WTW4950HW1, WTW4950HW2, WTW4950HW3
- WTW4955HW0, WTW4955HW1, WTW4955HW2
- 4KWTW5600JW1, 4KWTW5700JW1, 4KWTW5800JW0, 4KWTW5900JW0, 4KWTW5900JW1
- 8TWTW4955JW1
Compatible Maytag Washer Models:
- MVWC465HW0, MVWC465HW1, MVWC465HW2, MVWC465HW3, MVWC465HW4
- 4KMVWC410JW0, 4KMVWC410JW1
- 4KMVWC420JW0, 4KMVWC420JW1
- 4KMVWC430JW0, 4KMVWC430JW1
- 4KMVWC440JW0, 4KMVWC440JW1
- 7MMVWC465JW0
Compatible Amana Washer Models:
- NTW4519JW0, NTW4519JW1, NTW4519JW2
- 4KNTW3100JW0, 4KNTW3100JW1
- 4KNTW3200JW0, 4KNTW3200JW1
- 4KNTW3300JW0, 4KNTW3300JW1
- 11020362810, 11025122810, 11020362811, 11025122811, 11020362812, 11020362813
Compatible Inglis Washer Models:
- ITW4880HW0, ITW4880HW1, ITW4880HW2, ITW4880HW3
Compatible Crosley Washer Models:
- CAW38125HW0, CAW38125HW1
Image 3.1: Partial list of compatible washer models.
4. Installation Instructions
Follow these steps to install the W11217817 Washer Suspension Rod Kit. It is recommended to consult your washer's specific service manual for detailed disassembly instructions and safety precautions before beginning.
- Preparation: Disconnect the washer from its power source. Remove any screws or fasteners securing the washer's top cover. Carefully open or remove the top cover to access the internal components. You will typically find four suspension rods located in the four corners of the washer tub assembly.
- Rod Removal: Lift the washer tub slightly to relieve tension on the existing suspension rods. Carefully lift and remove one old suspension rod at a time. It is advisable to replace rods one by one to maintain tub alignment.
- New Rod Installation: Install a new suspension rod into the corresponding position. Ensure the rod is properly seated in both the washer frame and the tub assembly. Repeat this process for the remaining three suspension rods.
- Reassembly: Once all new suspension rods are installed, gently lower the washer tub. Reattach the washer's top cover and secure it with the removed screws or fasteners. Reconnect the washer to its power source.
Image 4.1: Detailed view of suspension rod components.
5. Maintenance
Regular inspection of your washer's suspension system can help prevent future issues. While these suspension rods are designed for durability, periodic checks are recommended.
- Visual Inspection: Periodically inspect the suspension rods for any signs of wear, bending, or damage. Check the springs for corrosion or deformation.
- Washer Stability: If you notice your washer beginning to shake excessively, vibrate, or become noisy during cycles, it may indicate wear in the suspension system.
- Load Management: Avoid consistently overloading your washing machine, as this can put undue stress on the suspension rods and other components, leading to premature wear.
Image 5.1: Product features emphasizing durability and precision.
6. Troubleshooting
The W11217817 Suspension Rod Kit is designed to resolve specific washer performance issues. If your washer exhibits any of the following symptoms, inspecting or replacing the suspension rods may be necessary:
- Washer Shakes and Vibrates: Excessive movement or vibration during wash or spin cycles.
- Out of Balance: The washer tub appears to be off-center or struggles to balance loads.
- Noisy Operation: Unusual banging, clanging, or thumping sounds, especially during agitation or spin.
- Suspension Rod Broken: Visible damage or breakage of existing suspension rods.
If these symptoms persist after inspecting or replacing the suspension rods, further diagnosis by a qualified technician may be required.
Image 6.1: Common washer symptoms indicating a need for suspension rod inspection.
7. Support
If you are uncertain whether this item fits your specific washer model or require further assistance, please contact the manufacturer or your appliance service professional.
For general inquiries or to verify product fit, refer to the product listing or contact Semzohc customer support.