Tetipa Dimmable LED Ceiling Light (Model Yezi-9)

1. Introduction

Thank you for choosing the Tetipa Dimmable LED Ceiling Light, Model Yezi-9. This modern ceiling light features a unique flower-shaped design, offering adjustable brightness and color temperature (3000K-6500K) to suit various moods and activities. It can be controlled conveniently via the included remote control or a dedicated smartphone application. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your light fixture.

Figure 1: Tetipa Dimmable LED Ceiling Light, 9-Head Model Yezi-9.

2. Safety Instructions

Please read these safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Professional Installation Recommended: Installation should be performed by a qualified electrician or a person with sufficient knowledge of electrical systems to avoid electric shock.
• Power Disconnection: Always ensure the main power supply is turned off at the circuit breaker before attempting any installation, maintenance, or cleaning.
• Voltage Compatibility: Verify that the voltage supply in your location matches the operating voltage of the light fixture (110-265V).
• Secure Mounting: Ensure the ceiling structure can support the weight of the light fixture (approximately 4 kg). Use appropriate mounting hardware for secure installation.
• Avoid Water Exposure: This product is designed for indoor use only and is not water-resistant. Do not install in damp or wet locations.
• No User-Serviceable Parts: Do not attempt to disassemble or modify the light fixture. There are no user-serviceable parts inside.
• Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.

3. Package Contents

Carefully unpack the box and ensure all items listed below are present and undamaged. If any parts are missing or damaged, please contact customer support immediately.

• Tetipa Dimmable LED Ceiling Light Fixture (Model Yezi-9)
• Remote Control
• Mounting Hardware (screws, wall anchors)
• Small Screwdriver
• Flat Wrench
• User Manual (this document)

4. Setup and Installation

The Tetipa Dimmable LED Ceiling Light requires assembly and ceiling mounting. It is recommended to have two people for installation. Ensure the power is OFF at the circuit breaker before starting.

4.1 Product Dimensions

Figure 2: Product dimensions. The 9-head model measures approximately 80cm (31.5 inches) in diameter and 11cm (4.3 inches) in height.

4.2 Materials and Design

Figure 3: The light fixture is constructed from iron and aluminum for durability and corrosion resistance, with an acrylic lampshade providing soft, strong light transmission. It features a new LED light source for brighter, more energy-efficient, and longer-lasting illumination compared to traditional light sources.

4.3 General Installation Steps

1. Prepare the Installation Area: Turn off the main power supply at the circuit breaker. Clear the area around the installation point on the ceiling.
2. Assemble the Fixture: The light fixture arrives partially disassembled. Carefully attach the light branches to the main base using the provided screws and tools. Ensure all connections are secure. Note: A user review mentions needing to remove adhesive from LEDs before reassembling branches to the base. Please check for any protective films or adhesives that need removal during assembly.
3. Mark Drilling Points: Hold the mounting bracket against the ceiling at the desired installation location and mark the drilling points for the wall anchors.
4. Drill Holes and Insert Anchors: Drill holes at the marked points and insert the appropriate wall anchors.
5. Mount the Bracket: Secure the mounting bracket to the ceiling using the provided screws.
6. Wire Connections: Connect the household electrical wires to the light fixture's wires according to local electrical codes. Typically, this involves connecting live to live, neutral to neutral, and ground to ground. Ensure all connections are tight and insulated.
7. Attach the Fixture: Carefully lift the assembled light fixture and attach it to the mounting bracket, securing it with the provided screws.
8. Restore Power: Once the fixture is securely mounted and all connections are checked, restore power at the circuit breaker.

If you encounter any difficulties during installation, please consult a qualified electrician or contact customer support.

5. Operation

Your Tetipa LED Ceiling Light can be controlled using the included remote control or a smartphone application.

5.1 Remote Control Pairing

To use the remote control, it must first be paired with the light fixture:

1. Ensure the light fixture is connected to power and the wall switch is in the OFF position.
2. Turn on the light fixture using the wall switch.
3. Within 5 seconds of turning on the light, press the "WiFi" button (often labeled "SETUP" or with a WiFi icon) on the remote control.
4. The light fixture will flash to indicate successful pairing.

If pairing fails, turn off the light, wait 10 seconds, and repeat the process. If multiple attempts are unsuccessful, please contact customer support.

5.2 Remote Control Functions

Figure 4: Remote control layout and button functions.

• Power On/Off: Buttons to turn the light on and off.
• Brightness Adjustment: Increase (+) or decrease (-) the light brightness.
• Color Temperature Adjustment: Increase (+) or decrease (-) the color temperature (from warm white to cool white).
• Color Temperature Switch: Cycle through preset color temperatures (e.g., 3000K, 4500K, 6500K).
• Full Brightness / Half Brightness: Quickly switch between maximum brightness and 50% brightness.
• Night Light Mode: Activates a low-brightness, warm light setting for night use.
• Pairing Button (SETUP/WiFi icon): Used for pairing the remote control with the light fixture.
• Timer Function: Note: The timer function is currently not supported.

5.3 APP Control

Figure 5: The light can be controlled via a wall switch, mobile application, or remote control.

For smartphone application control, locate the QR code on the side of your remote control or request an image of the QR code from customer support to download the compatible app. Follow the in-app instructions to connect your light fixture to your Wi-Fi network and control it from your mobile device.

5.4 Memory Function

The light fixture includes a memory function. If the light is turned off using the remote control or app, it will retain the last brightness and color temperature settings when turned back on. To utilize this feature, ensure the wall switch remains in the ON position, and control the light solely through the remote or app.

5.5 Adjustable Lighting

Figure 6: The light offers adjustable color temperatures from 3000K (warm white) to 6000K (cool white) and dimmable brightness from 100% to 20%.

The light allows for seamless adjustment of both brightness and color temperature. You can transition from a warm, cozy 3000K light to a bright, cool 6500K light, and dim the brightness from 100% down to a low setting. This flexibility allows you to create the perfect ambiance for any activity or mood.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Tetipa LED Ceiling Light.

• Cleaning: Before cleaning, ensure the power supply to the light fixture is turned off. Use a soft, dry, or slightly damp cloth to wipe the surface of the fixture. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish or acrylic components.
• Inspection: Periodically inspect the light fixture for any signs of damage, loose connections, or wear. If any issues are found, turn off the power and contact customer support.
• Bulb Replacement: The LED light source is integrated and not designed for user replacement. The fixture has a long lifespan of over 30,000 hours.

7. Troubleshooting

If you encounter any issues with your Tetipa LED Ceiling Light, please refer to the following troubleshooting guide:

For issues not covered here, please contact customer support.

8. Specifications

Detailed technical specifications for the Tetipa Dimmable LED Ceiling Light (Model Yezi-9).

Figure 7: EU Energy Label for Tetipa YZ-005 (similar model, indicating energy efficiency). Energy class A, 62 kWh/1000h.

For detailed product data sheet, refer to: https://eprel.ec.europa.eu/qr/2100219

Figure 8: Examples of the Tetipa LED Ceiling Light installed in different room environments, including bedrooms and living rooms.

9. Warranty and Support

Tetipa is committed to providing high-quality products and customer satisfaction.

• After-Sales Service: For any questions regarding product installation, operation, or if you encounter any issues, please contact our customer support team. We aim to respond as soon as possible to assist you.
• Product Condition: Please check the condition of the product immediately upon receipt. If there are any damages or missing parts, report them to customer support without delay.
• Contact Information: Refer to your purchase documentation or the seller's information on the platform where you purchased the product for specific contact details.