Introduction
This manual provides comprehensive instructions for the safe and efficient use, assembly, and maintenance of your Baasha Ergonomic Reclining Hair Salon Chair, Model BS1040092-BLK. Please read this manual thoroughly before assembly and operation to ensure proper function and longevity of your product.
Safety Information
- Weight Limit: Ensure proper assembly and do not exceed the 330-pound weight limit to avoid potential stability issues or damage to the chair.
- Assembly: Follow all assembly instructions carefully. Do not use power tools for assembly unless specified, as this may overtighten screws and damage components.
- Stability: Always ensure the chair is on a flat, stable surface before use.
- Movement: When moving the chair, lift it rather than dragging to prevent damage to the base or flooring.
- Children: Keep children away from the chair during assembly and operation to prevent injury.
Parts List
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 1 x Salon Chair Seat and Backrest Assembly
- 1 x Hydraulic Pump Base
- 1 x Footrest Assembly
- 1 x Removable Headrest
- 1 x Instruction Manual (this document)
- 1 x Tools (Allen wrench, etc.)
- Hardware (screws, washers, etc.)
Setup and Assembly
Follow these steps to assemble your Baasha Ergonomic Reclining Hair Salon Chair.
Step 1: Attach the Hydraulic Pump to the Base
Place the hydraulic pump into the center hole of the chrome base. Ensure it is seated firmly and securely.
Image: Hydraulic pump assembly.
Step 2: Attach the Footrest
Secure the footrest assembly to the designated attachment points on the hydraulic pump using the provided hardware. Ensure all screws are tightened securely.
Image: Footrest attachment.
Step 3: Mount the Chair Seat
Carefully align the chair seat assembly with the top of the hydraulic pump. Lower the seat onto the pump, ensuring it locks into place. You may need to rotate the seat to find the correct alignment.
Image: Chair seat mounting.
Step 4: Insert the Headrest
Insert the removable headrest into the slot at the top of the chair's backrest. Adjust its height for client comfort.
Image: Headrest insertion.
Assembly Video
Video: This video demonstrates the assembly process for the Baasha Reclining Hair Salon Chair.
Operating Instructions
Adjusting Chair Height
To adjust the chair's height, locate the hydraulic lever typically found on the side of the chair, beneath the seat. Press the lever down to lower the chair or pump it up and down to raise it. Release the lever to lock the height in place.
Reclining the Backrest
To recline the backrest, locate the reclining lever, usually on the side of the chair. Pull the lever to release the lock and gently push back on the backrest to achieve the desired angle. Release the lever to lock the backrest in position. The chair reclines up to 135 degrees.
Image: Reclining mechanism.
Swivel Function
The chair features a 360-degree swivel function. Simply rotate the chair to the desired orientation. The hydraulic pump ensures smooth rotation.
Adjusting the Headrest
The headrest is removable and adjustable. Pull it up or push it down to set the appropriate height for client comfort. Ensure it is securely seated before use.
Maintenance
- Cleaning: Wipe clean the PU leather surface with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners, as these can damage the material.
- Frame Care: Regularly check all bolts and screws to ensure they are tight. Retighten as necessary to maintain stability.
- Hydraulic Pump: Keep the hydraulic pump clean and free of debris. If the pump becomes stiff or noisy, consult a professional for maintenance.
- Footrest: Periodically check the footrest for any looseness and tighten connections if needed.
Image: Cleaning the PU leather.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not raise or lower | Hydraulic pump issue or lever not engaged. | Ensure the hydraulic lever is fully engaged. If the issue persists, the hydraulic pump may require professional inspection or replacement. |
| Chair wobbles or feels unstable | Loose connections or uneven floor. | Check and tighten all assembly bolts and screws. Ensure the chair is placed on a flat, level surface. |
| Backrest does not recline or lock | Reclining mechanism jammed or lever not engaged. | Ensure the reclining lever is fully pulled or pushed. Check for any obstructions in the reclining mechanism. |
| Footrest is loose | Mounting screws are loose. | Tighten the screws securing the footrest to the chair base. |
Specifications
- Brand: Baasha
- Model Name: BS1040092-BLK
- Color: Black and Gold
- Material: Metal (Frame), Sponge (Fill), PU Leather (Furniture Finish)
- Product Dimensions: 30"D x 25"W x 40"H
- Item Weight: 50 Pounds
- Maximum Weight Recommendation: 330 Pounds
- Reclining Position Count: 1 (up to 135 degrees)
- Furniture Base Movement: 360° Swivel
- Included Components: 1* salon chair, 1* Instruction, 1*Tools
- Product Care Instructions: Wipe Clean
Image: Product dimensions and features.
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Baasha website. Keep your purchase receipt for warranty claims.
Baasha Beauty Flagship Store: Visit Store