Introduction
Welcome to the user manual for your new PHILIPS Series 7000 Electric Hair Straightener, model BHS752/00. This manual provides essential information on how to safely and effectively use, maintain, and troubleshoot your appliance. Please read this manual thoroughly before first use and keep it for future reference.
Safety Information
Your safety is paramount. Please observe the following warnings and precautions:
- Warning: Keep away from water. Do not use this appliance near bathtubs, showers, basins, or other vessels containing water.
- Always unplug the appliance immediately after use.
- Avoid direct contact of the heated plates with skin to prevent burns.
- Keep out of reach of children.
- Do not use the appliance if the cord or plug is damaged.
- Do not attempt to repair the appliance yourself. Contact authorized service personnel.
Product Overview
The PHILIPS Series 7000 Hair Straightener BHS752/00 features ceramic plates for smooth styling and is designed for efficient hair straightening. Its metallic intense violet finish provides a sleek look.
Figure 1: The Philips Series 7000 Hair Straightener (BHS752/00) in metallic intense violet, showcasing its ceramic plates and sleek design. A blue light effect indicates the heating function.
Figure 2: A detailed view of the control panel on the Philips Series 7000 Hair Straightener, highlighting the power button and temperature adjustment controls for precise styling.
Figure 3: The retail packaging for the Philips Series 7000 Hair Straightener, illustrating its key features such as ThermoShield technology, mineral ionic care, ceramic argan-oil infused plates, floating plates, and 35% smoother plates.
Setup
- Unpack: Carefully remove the straightener and all accessories from the packaging. Retain the packaging for storage or future transport.
- Inspect: Check the appliance for any visible damage. Do not use if damaged.
- Placement: Place the straightener on a heat-resistant, flat surface away from water sources.
- Plug In: Insert the power plug into a suitable electrical outlet. Ensure the voltage matches the specifications of your appliance.
Operating Instructions
- Power On: Press and hold the power button until the indicator light illuminates.
- Select Temperature: Use the temperature control buttons (if available) to select your desired heat setting. Allow the straightener to heat up for approximately 30-60 seconds. The indicator light may change or stop blinking when ready.
- Prepare Hair: Ensure your hair is clean, dry, and tangle-free. For best results, apply a heat protectant spray.
- Straighten Hair: Take a small section of hair (about 1-2 inches wide) and place it between the heating plates, close to the roots. Gently clamp the plates together and glide the straightener slowly down the hair section from root to tip.
- Repeat: Repeat the process for all sections of your hair until desired straightness is achieved.
- Power Off: After use, press and hold the power button to turn off the appliance. Unplug it from the electrical outlet.
- Cool Down: Allow the straightener to cool completely on a heat-resistant surface before storing.
Maintenance
- Cleaning: Ensure the straightener is unplugged and completely cool before cleaning. Wipe the exterior and heating plates with a soft, damp cloth. Do not use abrasive cleaners or immerse the appliance in water.
- Storage: Store the straightener in a dry, safe place, away from moisture and extreme temperatures. You may use the original packaging for storage.
- Cord Care: Do not wrap the power cord tightly around the appliance, as this can damage the cord. Store the cord loosely.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on. | Not plugged in correctly, power outlet issue, or damaged cord. | Ensure the plug is fully inserted. Test the outlet with another device. Check the cord for damage; if damaged, do not use and contact support. |
| Appliance not heating up. | Not powered on, temperature setting too low, or internal fault. | Ensure the appliance is powered on. Increase the temperature setting. If still not heating, contact support. |
| Hair is not straightening effectively. | Hair is too wet, sections are too large, or temperature is too low. | Ensure hair is completely dry. Use smaller sections of hair. Increase the temperature setting if suitable for your hair type. |
Specifications
| Feature | Detail |
|---|---|
| Brand | PHILIPS |
| Model Name | BHS752/00 |
| Product Dimensions (L x W x H) | 10.7 x 23.2 x 10 cm; 840 grams |
| Power Source | Corded Electric |
| Heating Surface Material | Tourmaline |
| Material | Stainless Steel Ceramic |
| Color | Black (as per specifications, though product image shows violet) |
| Hair Type | All Hair Types |
| Product Benefits | Straightening |
| Units | 1 Total |
Warranty and Support
For warranty information and customer support, please refer to the warranty card included with your product or visit the official PHILIPS website. You can also contact PHILIPS customer service for assistance with product registration, troubleshooting, or repair services.
Online Support: www.philips.com/support