Pasotim Smart Robot Vacuum and Mop Combo User Manual

1. Important Safety Instructions

Please read all safety instructions carefully before using this appliance and retain them for future reference. Improper use may result in electric shock, fire, or serious injury.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Only use the original power adapter and charging cable provided by the manufacturer. Using an incompatible power source may cause damage to the product or fire.
• Do not operate the robot vacuum in wet environments or near water.
• Do not use the robot vacuum to pick up large debris, sharp objects, liquids, or burning/smoking materials.
• Ensure the dust bin is properly installed before operation.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Do not use the robot vacuum on elevated surfaces without barriers.
• Turn off the power switch and unplug the charging cable before cleaning or performing maintenance.

2. Product Overview

The Pasotim Smart Robot Vacuum is a 2-in-1 robotic cleaning device designed for efficient vacuuming and mopping. Its super-thin design allows it to clean under furniture, and its quiet operation ensures minimal disturbance.

Key Features:

• 2-in-1 Vacuuming & Mopping: Capable of both dry vacuuming and wet mopping (without a water tank, using a wet cloth).
• Strong Suction: Upgraded 1500Pa suction power effectively picks up pet hair, crumbs, dirt, and debris.
• Quiet Operation: Designed to operate quietly, suitable for use while working or sleeping.
• Super-Slim Design: Low profile allows cleaning under beds, sofas, and other furniture.
• Long Battery Life: Provides up to 90 minutes of continuous cleaning on a single charge.
• Easy Control: Simple one-button operation for starting cleaning cycles.
• Versatile Cleaning: Suitable for hardwood, tile, low pile carpet, laminate, and stone floors.

Product Components:

3. Setup

3.1 Unpacking

• Carefully remove the robot vacuum and all accessories from the packaging.
• Check the package contents against the product description to ensure all parts are present: 1 x Robot Vacuum, 1 x USB cable.
• Remove any protective films or stickers from the robot vacuum.

3.2 Charging the Robot Vacuum

Before first use, fully charge the robot vacuum. A full charge typically takes several hours.

1. Locate the battery port on the side of the robot vacuum (refer to Figure 2.2).
2. Connect the provided USB cable to the battery port on the robot vacuum.
3. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a powered USB port.
4. The indicator light on the robot vacuum will show the charging status (e.g., solid light for charging, off for fully charged).

3.3 Installing Side Brushes

The side brushes help sweep debris into the vacuum's path. Ensure they are securely attached.

1. Turn the robot vacuum upside down.
2. Align the side brushes with the brush posts on the bottom of the robot (refer to Figure 2.2).
3. Press the brushes down until they click into place.

4. Operating Instructions

4.1 Preparing the Cleaning Area

• Remove any large obstacles, loose cables, or small items from the floor that could entangle the robot.
• For mopping, ensure a wet cloth is attached to the designated area on the bottom of the robot.

4.2 Starting a Cleaning Cycle

The robot vacuum features a simple one-button start for convenience.

1. Ensure the robot vacuum is fully charged.
2. Place the robot vacuum on the floor in the area you wish to clean.
3. Press the power button located on the top of the robot (refer to Figure 2.1). The robot will begin its cleaning cycle.
4. To pause or stop cleaning, press the power button again.

4.3 2-in-1 Vacuuming and Mopping

This robot vacuum combines sweeping and mopping functions. For mopping, simply attach a wet cleaning cloth to the bottom of the device. The robot will then sweep and mop simultaneously, leaving your floor cleaner with a single pass.

• Vacuuming: The robot uses its powerful suction and side brushes to collect dust, dirt, and debris.
• Mopping: Attach a damp, clean cloth to the designated area on the underside of the robot. The robot will then glide over the floor, wiping as it vacuums. Note: This model does not have an integrated water tank; the cloth must be pre-wetted.

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your robot vacuum.

5.1 Emptying the Dust Bin

Empty the dust bin after each cleaning cycle or when it appears full.

1. Turn off the robot vacuum.
2. Locate the dust port/bin on the robot (refer to Figure 2.2).
3. Open the dust bin compartment and carefully remove the bin.
4. Empty the contents into a trash receptacle.
5. Clean any remaining dust or debris from the bin and filter.
6. Reinsert the dust bin securely into the robot.

5.2 Cleaning the Side Brushes

Inspect and clean the side brushes regularly to remove tangled hair or debris.

1. Turn off the robot vacuum and turn it upside down.
2. Gently pull the side brushes upwards to remove them from their posts.
3. Remove any hair or debris wrapped around the brushes or brush posts.
4. Reattach the brushes by pressing them down until they click into place.

5.3 Cleaning the Wheels

Periodically check the universal wheel and rear wheels for tangled hair or debris that could impede movement.

1. Turn off the robot vacuum and turn it upside down.
2. Carefully remove any hair or debris from around the universal wheel and the rear dual wheels.
3. Ensure the wheels can rotate freely.

5.4 Battery Care

• Always use the provided USB cable for charging.
• Avoid completely draining the battery frequently.
• If storing the robot for an extended period, charge it fully and then turn it off. Recharge every 3 months to maintain battery health.

6. Troubleshooting

If you encounter issues with your robot vacuum, please refer to the following common problems and solutions.

7. Specifications

Technical specifications for the Pasotim Smart Robot Vacuum.

8. Warranty and Support

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.

• Manufacturer: Pasotim
• ASIN: B0BKPNJRNJ
• Date First Available: October 27, 2022