Product Overview
The JT Eaton Jawz Safe-Tee Rat and Mouse Bait Station, Model 969, provides a secure and reusable solution for rodent control. This tamper-resistant station is designed to protect bait from children and non-target animals when properly anchored. It features large, dual entrances suitable for rats and includes bait holder rods and a key for secure operation.
Image: The JT Eaton Jawz Safe-Tee Rat and Mouse Bait Station in its closed state, showing its compact and secure design.
Safety Information
- Always read and follow all instructions and warnings on the rodenticide bait packaging before use.
- Wear protective gloves when handling bait.
- Place bait stations in areas inaccessible to children, pets, and non-target wildlife.
- Anchor the bait station securely to prevent it from being moved or opened by unauthorized individuals or animals.
- Dispose of dead rodents and leftover bait according to local regulations.
- Store the bait station key in a secure location away from children.
Package Contents
- 1 x JT Eaton Jawz Safe-Tee Rat and Mouse Bait Station
- 4 x Bait Holder Rods
- 1 x Safe-Tee Key
Setup Instructions
- Unlock the Station: Insert the provided Safe-Tee key into the lock mechanism on the side of the bait station. Turn the key to unlock and lift the lid.
- Insert Bait: Place rodenticide bait blocks onto the internal bait holder rods. Ensure the bait is securely fastened and cannot be easily removed by rodents. The station is designed to hold multiple bait blocks.
- Close and Secure: Close the lid of the bait station firmly until it clicks into place. Ensure the station is fully locked to maintain its tamper-resistant properties.
- Anchor the Station: For maximum security and to prevent relocation by rodents or other animals, anchor the bait station. Use wire, screws, or adhesive to secure it to a fixed surface or the ground.
Image: The bait station lid is open, revealing the interior and the key positioned next to it.
Image: Bait blocks are shown secured onto the rods inside the open bait station.
Operating Instructions
- Placement: Position the bait station in areas where rodent activity has been observed, such as along walls, in corners, or near entry points. The dual entrances allow rodents to enter from either side.
- Monitoring: Regularly inspect the bait station to check for bait consumption. The frequency of inspection depends on the level of rodent infestation.
- Refilling Bait: When bait has been consumed, unlock the station with the key and replenish the bait blocks as needed. Always wear protective gloves during this process.
- Continued Use: The bait station is reusable. Continue to monitor and refill bait until signs of rodent activity cease.
Maintenance
- Cleaning: Periodically clean the bait station to remove debris, dirt, or old bait. Use warm, soapy water and rinse thoroughly. Allow to dry completely before refilling with new bait.
- Inspection for Damage: Inspect the station for any signs of damage, such as cracks or chew marks, that could compromise its tamper-resistant features. Replace damaged stations immediately.
- Storage: When not in use, clean the bait station and store it in a cool, dry place away from children and pets.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Rodents are not entering the station. |
|
|
| Bait is not being consumed. |
|
|
| Station appears damaged or compromised. |
|
|
Specifications
| Model Number | 969 |
| Brand | JT Eaton |
| Product Dimensions | 10"L x 8"W x 12"H |
| Item Weight | 14.1 ounces |
| Number of Pieces | 1 (Bait Station, rods, and key) |
| Target Species | Rat, Mouse |
| Power Source | Manual |
| UPC | 076706969002 |
| ASIN | B0BKH6DWPN |
Image: A diagram showing the length, width, and height dimensions of the bait station.
Warranty and Support
For warranty information or product support, please contact JT Eaton customer service directly. Refer to the product packaging or the official JT Eaton website for the most current contact details and warranty terms.
Official Website: www.jteaton.com