SMANOW Running Boards Side Steps

1. Introduction

This manual provides detailed instructions for the proper installation, operation, and maintenance of your SMANOW Running Boards Side Steps. Please read this manual thoroughly before beginning installation to ensure correct fitment and safe use. Retain this manual for future reference.

2. Compatibility

These running boards are designed for:

• 2005-2026 Nissan Frontier Crew Cab with 4 full-size doors.

Important: Not compatible with King Cab models (2 full-size front doors & narrower rear doors). Please verify your vehicle's cab type before installation.

3. What's in the Box

Verify that all components are present before beginning installation:

• Left Running Board (1)
• Right Running Board (1)
• Mounting Brackets (Set)
• Hardware Kit (Bolts, Washers, Nuts)
• Installation Instructions (This Manual)

4. Features

• Material: Constructed from heavy-duty carbon steel with a dual-stage textured black powder-coated finish for durability and corrosion resistance.
• Wide Drop Step Design: Features a 4.7-inch drop-off, providing an ergonomic step height for easier entry and exit from the vehicle.
• Non-Slip Tread: Step pads are equipped with a special non-slip tread pattern to ensure superior traction in various weather conditions.
• High Strength: Designed to support a maximum load of over 450 pounds. The 3-inch tube design minimizes the gap between the bar and the vehicle frame.
• Hardened Plastic End Caps: Eliminates sharp corners, cushions against gravel splashes, and provides a finished appearance.

5. Installation Instructions

No drilling or modification is required for installation. Follow these steps carefully:

1. Identify Components: Separate the left and right running boards, mounting brackets, and hardware. Refer to the parts list in Section 3.
2. Locate Mounting Points: Identify the factory mounting points on your vehicle's frame. These are typically pre-drilled holes.
3. Attach Brackets: Secure the appropriate mounting brackets to the vehicle's frame using the provided hardware. Do not fully tighten bolts at this stage.
4. Position Running Boards: Carefully lift and position the running board onto the attached brackets. Align the holes on the running board with the holes on the brackets.
5. Secure Running Boards: Attach the running boards to the brackets using the remaining hardware. Ensure all bolts are hand-tightened.
6. Adjust and Tighten: Adjust the running boards for proper alignment and desired position. Once satisfied, fully tighten all bolts securely.
7. Repeat for Other Side: Follow the same steps for installing the running board on the opposite side of the vehicle.

For a visual guide, please refer to the installation video below:

6. Operating Instructions

To use your SMANOW Running Boards:

• Step onto the running board with one foot, ensuring your foot is placed firmly on the non-slip tread.
• Use the running board as a stable step to assist in entering or exiting your vehicle.
• Ensure the running boards are clear of ice, snow, mud, or debris before stepping to maintain traction.

7. Maintenance

To ensure the longevity and appearance of your running boards:

• Regular Cleaning: Wash the running boards regularly with mild soap and water to remove dirt, road salt, and debris. Rinse thoroughly.
• Inspect Hardware: Periodically check all mounting bolts and hardware for tightness. Re-tighten as necessary to prevent loosening due to vehicle vibration.
• Check for Damage: Inspect the running boards for any signs of damage, such as dents, scratches, or rust. Address any issues promptly to prevent further deterioration.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the powder-coated finish.

8. Troubleshooting

• Running Board Feels Loose: If the running board feels unstable, check all mounting bolts. Re-tighten any loose bolts according to the installation instructions.
• Unusual Noises: Squeaking or rattling may indicate loose hardware. Inspect and tighten all connections.
• Difficulty Stepping: Ensure the non-slip tread is clean and free of obstructions.

9. Specifications

10. Warranty

This product comes with a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.

11. Support

For further assistance, technical support, or warranty claims, please contact SMANOW customer service through the official SMANOW store on Amazon or refer to the contact information provided with your purchase documentation.

Visit the SMANOW Store for more products and information.