1. Introduction
This manual provides detailed instructions for the OMAIC RC-802V Voice Replacement Remote Control, designed for use with compatible TCL Smart TVs. This remote offers enhanced functionality, including Google Voice search, and is built for durability and ease of use.
2. Setup
2.1. Battery Installation
The remote requires two AAA batteries (not included). Follow these steps to install them correctly:
- Step One: Move the back cover of the remote control in the direction of the arrow to open the battery compartment.
- Step Two: Insert two AAA batteries, ensuring the positive (+) and negative (-) electrodes are aligned correctly as indicated inside the compartment.
- Step Three: Snap the back cover firmly back into place until it clicks.
2.2. Pairing with Your TV
To enable full functionality, especially voice control, you must pair the remote with your TCL Smart TV. Ensure the TV is powered on and within close proximity (ideally within 3 feet) during the pairing process.
- Hold down the "OK" button and the "Home" button simultaneously on the remote control.
- Continue holding both buttons for 3 to 10 seconds until a pairing confirmation appears on your TV screen.
- Release the buttons once pairing is successful.
3. Operating Instructions
3.1. Button Functions
Familiarize yourself with the functions of each button on your OMAIC RC-802V remote control:
- Power Button: Turns the TV on and off.
- Settings Button: Displays the TV settings menu.
- Home Button: Returns to the home screen.
- Options Button: Opens the Option menu.
- Back Button: Returns to the previous screen.
- Source Button: Opens the input source shortcut.
- Google Assistant Button: Activates Google Assistant (only available when the TV is connected to the internet).
- Channel Buttons (CH+/CH-): Changes channels.
- Volume Buttons (VOL+/VOL-): Raises and lowers volume. Press and hold the VOL- button for about 3 seconds to mute the sound.
- Virtual Keyboard Button: Opens the virtual keyboard on screen.
- Netflix Button: Direct access to Netflix.
- YouTube Button: Direct access to YouTube.
3.2. Voice Control Functionality
The OMAIC RC-802V remote features integrated Google Voice functionality, allowing for convenient voice commands. Simply press the Google Assistant button and speak your command.
For optimal performance, ensure your TV is connected to the internet when using voice commands. The remote supports a responsive range of up to 10 meters, with fastest response times within 8 meters.
3.3. Product Overview Video
Watch this official product video for a visual overview of the OMAIC RC-802V remote control's features and functionality.
3.4. Compatibility
This voice replacement remote is compatible with a wide range of TCL Smart TV models and universal TCL remote models:
Compatible TCL Smart TV Models:
- 43P30FS, 32P30S, 49P30FS, 32S6500A, 65P8S, 65P8, 55P8S, 55P8, 55EP680, 50P8S, 50P8, 49S6800FS, 49S6800, 49S6510FS, 32S6500, 32S6500S, 32S6800S, 32S6510S, 32A325, 32A323, 32S6800, 40S6500, 40S6500FS, 40S6800FS, 40S6510FS, 40S6800, 40S6500FS, 40S6510FS, 40S6800, 43S6500FS, 43S6800FS, 43S6500, 43S6500FS, 40A325, 40A323, 43S6510FS.
Compatible TCL Remote Models:
- RC802V series, RC802N series, RC901V series, RC902N series, RC860 series, RC890 series.
4. Maintenance
To ensure the longevity and optimal performance of your OMAIC RC-802V remote control, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the remote's surface. Avoid using liquid cleaners or abrasive materials, which can damage the finish or internal components.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or it stops functioning. Always replace both batteries at the same time with new AAA batteries. Dispose of used batteries responsibly according to local regulations.
- Storage: Store the remote in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Protection: Avoid dropping the remote or exposing it to excessive force, as this can cause internal damage.
5. Troubleshooting
If you encounter issues with your OMAIC RC-802V remote control, refer to the following common troubleshooting steps:
- Remote Not Responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new AAA batteries.
- Ensure there are no obstructions between the remote and the TV's infrared receiver.
- Voice Control Not Working:
- Ensure the remote is properly paired with your TV (refer to Section 2.2).
- Verify that your TCL Smart TV is connected to the internet, as Google Assistant requires an active network connection.
- Speak clearly and directly into the remote's microphone.
- Buttons Not Functioning Correctly:
- Try re-pairing the remote with your TV (refer to Section 2.2).
- Clean the remote's surface, especially around the buttons, to remove any debris that might be causing sticking.
- If specific buttons are unresponsive, and battery replacement/re-pairing doesn't help, the remote may require replacement.
- Short Remote Distance:
- Ensure there are no strong light sources or electronic devices interfering with the remote's signal.
- Replace batteries if they are low.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | RC-802V |
| Product Dimensions | 1.5 x 0.59 x 6.1 inches |
| Item Weight | 1.76 ounces |
| Batteries Required | 2 AAA batteries |
| Special Feature | Voice Search (Google Assistant) |
| Color | Black |
| Max Number of Supported Devices | 1 |
| Compatible Devices | Television |
7. Warranty and Support
OMAIC is committed to providing high-quality replacement remote controls and excellent customer service. We focus on the quality and compatibility of our products.
If you have any questions, concerns, or require assistance with your OMAIC RC-802V remote control, please do not hesitate to contact our professional after-sale service team. We aim to reply to all inquiries within 12 hours on working days.
For support, please refer to the contact information provided with your purchase or visit the official OMAIC store on Amazon: OMAIC Store.
