1. Introduction
Thank you for choosing the Philips Meranti 3-Light LED Recessed Spot. This practical lighting fixture is designed to provide excellent illumination with a long lifespan, suitable for various indoor settings. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting product.
Image 1.1: The Philips Meranti 3-Light LED Recessed Spot in an illuminated setting.
2. Safety Information
Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Electrical Installation: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- Power Disconnection: Always disconnect power at the circuit breaker or fuse box before installing, servicing, or cleaning the fixture.
- Voltage: Ensure the supply voltage is compatible with the fixture's requirements.
- Bulb Type: Use only GU10 LED bulbs as specified. Do not exceed the maximum wattage of 35 Watts per spot.
- Heat: LED bulbs can generate heat. Allow the fixture and bulbs to cool before handling.
- Environment: This fixture is designed for indoor use only. Do not expose to water or high humidity.
- Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
3. Package Contents
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, do not attempt to install the product and contact customer support.
- 1 x Philips Meranti 3-Light LED Recessed Spot fixture
- Mounting hardware (screws, wall anchors)
- Instruction Manual
Note: GU10 LED bulbs are not included and must be purchased separately.
4. Product Overview and Dimensions
The Philips Meranti spot features an elegant and modern design with three adjustable spotlights, ideal for directing light where needed. It is constructed from durable metal.
Image 4.1: Detailed view of the Philips Meranti 3-Light LED Recessed Spot.
Dimensions
Image 4.2: Product dimensions (all measurements in millimeters).
- Length: 47.4 cm (474 mm)
- Width: 15.5 cm (155 mm)
- Height: 8 cm (80 mm)
- Weight: 500 grams
5. Setup and Installation
Professional installation is recommended for this product. Ensure you have the necessary tools (screwdriver, wire strippers, drill, etc.) and safety equipment before proceeding.
- Turn Off Power: Locate the circuit breaker controlling the light fixture's location and turn off the power. Verify power is off using a voltage tester.
- Prepare Mounting Surface: Mark the desired mounting location on the ceiling. Use the fixture's base as a template for drilling pilot holes for the mounting screws.
- Install Mounting Bracket: Secure the mounting bracket (if separate) to the ceiling using the provided screws and wall anchors.
- Wire Connections: Connect the electrical wires from the ceiling to the fixture's wires. Typically, this involves connecting live to live (black/brown), neutral to neutral (white/blue), and ground to ground (green/yellow). Ensure all connections are secure with wire nuts.
- Mount the Fixture: Carefully attach the fixture to the mounting bracket, ensuring no wires are pinched. Secure it with the provided screws.
- Install GU10 Bulbs: Insert GU10 LED bulbs into each of the three spotlights. Align the pins of the bulb with the sockets and push gently, then twist to secure.
- Restore Power: Once installation is complete and all connections are secure, turn the power back on at the circuit breaker.
6. Operating Instructions
The Philips Meranti 3-Light LED Recessed Spot operates via a standard wall switch connected to its electrical circuit.
- Turning On/Off: Flip the wall switch to the 'ON' position to illuminate the spotlights. Flip it to the 'OFF' position to turn them off.
- Adjusting Spotlights: Each spotlight head can be individually adjusted to direct light to specific areas of your room. Gently pivot and rotate the spotlight heads to achieve the desired lighting angle.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your lighting fixture.
Cleaning
- Always turn off the power and allow the fixture to cool before cleaning.
- Wipe the fixture with a soft, dry, lint-free cloth.
- Do not use liquid or abrasive cleaners, as they may damage the finish.
Bulb Replacement
When a GU10 LED bulb needs replacement:
- Turn Off Power: Disconnect power to the fixture at the circuit breaker.
- Allow to Cool: Wait for the bulb to cool completely before touching it.
- Remove Old Bulb: Gently push the GU10 bulb into its socket and twist counter-clockwise to release it. Pull the bulb straight out.
- Insert New Bulb: Insert a new GU10 LED bulb (max 35W) into the socket. Align the pins, push gently, and twist clockwise to secure it.
- Restore Power: Turn the power back on at the circuit breaker.
Image 7.1: Illustration of replacing a GU10 bulb.
8. Troubleshooting
If you encounter issues with your Philips Meranti spot, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose wiring connection Faulty bulb | Check circuit breaker and wall switch. Ensure all wire connections are secure (with power off). Replace bulb with a new, working GU10 LED bulb. |
| Light flickers | Loose bulb Incompatible dimmer switch Faulty bulb | Ensure bulb is securely twisted into the socket. This fixture is not specified for dimming. If using a dimmer, ensure it is compatible with LED bulbs or remove it. Replace bulb. |
| Fixture gets too hot | Incorrect bulb wattage | Ensure bulbs do not exceed 35 Watts per spot. Use only GU10 LED bulbs. |
If the problem persists after trying these solutions, please contact Philips customer support.
9. Specifications
| Feature | Specification |
|---|---|
| Brand | PHILIPS |
| Manufacturer | Signify |
| Model Number | 8719514465336 |
| Product Dimensions (L x W x H) | 15.5 x 47.4 x 8 cm |
| Item Weight | 500 g |
| Number of Items | 1 |
| Style | Contemporary |
| Color | White |
| Material | Metal |
| Included Components | Spotlight fixture (bulbs not included) |
| Plug Type | With electrical power cord (for connection) |
| Batteries Required/Included | No |
| Power (Max per spot) | 35 Watts |
| Incandescent Equivalence | 35 Watts |
| Country of Origin | China |
10. Warranty and Support
For warranty information, please refer to the official Philips website or the documentation provided with your purchase. Philips products typically come with a manufacturer's warranty covering defects in materials and workmanship.
If you require technical assistance, have questions about installation, or need to report a defect, please contact Philips customer support through their official channels. You can usually find contact information on the Philips website or on the product packaging.
Online Support: Visit the official Philips website for FAQs, troubleshooting guides, and contact options.
Proof of Purchase: Keep your purchase receipt as proof of purchase for warranty claims.
