Orauley Facial Cleansing Brush User Manual

1. Important Safety Information

Please read this user manual carefully before using the product to ensure proper operation and safety.

• Tie back long hair to prevent it from getting caught in the device during use.
• Do not disassemble or attempt to repair the device yourself.
• Keep out of reach of children.
• If you experience any skin irritation, discontinue use immediately.

2. Product Overview

The Orauley Facial Cleansing Brush is designed for comprehensive facial cleansing, offering deep cleaning, exfoliation, and massage. It features a powerful rotary spin with two-speed settings and comes with four interchangeable brush heads to suit various skin needs.

Image: Orauley Facial Cleansing Brush with its charging stand and various brush heads.

Package Contents:

• 1 x Orauley Facial Cleansing Device
• 2 x Exfoliating Brush Heads
• 1 x Soft Cleansing Brush Head
• 1 x Silicone Brush Head
• 1 x USB Charging Cable
• 1 x Charging Stand (for storage, not charging)

Image: Detailed view of the Orauley brush heads, including exfoliating, soft, and silicone types.

3. Setup

3.1 Charging the Device

• Before first use, fully charge the device.
• Connect the USB charging cable to the charging port at the bottom of the device.
• Plug the other end of the USB cable into a 5V adapter (not included), computer, laptop, or power bank.
• The LCD battery display will show the charging progress. A full charge provides approximately 2 months of use (based on 2 minutes per day).

Image: The device highlighting its USB charging capability and LCD battery display.

3.2 Attaching Brush Heads

• Ensure the device is turned off.
• Align the desired brush head with the rotating shaft on the device.
• Press firmly until it clicks into place. To remove, gently pull the brush head off.

4. Operating Instructions

4.1 Basic Usage

1. Prepare Your Skin: Rinse your face with water and apply your preferred facial cleanser. Alternatively, apply cleanser directly onto the moistened brush bristles.
2. Select Brush Head: Choose the appropriate brush head for your skin type and desired cleansing effect (e.g., soft for daily cleansing, exfoliating for deeper cleaning).
3. Power On: Press the power button to turn on the device. The LCD display will show the battery level.
4. Adjust Speed: The device offers two speeds: Low (750r/min) for gentle cleansing and High (900r/min) for deep exfoliation. Press the power button repeatedly to cycle through the speeds.
5. Cleanse: Gently glide the brush over your skin in circular motions. Avoid pressing too hard, especially around delicate areas like the eyes.
6. Rinse: After cleansing, turn off the device. Rinse your face thoroughly with water and pat dry with a soft, clean towel.

Image: Step-by-step guide illustrating the facial cleansing process.

4.2 Speed Settings

• Low Speed (750r/min): Ideal for daily gentle cleansing and sensitive skin.
• High Speed (900r/min): Suitable for deep exfoliation and removing stubborn dirt, oil, and makeup residues.

Image: Visual representation of the device's two-speed settings and rechargeable battery.

4.3 Product Demonstration Video

5. Maintenance

5.1 Cleaning the Device and Brush Heads

• After each use, rinse the brush head thoroughly under running water.
• Clean the device body with a damp cloth. Do not use abrasive cleaners or harsh chemicals.
• The device is IPX7 waterproof, allowing for safe use in the shower or rinsing under running water. However, ensure the charging port cover is securely closed when exposed to water.

Image: The device showcasing its IPX7 waterproof capability, suitable for use in wet environments.

5.2 Brush Head Replacement

• For optimal performance and hygiene, it is recommended to replace brush heads every 3 months.
• Replacement brush heads can be purchased separately from authorized retailers.

6. Troubleshooting

• Device not turning on: Ensure the device is fully charged.
• Brush head not spinning: Check if the brush head is correctly attached and not obstructed.
• Reduced performance: Clean the brush head and device thoroughly. Consider replacing the brush head if it's old.
• For any other issues, please refer to the contact information in the Warranty and Support section.

7. Specifications

8. Warranty and Support

For warranty information or customer support, please contact Orauley directly through their official website or the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.