LIVAROCI Blood Pressure Monitor User Manual

1. Introduction

Thank you for choosing the LIVAROCI Blood Pressure Monitor. This automatic digital blood pressure machine is designed for accurate and convenient measurement of blood pressure and pulse rate at home. Equipped with a 2024 version smart chip and advanced AI algorithm, it provides reliable readings based on extensive clinical data. This manual provides essential information for the proper use, maintenance, and troubleshooting of your device.

2. Important Safety Information

Please read all instructions carefully before using this device. Keep this manual for future reference. Consult your physician for any health concerns or before making any medical decisions based on your readings. This device is intended for home use and should not replace professional medical advice or treatment.

• Do not self-diagnose or self-medicate based on the measurement results. Always consult a healthcare professional.
• Keep the device out of reach of children and pets.
• Do not use the device in a moving vehicle.
• Avoid taking measurements immediately after exercise, bathing, or consuming alcohol/caffeine.
• Ensure the cuff is properly positioned and fits snugly but comfortably.

3. Package Contents

Upon opening your LIVAROCI Blood Pressure Monitor package, please verify that all the following items are included:

• 1x LIVAROCI Blood Pressure Monitor Unit
• 1x Standard Size Cuff (9"-17" / 22-42cm)
• 1x Extra Large Cuff (13"-21" / 32-52cm)
• 1x Nylon Carry Bag
• 1x Type-C USB Cable
• 4x AAA Batteries
• 1x User Manual

Figure 3.1: All items included in the LIVAROCI Blood Pressure Monitor package.

4. Product Overview

The LIVAROCI Blood Pressure Monitor features a large LED color backlit screen for easy readability and simple one-button operation. It comes with two adjustable cuffs to accommodate a wide range of arm sizes, ensuring a comfortable and accurate measurement experience.

Figure 4.1: The LIVAROCI Blood Pressure Monitor and its accompanying cuffs.

4.1 Key Features

• Accurate Readings: Utilizes a 2024 version smart chip and advanced AI algorithm for precise measurements.
• Dual Cuff Sizes: Includes both M/L (9"-17") and X-large (13"-21") cuffs for versatile family use.
• Large LED Color Backlit Screen: Provides clear, large fonts and high-definition display for easy reading day or night.
• 3-Color Indicator: Features a color-coded indicator (Green/Orange/Red) to quickly assess blood pressure status (Normal/Mild Hypotension/High).
• Oversized Operation Button: Simple one-button start/stop for user-friendly operation.
• 2-User Mode with Memory: Stores 2 x 199 sets of readings, allowing two users to track their health over time.

Figure 4.2: Overview of the monitor's display and button functions.

Figure 4.3: The large LED color backlit screen for enhanced visibility.

Figure 4.4: The 3-color indicator for quick health status assessment.

Figure 4.5: The two adjustable blood pressure cuff sizes included.

5. Setup

5.1 Powering the Device

Your LIVAROCI Blood Pressure Monitor can be powered by either the included AAA batteries or via the Type-C USB cable.

• Battery Installation: Open the battery compartment on the back of the monitor. Insert the 4 AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.
• USB Power: Connect the provided Type-C USB cable to the monitor's Type-C port and the other end to a compatible USB power adapter (not included) or a computer USB port.

Figure 5.1: Two power options: AAA batteries and Type-C USB cable.

5.2 Connecting the Cuff

Select the appropriate cuff size for your arm. The standard cuff fits arm circumferences of 9-17 inches (22-42 cm), and the extra-large cuff fits 13-21 inches (32-52 cm). Connect the air tube from the cuff securely into the air connector hole on the side of the monitor. The updated air socket design ensures a more airtight connection for accurate inflation.

Figure 5.2: Securely connecting the cuff to the monitor.

6. Operating Instructions

6.1 Preparing for Measurement

1. Sit in a comfortable position with your back supported and feet flat on the floor.
2. Place your arm on a flat surface, such as a table, with your palm facing upwards.
3. Wrap the cuff around your upper arm, ensuring the bottom edge of the cuff is approximately 2-3 cm (about 1 inch) above your elbow joint. The red area on the cuff should be positioned over your main artery on the inside of your arm.
4. The cuff should fit snugly enough that you can barely slide two fingers under the top edge.
5. Remain still and quiet during the measurement.

6.2 Taking a Measurement

1. Press the large blue "START/STOP" button to begin the measurement.
2. The cuff will automatically inflate, and the monitor will display your systolic pressure (SYS), diastolic pressure (DIA), and pulse rate (PUL).
3. Once the measurement is complete, the cuff will deflate, and the results will be displayed on the screen. The 3-color indicator on the right side of the screen will light up (Green for Normal, Orange for Mild Hypotension, Red for High) to provide a quick visual assessment of your blood pressure level according to WHO guidelines.
4. Press the "START/STOP" button again to turn off the device, or it will automatically shut off after a period of inactivity to conserve battery.

6.3 Selecting User Mode

The device supports two users (User A and User B) with separate memory storage. To switch between users, press the "SET" button when the device is off or in standby mode. The user icon (A or B) on the screen will change. Ensure you select the correct user before taking a measurement to store readings in the appropriate memory bank.

7. Memory Functions

The LIVAROCI Blood Pressure Monitor can store up to 199 readings for each of the two users (total 398 readings). This allows for long-term tracking of blood pressure trends.

7.1 Accessing Stored Readings

1. With the device off or in standby mode, press the "MEM" button.
2. The screen will display the average of the last three readings.
3. Press the "MEM" button repeatedly to scroll through individual past readings, from the most recent to the oldest.

7.2 Clearing Memory

To clear all stored readings for the currently selected user:

1. While viewing the memory records, press and hold the "MEM" button for approximately 3-5 seconds until "CLr" (Clear) appears on the screen.
2. Release the button. The memory for that user will be cleared.

8. Maintenance

8.1 Cleaning the Device

• Wipe the monitor and cuff with a soft, dry cloth.
• If necessary, use a cloth lightly dampened with water or a mild detergent, then wipe dry immediately.
• Do not use abrasive cleaners, solvents, or immerse the device or cuff in water.

8.2 Storage

• Store the device and cuff in the provided nylon carry bag when not in use.
• Store in a cool, dry place, away from direct sunlight, extreme temperatures, and humidity.
• If the device will not be used for an extended period, remove the batteries to prevent leakage and damage.

9. Troubleshooting

If you encounter issues with your blood pressure monitor, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact LIVAROCI customer support for assistance.

10. Specifications

Figure 10.1: Product dimensions and side views.

11. Warranty and Support

LIVAROCI stands behind the quality of its products. For warranty information, technical support, or any questions regarding your blood pressure monitor, please refer to the contact information provided on the product packaging or visit the official LIVAROCI website. Please retain your purchase receipt as proof of purchase for warranty claims.