HeuGah T-5100 Faux Leather Counter Height Bar Stools

Introduction

Welcome to your new HeuGah T-5100 Faux Leather Counter Height Bar Stools. This manual provides essential information for the assembly, safe use, and proper maintenance of your product to ensure optimal performance and longevity. Please read these instructions thoroughly before assembly and use.

Important Safety Information

Adhering to these safety guidelines is crucial for preventing accidents and ensuring safe operation.

• Ensure the stool is used at an appropriate height and within the recommended maximum weight limit of 300 pounds (136 kg).
• Always follow assembly instructions carefully. Incorrect assembly can lead to instability and potential injury.
• Do not stand on the stools. They are designed for seating purposes only.
• Keep children and pets away from the assembly area to prevent access to small parts or tools.
• Periodically check all connections and fasteners to ensure they remain tight and secure.

Image: HeuGah T-5100 Bar Stools in a kitchen environment.

Package Contents

Before beginning assembly, please verify that all components listed below are present and undamaged.

• 4 x Seat Back/Cushion Assemblies (Brown Faux Leather)
• 4 x Metal Leg Frames (Black Powder-Coated Steel)
• 1 x Hardware Pack (Includes screws, washers, and Allen wrench)
• 1 x Instruction Manual

Assembly Instructions

Assembly is required for these bar stools. It is recommended to assemble on a soft, clean surface (e.g., a carpet or blanket) to prevent scratches to the product or your floor.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out. Compare them with the package contents list to ensure everything is accounted for.
2. Attach Seat to Frame: Align the pre-drilled holes on the underside of the seat cushion with the holes on the top of the metal leg frame.
3. Insert Screws: Insert the provided screws with washers into the aligned holes. Finger-tighten all screws initially.
4. Secure Connections: Once all screws are in place, use the included Allen wrench to gradually tighten them. Tighten screws evenly in a crisscross pattern to ensure a balanced and secure connection. Do not overtighten to avoid damaging the threads or materials.
5. Adjust Foot Pads: Place the assembled stool upright. The foot pads on the bottom of the legs can be adjusted by twisting them to compensate for uneven floor surfaces, ensuring the stool remains stable and level.

Image: Detailed view of bar stool components, highlighting the ergonomic backrest, comfortable cushion, adjustable feet, and sturdy footrest. These elements are integrated during assembly.

Usage Guidelines

These HeuGah bar stools are designed for comfortable seating at counter-height surfaces.

• Ergonomic Design: The seat and backrest are ergonomically designed to provide support and comfort during use.
• Footrest: Utilize the integrated footrest for enhanced comfort and to maintain proper posture while seated.
• Counter Height Compatibility: These 26-inch seat height stools are ideal for counters ranging from 34 to 40 inches high.

Image: Dimensional diagram illustrating the 26-inch seat height and its compatibility with counter heights between 34 and 40 inches. Also indicates a maximum weight capacity of 300 lbs.

Care and Maintenance

Proper care will help preserve the appearance and extend the lifespan of your bar stools.

• Cleaning Upholstery: The waterproof PU leather upholstery can be cleaned with a damp cloth. For tougher spots, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Frame Care: Wipe the metal frame with a soft, dry cloth. Avoid using abrasive materials that could scratch the finish.
• Fastener Checks: Periodically inspect all screws and connections. Re-tighten any loose fasteners to maintain the stool's stability and structural integrity.
• Environmental Factors: Avoid prolonged exposure to direct sunlight, excessive heat, or moisture, which can affect the material's durability and color.

Troubleshooting

If you encounter any issues with your bar stools, refer to the following common solutions.

Stool is unstable or wobbly:

• Ensure all assembly screws are securely tightened.
• Adjust the individual foot pads on the bottom of the legs. Twist them clockwise or counter-clockwise to level the stool on uneven flooring.

Difficulty with assembly:

• Review the assembly instructions carefully, paying close attention to the orientation of each part.
• Do not force components together. If parts do not fit, double-check that you have the correct parts and they are oriented correctly.
• If issues persist, contact HeuGah customer support for assistance.

Product Specifications

Warranty and Customer Support

HeuGah is dedicated to providing high-quality products and excellent after-sales service. If you have any questions, concerns, or require assistance with your T-5100 Bar Stools, please do not hesitate to contact our customer support team.

We strive to respond promptly and effectively address any issues you may encounter. Please refer to your purchase documentation or the HeuGah official website for specific warranty details and contact information.