Kiuluta Dog Bark Collar AT808 User Manual

1. Introduction

Thank you for choosing the Kiuluta Dog Bark Collar AT808. This device is designed to assist in training your dog to reduce excessive barking through humane and effective methods. It features automatic detection of barking and provides corrective stimuli including beep, vibration, and optional static shock. Please read this manual thoroughly before use to ensure proper operation and your dog's safety and comfort.

Image: The Kiuluta Dog Bark Collar AT808, emphasizing its role in humane and intelligent dog training.

2. Product Overview

2.1 Package Contents

The Kiuluta Dog Bark Collar AT808 package includes the following items:

• Bark Collar Unit
• Test Board
• USB Charging Cable
• Instruction Manual
• Silicone Protective Caps (two pairs)
• Electric Shock Terminals (two pairs)

Image: All components included in the Kiuluta Dog Bark Collar AT808 package.

2.2 Key Features

• Suitable for All Dog Sizes: Lightweight design with an adjustable strap for dogs from 6 to 150 lbs. The excess strap can be trimmed.
• 2 Humane Training Modes: Choose between Beep + Vibration mode (no shock) or Beep + Vibration + Shock mode.
• 4 Sensitivity Levels: Adjustable sensitivity to detect barking effectively.
• Rechargeable & IP67 Waterproof: USB rechargeable with up to 16 days standby battery life. IP67 waterproof rating allows use in rain, snow, and mud.
• No False Triggers: Equipped with smart sensors and chips to detect dog's throat vibration, preventing activation from other sounds or dogs.
• 6-Step Automatic Cycle: Progressive correction system that reminds the dog step-by-step. Includes a 2-minute protection mode after the sixth step.

Image: The collar's intelligent noise filtering system prevents false triggers from external sounds.

Image: The IP67 waterproof design allows the collar to be used in various weather conditions and during water activities.

3. Setup

3.1 Charging the Collar

1. Connect the provided USB charging cable to the charging port on the collar unit.
2. Plug the other end of the USB cable into a 5V power source (e.g., USB adapter, power bank, laptop, car charger).
3. The LED indicator on the collar will show charging status. A full charge typically takes approximately 2 hours and provides up to 16 days of standby time.

Image: The collar features a long-lasting battery and can be charged via any 5V USB device.

3.2 Fitting the Collar

1. Ensure the collar is turned off before fitting.
2. Place the collar around your dog's neck, positioning the device unit centrally under their chin.
3. Adjust the strap so it is snug but not too tight. You should be able to fit one or two fingers comfortably between the collar and your dog's neck.
4. The contact points (electrodes) on the collar unit must make direct contact with your dog's skin. For long-haired dogs, you may need to trim some fur or use longer contact points (if provided).
5. If the strap is too long, you can cut off the excess part. To prevent fraying, you may gently singe the cut edge with a lighter (exercise caution).

Image: The adjustable collar strap ensures a proper fit for dogs of all sizes, from small to large.

3.3 Attaching Silicone Protective Caps

To protect your dog's skin and ensure comfort, it is recommended to attach the silicone protective caps over the electric shock terminals. Choose the appropriate size for your dog.

Image: Detailed view of the collar unit, showing buttons, sensors, and contact points.

4. Operating Instructions

4.1 Power On/Off

• To Power On: Press and hold the Power/Sensitivity Set Button for 1.5 seconds. The LED indicator will light up.
• To Power Off: Press and hold the Power/Sensitivity Set Button for 1.5 seconds. The LED indicator will turn off.

4.2 Adjusting Sensitivity Levels

The collar has 4 sensitivity levels to detect barking. A higher sensitivity level means the collar will be triggered by softer barks.

1. With the collar powered on, short press the Power/Sensitivity Set Button to cycle through sensitivity levels.
2. The LED indicator will display different colors for each level:
• White: Level 1 (Lowest Sensitivity)
• Green: Level 2
• Yellow: Level 3
• Red: Level 4 (Highest Sensitivity)
3. Select the level that best suits your dog's barking volume and frequency.

4.3 Selecting Training Mode

The collar offers two training modes: No Shock Mode and Shock Mode.

1. With the collar powered on, short press the Mode Button to switch between modes.
2. The LED indicator will show the current mode:
• Green Light: No Shock Mode (Beep + Vibration only). Recommended for small dogs (5-15 lbs) or initial training.
• Red Light: Shock Mode (Beep + Vibration + Static Shock).

Image: Controls for adjusting sensitivity and selecting training modes.

5. Training Modes and Automatic Cycle

The Kiuluta Dog Bark Collar operates on a 6-step progressive automatic cycle to correct barking behavior.

5.1 No Shock Mode (Beep + Vibration)

In this mode, the collar will only use beep and vibration as corrective stimuli. This is ideal for sensitive dogs or as a starting point for training.

5.2 Shock Mode (Beep + Vibration + Static Shock)

In this mode, the collar will use beep, vibration, and static shock. The intensity of the vibration and shock increases with each progressive step of the cycle.

5.3 6-Step Automatic Cycle

When your dog barks, the collar initiates a progressive correction cycle:

1. Step 1: Beep (1.5 seconds)
2. Step 2: Beep (3 seconds) + Lightest Vibration (3 seconds)
3. Step 3: Beep (3 seconds) + Normal Vibration (3 seconds)
4. Step 4: Beep (3 seconds) + Stronger Vibration (3 seconds)
5. Step 5: Beep (3 seconds) + Strongest Vibration (3 seconds)
6. Step 6: Beep (3 seconds) + Strongest Vibration (3 seconds) + Static Shock (3 seconds, if in Shock Mode)

If your dog stops barking for 1 minute, the cycle resets to Step 1. If the dog continues barking through Step 6, the collar enters a 2-minute protection mode to prevent over-correction, during which it will not activate.

Image: The 6-step automatic cycle provides progressive correction to deter barking.

5.4 Official Product Video

6. Maintenance

• Cleaning: Hand wash the collar strap with a damp cloth. Avoid submerging the electronic unit in water for extended periods, despite its waterproof rating.
• Drying: Ensure the collar unit is completely dry before charging or storing.
• Charging Port: Be gentle when connecting and disconnecting the USB cable to the charging port to prevent damage. Ensure the charging port cover is securely closed when not charging to maintain water resistance.
• Contact Points: Regularly check the contact points for dirt or debris and clean them if necessary. Ensure they are free from corrosion.
• Skin Check: Periodically check your dog's neck for any signs of irritation or sores from the collar. If irritation occurs, discontinue use and consult a veterinarian.

7. Troubleshooting

8. Specifications

• Model Number: AT808
• Brand: Kiuluta
• Material: Nylon
• Color: Black
• Waterproof Rating: IP67
• Battery: 1 Lithium Ion battery (included)
• Battery Life (Standby): Approximately 16 days
• Charging Time: Approximately 2 hours
• Package Dimensions: 4.29 x 3.31 x 2.44 inches
• Item Weight: 6.7 ounces
• Breed Recommendation: All Breed Sizes (6-150 lbs)
• Manufacturer: Dongguan Dogreat Electronic Technology Co., Ltd
• UPC: 727238964910

9. Warranty and Support

For any questions, concerns, or technical support regarding your Kiuluta Dog Bark Collar AT808, please contact Kiuluta customer service. Refer to the product packaging or the official Kiuluta website for contact information.

Please note that specific warranty details may vary. Keep your purchase receipt as proof of purchase for any warranty claims.