Introduction
This manual provides comprehensive instructions for the assembly, use, and care of your Educa Harry Potter 3D Puzzle featuring Rubeus Hagrid. This 3D sculpture is designed for ages 6 and up, offering an engaging and creative building experience. Please read all instructions carefully before beginning assembly.
Safety Information
Warning! Not suitable for children under 3 years. Small parts. Choking hazard.
Always supervise young children during assembly to prevent accidental ingestion of small parts. Keep all packaging materials away from children to avoid suffocation risks. This product is made from cardboard and is not intended for consumption.
What's in the Box
Your Educa Harry Potter 3D Puzzle package should contain the following items:
- 37 pre-cut cardboard pieces for the Rubeus Hagrid 3D figure.
- 2 additional pieces that are part of an exclusive 12-piece Harry Potter puzzle collection.
- Instruction sheet (this document).
This image displays the front of the Educa Harry Potter 3D Puzzle box, featuring the completed Rubeus Hagrid figure alongside Harry Potter. The box highlights the 37 pieces and the 10.5 cm height of the finished sculpture.
Setup and Assembly
Follow these steps to assemble your Rubeus Hagrid 3D puzzle:
- Unpack Components: Carefully remove all cardboard pieces from the packaging. Lay them out on a clean, flat surface.
- Identify Pieces: The puzzle consists of layers of pre-cut, colored cardboard. Each piece is numbered or shaped to fit a specific sequence. Refer to the visual guide on the packaging or included instructions for the correct order.
- Stack Horizontally: Begin stacking the pieces horizontally, following the numerical or sequential order. The pieces are designed to interlock without the need for glue. Ensure each piece aligns perfectly with the previous one to form the 3D shape.
- Secure Connections: Gently press each piece into place to ensure a snug fit. Avoid forcing pieces, as this may damage the cardboard.
- Final Assembly: Continue stacking until all 37 pieces are assembled, forming the complete Rubeus Hagrid figure. The finished sculpture will be approximately 10.5 cm tall.
This image provides a side view of the Educa Harry Potter 3D Puzzle box, showcasing the 'Wizarding World' branding and further details about the Rubeus Hagrid 3D sculpture. It illustrates the packaging design.
Operating and Usage
Once assembled, your Rubeus Hagrid 3D puzzle is ready for display. This collectible figure is designed to be a decorative item. Additionally, remember to keep the two extra puzzle pieces included in the box. These pieces are part of an exclusive 12-piece Harry Potter puzzle. Collect all 6 characters in the series to complete the full 12-piece puzzle collection.
Maintenance
- Cleaning: To clean the figure, gently wipe it with a dry, soft cloth. Avoid using water or chemical cleaners, as they may damage the cardboard material.
- Storage: Store the assembled figure in a dry environment, away from direct sunlight and excessive humidity, to prevent warping or fading.
- Handling: Handle the figure with care to avoid bending or tearing the cardboard pieces.
Troubleshooting
- Pieces Not Fitting: Ensure you are attempting to connect the correct pieces in the proper sequence. Refer to the visual guide. Do not force pieces together.
- Figure Appears Uneven: Check that each layer is fully seated and aligned with the previous one. Gently press down on the assembled sections to ensure all connections are secure.
- Missing Pieces: If you believe a piece is missing, carefully check the packaging and surrounding area. If a piece is genuinely missing or damaged upon opening, please contact Educa customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Educa |
| Model Number | 19501 |
| Item Type Name | Rubeus Hagrid 3D Puzzle Figurine |
| Number of Pieces | 37 |
| Material Type | Cardboard |
| Material Type Free | PVC Free, Latex Free, Phthalate Free, BPA Free, Lead Free |
| Assembled Height | Approximately 10.5 cm (4.1 inches) |
| Recommended Age | 6 - 99 Years |
| Item Weight | 170 Grams |
| Item Dimensions (Box) | 5.35 x 5.35 x 1.85 inches |
| Educational Objective | Spatial Awareness |
| Skill Level | Intermediate |
Warranty
Educa products are manufactured to high-quality standards. While specific warranty details are not provided here, please retain your proof of purchase. If you encounter any manufacturing defects or issues with the product upon receipt, please contact the retailer or Educa customer service for assistance.
Support
For further assistance, questions, or to report missing/damaged parts, please contact Educa customer support through their official website or the retailer where the product was purchased. Please have your product model number (19501) and purchase details ready when contacting support.