DELAVIN Frameless Shower Door Instruction Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your DELAVIN 56"-60" W x 75" H Frameless Shower Door. Designed with 5/16" (8mm) clear SGCC tempered glass and an explosion-proof film, this double sliding shower door offers a spacious and secure showering experience. The stainless steel hardware in a gold finish ensures durability and a modern aesthetic. Please read this manual thoroughly before beginning installation to ensure proper setup and safe operation.

Important Safety Information

• Always wear safety glasses and gloves when handling glass panels.
• Tempered glass, while strong, can shatter if impacted at the edges. Handle with extreme care.
• Installation requires a minimum of two people due to the weight and size of the glass panels.
• Ensure all mounting surfaces are structurally sound and level before installation.
• Drilling into tile or masonry requires appropriate drill bits and techniques. If unsure, consult a professional.
• Verify that all rollers are securely tightened on the glass to prevent the glass door from falling.

Package Contents

Your DELAVIN shower door package includes all necessary components for assembly and installation. Please verify all parts against the packing list provided in the box and the visual guide below.

Image: All mounting parts and hardware included with the shower door.

• Shower Glass Panels (5/16" (8mm) clear SGCC tempered glass with explosion-proof film)
• Upper Guide Rail (widened and thickened aluminum alloy)
• Rollers (4 pcs Dia 2" (50mm) for smooth sliding)
• Handles (2 pcs 17-1/3" (440mm) length stainless steel rectangle handles)
• Guide Rail Brackets
• Anti-Splash Threshold (5/6" height)
• Anti-Water Seal Strips
• All necessary mounting screws and hardware

Specifications

Image: Detailed overall dimensions and specifications diagram.

Setup and Installation

Proper installation is crucial for the functionality and longevity of your shower door. Please follow these guidelines carefully. A professional installation video is provided below for visual assistance.

Pre-Installation Checklist

• Confirm wall surfaces are plumb and level. Uneven walls can lead to water leakage.
• Measure your shower opening accurately to ensure the correct door size.
• Gather all necessary tools, including a drill with appropriate bits for tile/masonry, a level, measuring tape, and silicone sealant.
• Ensure you have at least two people available for lifting and positioning the heavy glass panels.

Installation Steps

For a detailed visual guide, please refer to the official installation video below. This video demonstrates the process for model W213, which is applicable to your shower door.

1. Measure and Mark: Use the provided measuring stick or a tape measure to mark the precise locations for drilling holes for the guide rail brackets on your wall. Ensure vertical alignment.
2. Install Guide Rail Brackets: Detach the cover of the guide rail brackets. Place the bracket at the marked locations and drill holes. Secure the brackets to the wall using the provided 6*40 screws.
3. Insert Upper Guide Rail: Carefully insert the upper guide rail into the installed guide rail brackets.
4. Assemble Rollers on Glass: Attach the rollers to the pre-drilled holes on both glass panels. Ensure they are securely fastened.
5. Hang Glass Door Assembly: With assistance, carefully hang the glass door assembly onto the upper rail. Ensure the rollers are properly seated in the tracks.
6. Position Bottom Guide: Temporarily place the bottom guide block to determine its optimal position, ensuring the glass doors are centered on your shower curb. Mark the hole locations.
7. Fix Bottom Guide Block: Remove the glass doors. Drill holes at the marked locations for the bottom guide. Apply silicone sealant to any holes before inserting wall anchors. Fix the bottom guide block to the floor using the 4x25 screws.
8. Install Anti-Splash Threshold: Hold the anti-splash threshold against the shower floor, ensuring it is level. Fix the positioning blocks at both ends of the threshold using 4x25 screws.
9. Install Water Retaining Strips: Install the four water retaining strips on the door glass. Note that the strip with the water retaining edge is installed in the middle. The length and shape of these strips can be cut to fit your needs.
10. Assemble Door Handles: Attach the stainless steel handles to the designated holes on the glass panels.
11. Final Adjustments: Adjust the rollers and anti-jumping knobs to ensure smooth and quiet sliding. Install the roller covers and tighten all guide rail bracket covers.

Image: Detail of the smooth-gliding rollers and sturdy top rail.

Image: The anti-splash threshold and water seals ensure a dry bathroom floor.

Maintenance

Regular cleaning and maintenance will keep your DELAVIN shower door looking new and functioning optimally.

• Glass Cleaning: The clear tempered glass is easy to clean. Use a soft cloth and a non-abrasive glass cleaner or a mixture of white vinegar and water. Wipe down after each use to prevent water spots and soap scum buildup.
• Hardware Care: The stainless steel hardware is rust and corrosion-resistant. Clean with a soft, damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Seal Strips: Periodically check the anti-water seal strips for wear and tear. Replace if they become damaged to maintain a watertight enclosure.
• Roller Functionality: Ensure rollers remain free of debris and operate smoothly. Lubricate with a silicone-based lubricant if necessary.

Troubleshooting

Warranty and Support

For specific warranty information regarding your DELAVIN shower door, please refer to the documentation included with your purchase or contact DELAVIN customer support directly. Keep your proof of purchase for any warranty claims.

An official Installation Manual in PDF format is available for download: Installation Manual (PDF).