Pigeon Silicone Nipple (M) with Latch-On Line, 3rd Generation

1. Product Overview

The Pigeon Silicone Nipple (M) with Latch-On Line is designed to provide a natural feeding experience, facilitating a seamless transition between breast and bottle. This 3rd Generation nipple incorporates advanced features based on extensive research into infant sucking behavior, ensuring optimal latch and comfort for babies aged 3 months and older.

Image: Pigeon Silicone Nipple (M) with Latch-On Line, 3rd Generation (4-count pack).

2. Key Features

• Latch-On Line: A unique design feature that guides the baby to an appropriate and effective latch, promoting smooth feeding.

  Image: The Latch-On Line on the Pigeon Nipple, guiding proper baby latch.

• Anti-Colic System: Shaped to help minimize swallowed air during feeding, reducing the likelihood of gas and colic. Features an advanced venting system.

  Image: The Anti-Colic System with air vent hole to reduce air intake.

• Soft & Flexible Silicone: Made from 100% food-grade silicone rubber, BPA and BPS free. Its softness and flexibility mimic a mother's breast, aiding in seamless breast-to-bottle transitions and supporting natural tongue movement.

  Image: Nipple made from 100% silicone rubber, BPA free, heat-resistant, and food grade.

• Staged Flow: The 'M' nipple is designed for a medium flow rate, suitable for babies 3 months and older, aligning with their developmental stage.

  Image: Chart illustrating various nipple sizes (SS, S, M, L, LL) and corresponding age recommendations.

3. What's in the Box

• 4 x Pigeon Silicone Nipples (M)

4. Setup

1. Inspect: Before first use and after each cleaning, inspect the nipple for any tears, cracks, or damage. Discard immediately if any damage is found.
2. Clean: Thoroughly clean the nipple as per the 'Maintenance' section before initial use.
3. Assemble: Insert the nipple into the screw cap of your Pigeon bottle. Ensure the nipple is pulled through completely and securely seated to prevent leaks.
4. Attach: Screw the assembled nipple and cap onto the bottle.

5. Operating Instructions (Feeding)

The Pigeon Silicone Nipple is designed to support a baby's natural sucking motion, which involves three key steps: Latching On, Peristaltic Tongue Movement, and Swallowing.

Image: The three steps involved when a baby sucks: Latching On, Peristaltic Tongue Movement, and Swallowing.

Proper Latch Technique

• Position the nipple so that the baby's lips cover the wide base of the nipple, reaching the Latch-On Line. This ensures a deep and effective latch.

  Image: Baby feeding with a proper latch on the Pigeon nipple.

• The soft and flexible silicone allows for natural tongue movement, similar to breastfeeding, which helps in milk extraction and prevents nipple confusion.
• The anti-colic system's air vent helps regulate air pressure inside the bottle, reducing air intake and minimizing gas and discomfort for the baby.

Video: Research on Latch-On Line

Video: This video demonstrates Pigeon's research on the Latch-On Line feature, highlighting its importance for a good latch and smooth nursing experience.

6. Maintenance

Cleaning Instructions

• After Each Use: Disassemble all parts of the bottle and nipple. Wash immediately after each use to prevent milk residue from drying.
• Hand Washing: Wash the nipple thoroughly with warm water and mild dish soap. Use a soft brush or sponge to clean all surfaces, ensuring no milk residue remains, especially inside the nipple and around the vent. Rinse thoroughly.
• Dishwasher Safe: The nipple is dishwasher safe. Place it on the top rack of your dishwasher.

  Image: Demonstrating how to hand wash a baby bottle and nipple for thorough cleaning.

Sterilization

The silicone nipple can be sterilized using the following methods:

• Boiling: Place the nipple in boiling water for 5 minutes. Ensure it does not touch the sides of the pot to prevent damage.
• Steam Sterilizer: Follow the manufacturer's instructions for your steam sterilizer.
• Chemical Sterilization: Use a sterilizing solution according to the product instructions.

7. Troubleshooting

• Slow Flow: If the milk flow seems too slow for your baby, ensure the vent hole is clear and not clogged. Check if the nipple size 'M' is still appropriate for your baby's age and feeding development. Consider consulting a pediatrician or lactation consultant.
• Fast Flow / Choking: If the flow is too fast, causing your baby to choke or gulp, ensure the nipple is correctly assembled and not stretched. The 'M' size is medium flow; if your baby is struggling, they might need a slower flow nipple (e.g., 'S' or 'SS').
• Leaking: Ensure the nipple is securely pulled through the screw cap and the cap is tightly fastened to the bottle. Check for any damage to the nipple or bottle rim.
• Baby Not Latching: Ensure the Latch-On Line is used as a guide for proper positioning. The nipple's design is intended to mimic the breast; however, some babies may require time to adjust. Consult a lactation consultant if issues persist.

8. Specifications

9. Warranty and Support

For warranty information, product support, or to contact customer service, please refer to the official PIGEON website or the contact details provided on the product packaging. Keep your purchase receipt for any warranty claims.