Product Overview
The MIPEACE Bluetooth Earplug Headphones are designed to provide both hearing protection and audio entertainment in noisy environments. Featuring a comfortable neckband design and replaceable earbuds, these headphones offer excellent noise reduction and long battery life, making them ideal for various work and leisure activities.
Figure 1: MIPEACE Bluetooth Earplug Headphones and accessories.
What's in the Box
- MIPEACE Bluetooth Earplug Headphones (Neckband)
- Protective Case
- 2 x Extra Earbud Cables (replaceable)
- Replacement Ear Tips (various sizes)
- Charging Cable (USB-C)
- User Manual (this document)
Setup
1. Initial Charging
Before first use, fully charge the headphones. Connect the provided charging cable to the charging port on the neckband and plug the other end into a USB power source. The charging indicator light will show charging status. A full charge takes approximately 3 hours.
Figure 2: Charging the MIPEACE headphones.
2. Earbud Installation (if necessary)
The MIPEACE headphones feature replaceable earbud cables. To install or replace an earbud cable:
- Gently pull the existing earbud cable from the neckband connector to detach it.
- Align the new earbud cable's connector with the port on the neckband.
- Push firmly until it clicks into place, ensuring a secure connection.
Figure 3: Replacing earbud cables.
3. Pairing with a Bluetooth Device
The headphones use Bluetooth 5.4 for stable connections.
- Ensure the headphones are charged and powered off.
- Press and hold the power button on the neckband until the indicator light flashes, indicating pairing mode.
- On your device (phone, laptop, tablet), enable Bluetooth and search for available devices.
- Select "MIPEACE" from the list of found devices.
- Once connected, the indicator light will change, and you will hear an audio confirmation.
Figure 4: Advanced Bluetooth 5.4 connectivity.
Operating Instructions
Controls
The control buttons on the neckband allow for easy management of audio playback and calls.
- Power On/Off: Press and hold the power button.
- Play/Pause: Single press the multi-function button.
- Volume Up: Press the '+' button.
- Volume Down: Press the '-' button.
- Next Track: Press and hold the '+' button.
- Previous Track: Press and hold the '-' button.
- Answer/End Call: Single press the multi-function button during an incoming call.
- Reject Call: Press and hold the multi-function button during an incoming call.
Wearing the Headphones
Place the neckband comfortably around your neck. Insert the earplugs into your ear canals, ensuring a snug and secure fit for optimal noise reduction and sound quality. The patented oval silicone ear tips are designed for anatomical fit and comfort.
Figure 5: Comfortable and secure fit for all-day wear.
Figure 6: Lightweight and flexible neckband for extended use.
Maintenance
Cleaning
Regular cleaning helps maintain the performance and hygiene of your headphones.
- Wipe the neckband and earbud cables with a soft, damp cloth.
- Remove ear tips and clean them with mild soap and water. Ensure they are completely dry before reattaching.
- Do not use harsh chemicals or abrasive materials.
Storage
When not in use, store the headphones in the provided protective case to prevent damage and keep them clean.
Figure 7: Protective case for safe storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones do not power on. | Low battery. | Charge the headphones fully. |
| Cannot pair with device. | Headphones not in pairing mode; device Bluetooth off; too far from device. | Ensure headphones are in pairing mode (flashing light). Turn device Bluetooth off and on. Move headphones closer to device (within 10 meters). |
| No sound or poor sound quality. | Earbuds not properly connected; volume too low; ear tips not sealed. | Check earbud cable connections. Increase volume on headphones and device. Adjust ear tips for a secure seal. |
| Earbuds frequently detach. | Improper installation or worn connector. | Ensure earbud cables are firmly clicked into place. If worn, replace the earbud cable. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Earplug Work Headphones |
| Connectivity Technology | Wireless (Bluetooth 5.4) |
| Noise Reduction Rating (NRR) | 29 dB |
| Battery Life | Up to 19 hours (per charge) |
| Charging Time | Approximately 3 hours |
| Water Resistance Level | IPX5 (Sweatproof) |
| Bluetooth Range | 10 Meters |
| Item Weight | 25.8 Grams (0.91 ounces) |
| Material | Plastic, Silicone |
| Earpiece Shape | In Ear (Oval Ergonomic Design) |
| Special Features | Long Lasting Battery, Noise Reduction, Replaceable Earbuds, Sweatproof |
Official Product Video
Watch the official product video for a visual guide on features and usage.
Video: MIPEACE Bluetooth Earplug Headphones with Replacement Buds. This video demonstrates the key features, including replaceable earbuds, charging, Bluetooth connectivity, noise reduction, and ergonomic design, suitable for various work environments.
Warranty and Support
MIPEACE is committed to providing high-quality, comfortable, and long-lasting headphones. If you experience any issues with your MIPEACE Bluetooth Earplug Headphones, please reach out to our customer support team.
Our 24/7 support team is available to provide the quickest solutions to any headphone-related concerns.
For further assistance, please visit the official MIPEACE store on Amazon: MIPEACE Store
