Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Water Creation Elsa 20" Single Bathroom Vanity. Please read these instructions thoroughly before beginning installation or use to ensure safety and optimal performance.
Safety Information
Always follow local plumbing and building codes. Ensure all water connections are secure to prevent leaks. If you are unsure about any installation steps, consult a qualified professional. This product contains materials that may be subject to California's Proposition 65 warning.
Package Contents
- Vanity Base Cabinet (fully assembled)
- Integrated Ceramic Sink Countertop
- Faucet (Chrome finish)
- P-Trap
- Drain Assembly
- Hardware for installation
Note: Inspect all components for damage before installation. Do not proceed with installation if any parts are damaged or missing.
Setup and Installation
The Water Creation Elsa vanity is designed for freestanding installation and comes fully assembled for ease of setup. Basic plumbing connections will be required.
1. Unpacking and Inspection
Carefully remove the vanity from its packaging. Place it on a soft, protected surface to prevent scratches. Verify all components listed in the "Package Contents" section are present and undamaged.
2. Positioning the Vanity
Place the vanity in its desired location. Ensure the floor is level. The vanity features adjustable feet; use these to fine-tune leveling and stability.

Image: Water Creation Elsa 20" Single Bathroom Vanity positioned in a bathroom. The vanity is shown with its door closed, integrated sink, and faucet.
3. Faucet Installation
The integrated ceramic sink countertop has a pre-drilled standard single hole for faucet installation. Follow the faucet manufacturer's instructions for proper installation. Ensure all connections are tightened securely to prevent leaks.

Image: Close-up view of the integrated ceramic sink and the installed chrome faucet. The sink features an overflow drain.
4. Plumbing Connections
Connect the hot and cold water supply lines to the faucet. Connect the drain assembly and P-trap to the sink's drain opening and then to your household's waste pipe. The vanity base includes a plumbing cut-out for easy access. Ensure all connections are watertight. Test for leaks by running water through the faucet.

Image: Water Creation Elsa 20" Single Bathroom Vanity with the cabinet door open, showing the interior storage space and access for plumbing connections.
5. Door Adjustment (if necessary)
The vanity features European-style concealed hinges for soft-close doors. If the door requires adjustment for alignment, refer to the hinge manufacturer's instructions, typically involving small screws on the hinge body.

Image: Close-up view of the vanity cabinet door, highlighting the sleek brushed metal handle in a charcoal black finish.
Operating Instructions
The Water Creation Elsa vanity is designed for straightforward use in a bathroom environment.
- Faucet Operation: Use the single-handle faucet to control water flow and temperature.
- Cabinet Access: Open the soft-close cabinet door to access the storage space for toiletries and other bathroom essentials.
- Sink Usage: The integrated ceramic sink is designed for daily washing. The non-porous surface resists staining.
Maintenance and Care
Proper care will ensure the longevity and appearance of your vanity.
- Cleaning the Cabinet: Wipe the vanity base with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the cashmere gray finish.
- Cleaning the Sink: The integrated ceramic sink can be cleaned with mild soap and water. For stubborn stains, a non-abrasive bathroom cleaner can be used. Rinse thoroughly after cleaning.
- Faucet Care: Clean the chrome faucet with a soft cloth and mild soap or a non-abrasive chrome cleaner.
- Spills: Wipe up spills immediately to prevent water damage to the wood components.
- Adjustable Feet: Periodically check the adjustable feet to ensure the vanity remains level and stable.
Troubleshooting
This section addresses common issues you might encounter.
- Leaking Faucet or Drain:
- Check all plumbing connections for tightness.
- Ensure thread tape or plumber's putty was used correctly during installation.
- Inspect O-rings and washers for damage or improper seating.
- Slow Drainage:
- Check the P-trap for obstructions.
- Ensure the drain stopper is fully open.
- Cabinet Door Misalignment:
- Adjust the European-style concealed hinges. Small screws on the hinge allow for vertical, horizontal, and depth adjustments.
- Vanity Wobbles:
- Adjust the vanity's feet to ensure it is level and stable on the floor.
If problems persist, contact customer support.
Specifications
| Model Number | EA20CR01CG-000NH0101 |
| Brand | Water Creation |
| Dimensions (D x W x H) | 16"D x 20.5"W x 34"H |
| Weight | 55 lbs |
| Material | MDF (Door), Solid Wood (Base), Ceramic (Sink) |
| Finish | Cashmere Gray (Cabinet), White (Sink), Chrome (Faucet) |
| Installation Type | Freestanding |
| Number of Doors | 1 |
| Faucet Flow Rate | 1.2 GPM |
| Adjustable Feet | Yes (Maximum Height: 0.75") |
Warranty Information
This Water Creation Elsa 20" Single Bathroom Vanity is covered by a 1 Year Limited Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage and claims, please contact Water Creation customer service.
Customer Support
For technical assistance, missing parts, or warranty inquiries, please contact Water Creation customer support. Refer to the manufacturer's website or your purchase documentation for the most current contact information.