SEVERIN KA 4850 FILKA Coffee Maker Instruction Manual

1. Introduction

Thank you for choosing the SEVERIN KA 4850 FILKA Coffee Maker. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your appliance. Please read these instructions carefully before first use and keep them for future reference.

2. Safety Instructions

• Always connect the appliance to a properly installed and grounded power outlet.
• Do not immerse the appliance, power cord, or plug in water or other liquids.
• Keep the appliance out of reach of children.
• Unplug the appliance from the power outlet when not in use, before cleaning, and during assembly or disassembly.
• Do not operate the appliance if the power cord or plug is damaged, or if the appliance malfunctions or has been damaged in any way. Contact authorized service personnel.
• Use the appliance only for its intended purpose of brewing coffee.
• Avoid contact with hot surfaces. Use handles or knobs.
• Ensure the water tank is filled only with fresh, cold water.
• Never open the filter holder or water tank lid during the brewing cycle.

3. Product Overview

Familiarize yourself with the components of your SEVERIN KA 4850 FILKA coffee maker.

Figure 1: Front view of the SEVERIN KA 4850 FILKA Coffee Maker with glass carafe.

Figure 2: The coffee maker positioned on a kitchen counter, ready for use.

Figure 3: Detachable water tank being removed from the side of the coffee maker for easy filling and cleaning.

Figure 4: The transparent container for whole coffee beans, located at the top of the appliance.

Figure 5: Close-up of the digital control panel with various function buttons and a display showing time and settings.

Figure 6: The filter holder with a disposable paper filter and ground coffee inside.

Figure 7: The reusable gold-tone permanent filter placed in the filter holder, containing ground coffee.

Figure 8: The coffee maker displayed with its included accessories: glass carafe, gold-tone filter, and adjustable cup stand.

4. Setup

4.1 Unpacking and Initial Cleaning

1. Remove all packaging materials and stickers.
2. Clean the glass carafe, filter holder, and water tank with warm soapy water. Rinse thoroughly and dry.
3. Wipe the exterior of the appliance with a damp cloth.

4.2 First Use (Rinsing Cycle)

1. Fill the water tank with fresh, cold water up to the maximum level.
2. Place the empty glass carafe with its lid on the warming plate.
3. Insert the empty filter holder (without coffee or filter paper).
4. Plug the appliance into a power outlet.
5. Run a full brewing cycle without coffee to rinse the internal components. Discard the water.
6. Repeat this process once or twice to ensure thorough cleaning.

5. Operating Instructions

5.1 Filling the Water Tank

• Ensure the appliance is unplugged.
• Remove the detachable water tank (Figure 3).
• Fill the tank with the desired amount of fresh, cold water. The appliance features "Cup Control" which automatically draws the necessary water for your selected coffee quantity (100-350ml for single cups).
• Reinsert the water tank securely.

5.2 Adding Coffee Beans or Ground Coffee

• For Whole Beans: Open the lid of the bean container (Figure 4) and fill with whole coffee beans. Close the lid firmly.
• For Pre-Ground Coffee: Open the filter holder. Insert either a paper filter (Figure 6) or the reusable gold-tone filter (Figure 7). Add the desired amount of pre-ground coffee. Close the filter holder.

5.3 Brewing Coffee (Carafe)

1. Place the glass carafe with its lid on the warming plate.
2. Select the desired number of cups on the control panel (Figure 5).
3. Adjust coffee strength if available.
4. Press the start button to begin brewing. The appliance will grind the beans (if selected) and brew the coffee.

5.4 Brewing Coffee (Single Cup / To-Go Mug)

The 5-in-1 compatibility allows brewing directly into small cups, large cups, or to-go mugs.

1. Adjust the cup stand to the appropriate height for your chosen cup or mug (Figure 8).
2. Place your cup or mug on the stand.
3. Select the single-cup brewing option and desired volume (100-350ml) on the control panel.
4. Press the start button. The appliance will automatically dispense the correct amount of water and brew your coffee.

5.5 Programmable Features

Refer to the control panel (Figure 5) for setting the timer and other programmable functions. This allows you to set a specific time for your coffee to start brewing automatically.

6. Maintenance and Cleaning

6.1 Daily Cleaning

• Always unplug the appliance before cleaning.
• Wash the glass carafe, filter holder, and reusable gold-tone filter with warm soapy water after each use. These parts are often dishwasher-safe; refer to specific product markings.
• Wipe the exterior of the appliance with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
• Empty and clean the water tank regularly.

6.2 Cleaning the Bean Container and Grinder

• Ensure the bean container is empty.
• Carefully remove the bean container. Clean it with a dry brush or cloth.
• Use a small brush to clean any residual coffee grounds from the grinder mechanism. Do not use water directly on the grinder.

6.3 Descaling

Regular descaling is crucial for optimal performance and longevity of your coffee maker, especially in areas with hard water. The frequency depends on water hardness and usage.

1. Use a commercially available descaling solution suitable for coffee makers, or a mixture of white vinegar and water (1:2 ratio).
2. Fill the water tank with the descaling solution according to the manufacturer's instructions.
3. Place the empty carafe on the warming plate.
4. Run a brewing cycle. Stop the cycle halfway through and let the solution sit for about 15-30 minutes.
5. Resume and complete the brewing cycle.
6. After descaling, run at least two full cycles with fresh, clean water to rinse out any descaling residue.

7. Troubleshooting

8. Specifications

9. Warranty and Support

This SEVERIN appliance comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, spare parts, or service inquiries, please contact SEVERIN customer service or visit the official SEVERIN website.

Keep your purchase receipt as proof of purchase for warranty claims.