EMKE Water-Saving Shower Head with Hose and Filter

1. Introduction

Thank you for choosing the EMKE Water-Saving Shower Head. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new shower system. Please read these instructions carefully before use and retain them for future reference.

2. Safety Information

• Ensure all connections are tight to prevent leaks.
• Do not use abrasive cleaners or harsh chemicals on the shower head or hose, as this may damage the finish.
• Always check water temperature before showering to avoid scalding.
• This product is designed for domestic use with standard water pressure.

3. Package Contents

Verify that all components are present in the package:

• EMKE Shower Head
• 1.5m Stainless Steel Hose (with 1/2 inch connection)
• Adjustable Shower Head Holder
• 2 x Replacement Carbon Filters

The image displays the shower head with its dimensions (263mm length, 120mm head diameter) and the complete package contents: (1) EMKE Shower Head, (2) 1.5m Stainless Steel Hose with 1/2 inch connection, (3) Adjustable Wall Mount, and (4) Two Replacement Carbon Filters.

4. Setup and Installation

The EMKE shower head is designed for easy, tool-free installation with most standard shower hoses featuring a 1/2 inch connection. It is also compatible with instantaneous water heaters.

1. Prepare the Connection: Ensure your existing shower hose has a standard 1/2 inch connection.
2. Attach the Hose: Screw the 1.5m stainless steel hose onto your existing shower mixer outlet by hand. Ensure the rubber washer is correctly seated to prevent leaks.
3. Attach the Shower Head: Screw the EMKE shower head onto the other end of the hose by hand. Do not overtighten.
4. Install the Holder: Mount the adjustable shower head holder to your desired wall position. Typically, this involves drilling and screwing, or using adhesive if provided (check holder instructions).
5. Test for Leaks: Turn on the water supply and check all connections for any leaks. Tighten gently if necessary.

5. Operating Instructions

5.1. Adjusting Spray Modes

The EMKE shower head features 6 distinct spray modes, easily adjustable with a single button for convenient one-hand operation.

The EMKE shower head offers six distinct spray modes, easily adjustable with a single button. These modes include Rain, Boost, and Super-Boost, providing various water experiences from gentle rainfall to powerful high-pressure jets.

The EMKE shower head features a convenient one-button design for easy mode switching with a single hand, enhancing comfort and usability.

5.2. Water Filtration

The shower head is equipped with a multi-layer carbon filter cartridge. Water passes through these layers, which effectively remove impurities such as fluoride, chlorine, rust, sediment, and heavy metals, contributing to cleaner and healthier shower water.

This diagram illustrates the three-layer filtration system, including cotton fiber and activated carbon, designed to remove impurities, rust, sediment, heavy metals, chlorine, and odors from the water.

6. Maintenance

6.1. Cleaning the Shower Head

The 12cm large shower head features silicone nozzles that are easy to clean. Simply wipe the nozzles with a cloth or your finger to remove any limescale buildup and ensure consistent water flow.

The 12cm large shower head features silicone nozzles that are easy to clean, preventing limescale buildup and ensuring consistent water flow.

6.2. Filter Replacement

For optimal water filtration performance, the carbon filter cartridge should be replaced periodically. The frequency of replacement depends on your water quality and usage. Refer to the filter packaging for specific replacement guidelines. Two replacement filters are included in your package.

The multi-stage filter system effectively removes chlorine and impurities, purifying the water and potentially improving skin condition. Regular filter replacement is recommended for continuous performance.

7. Troubleshooting

• Low Water Pressure: Check if the filter cartridge is clogged and needs replacement. Ensure the hose is not kinked. Clean the shower head nozzles.
• Leaks from Connections: Ensure all connections are tightened properly by hand. Check if rubber washers are correctly seated and not damaged.
• Difficulty Changing Spray Modes: Ensure the mode selection button is clean and free from debris.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the retailer's policy or contact EMKE customer service through their official channels. Keep your purchase receipt as proof of purchase.