ML-Design Tipi Children's Bed 90x200 cm Natural with Cold Foam Mattress (H: 10 cm) Instruction Manual

1. Introduction

Thank you for choosing the ML-Design Tipi Children's Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new children's bed. Please read these instructions carefully before use and retain them for future reference.

The ML-Design Tipi Children's Bed is designed to provide a comfortable and imaginative sleeping environment for children. It features a sturdy natural pine wood construction, a slatted frame, and integrated fall protection. This model includes a 10 cm high cold foam mattress for optimal comfort.

2. Safety Information

WARNING:

• This product contains small parts that can cause choking in children under 3 years of age. Keep out of reach of children during assembly.
• Do not use the bed without the fall protection and the slatted frame properly installed.
• Observe the maximum recommended weight capacity of approximately 120 kg to avoid damage to the bed and personal injury.
• Ensure all screws and fasteners are securely tightened before use and check periodically.
• Place the bed on a flat, stable surface.
• Keep children away from the assembly area until the bed is fully assembled.

3. Package Contents

Please check that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• 1x Tipi Children's Bed frame with integrated fall protection
• 1x Slatted frame (consisting of 13 veneer wood slats)
• 1x Cold foam mattress (approx. 200 x 90 x 10 cm)
• Assembly instructions
• Required assembly hardware (screws, dowels, etc.)

4. Setup and Assembly

Assembly is designed to be straightforward. It is recommended to assemble the bed with two adults. Please follow the included assembly instructions step-by-step. Below are general guidelines and key points.

1. Unpack Components: Carefully unpack all parts and lay them out on a clean, soft surface to prevent scratches. Verify all parts against the package contents list.
2. Assemble Bed Frame: Begin by connecting the main frame components. Ensure all joints are aligned correctly before tightening screws. The bed frame is made of solid pine wood.
3. Install Fall Protection: Attach the side rails (fall protection) to the bed frame. These are crucial for child safety.
4. Insert Slatted Frame: Place the 13-slat veneer wood slatted frame into the designated supports within the bed frame. Ensure it sits securely and evenly.
5. Assemble Tipi Structure: Attach the upper tipi-style frame elements. These form the decorative roof structure.
6. Place Mattress: Once the bed frame and slatted frame are fully assembled and secure, place the cold foam mattress (200 x 90 x 10 cm) onto the slatted frame.
7. Final Check: Before first use, double-check all screws and connections to ensure they are tight and secure.

Image 1: Detailed dimensions and structural overview of the Tipi Children's Bed.

Image 2: Highlighting the solid pine wood material and ease of assembly.

5. Operating (Usage)

The ML-Design Tipi Children's Bed is designed for children aged 3 to 10 years. Its ground-level access makes it easy for children to get in and out independently.

• Sleeping Comfort: The included cold foam mattress is hypoallergenic, breathable, and provides excellent climate control, adapting to body temperature for comfort in both warm and cool conditions.
• Safety Features: The integrated fall protection rails prevent accidental falls during sleep. Always ensure these rails are securely in place.
• Creative Space: The unique tipi design allows for creative decoration, such as hanging fairy lights, pennants, or a canopy, to personalize the sleeping area.

Image 3: Overview of the bed's key features including mattress, slatted frame, and fall protection.

Image 4: Demonstrating the ideal lying comfort provided by the cold foam mattress.

6. Maintenance

Proper maintenance will ensure the longevity and hygiene of your ML-Design Tipi Children's Bed.

• Bed Frame: Wipe the natural pine wood frame with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the wood finish. Dry immediately with a clean cloth.
• Mattress Cover: The mattress cover is 100% polyester and removable. It can be washed according to the care label (typically machine washable at 30°C). Ensure the cover is completely dry before putting it back on the mattress.
• Mattress Care: The cold foam mattress is hypoallergenic and breathable. Regularly air out the mattress to maintain freshness and prevent moisture buildup.
• Hardware Check: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.

Image 5: Features of the cold foam mattress, including its washable cover and Oeko-Tex certification.

Image 6: Details on the durable and washable materials of the mattress.

7. Troubleshooting

This section addresses common issues you might encounter with your children's bed.

If you encounter issues not listed here or require further assistance, please contact ML DESIGN modern living customer support.

8. Specifications

9. Warranty and Support

Specific warranty information is not provided in the product details. Please refer to your purchase documentation or contact the retailer for warranty terms and conditions.

For technical support, missing parts, or any questions regarding your ML-Design Tipi Children's Bed, please contact ML DESIGN modern living customer service or the seller from whom you purchased the product. Please have your model number (ML-218+ML-660) and purchase details ready.