Selore 15-in-1 USB C Docking Station User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Selore 15-in-1 USB C Docking Station. This versatile docking station is designed to expand the connectivity of your USB-C enabled laptop, offering multiple display outputs, high-speed data transfer ports, network connectivity, and power delivery capabilities.

Product Overview

The Selore 15-in-1 USB C Docking Station (Model SEDK1401) is a comprehensive solution for expanding your laptop's capabilities. It features a robust set of ports to connect various peripherals and external displays.

Figure 1: Selore 15-in-1 USB C Docking Station and included cables.

Key Features:

• Ultra HD Display Output: Supports single 8K@30Hz or triple 4K@30Hz displays (when source is DP1.4).
• Extensive Port Selection: Includes 2x HDMI, 1x DisplayPort, 2x USB 3.1 Type-C, 1x USB 3.1 Type-A, 2x USB 3.0, 1x USB 2.0, Gigabit Ethernet, 3.5mm Audio/Mic Jack, Micro SD/SD Card Reader, and a security slot.
• High-Speed Data Transfer: USB 3.1 ports offer up to 10Gbps data transfer speeds.
• Power Delivery: Supports up to 100W input and 87W (safe) output power delivery to your laptop.
• Gigabit Ethernet: Provides stable and fast wired network connection up to 1000Mbps.

Figure 2: Front and rear view of the docking station highlighting all available ports.

Setup Instructions

Follow these steps to set up your Selore docking station:

1. Connect Power (Optional but Recommended): If your laptop requires charging via the docking station, connect a USB-C power adapter (not included) to the PD (Power Delivery) port on the docking station. The docking station supports up to 100W input and 87W output.
2. Connect to Laptop: Use the provided USB-C cable to connect the "HOST" port on the docking station to a compatible USB-C or Thunderbolt 3 port on your laptop.
3. Connect Displays:
   • For single 8K display: Connect one monitor to either an HDMI or DisplayPort on the docking station. Ensure your monitor and laptop support 8K resolution and DP 1.4 protocol.
   • For triple 4K displays: Connect up to three monitors using the available HDMI and DisplayPort outputs.
4. Connect Peripherals: Connect your USB devices (mouse, keyboard, external hard drives, etc.) to the USB 3.1 Type-C, USB 3.1 Type-A, USB 3.0, and USB 2.0 ports.
5. Connect Network: For a stable wired internet connection, connect an Ethernet cable from your router/modem to the Gigabit Ethernet port on the docking station.
6. Connect Audio: If desired, connect headphones or speakers to the 3.5mm Audio/Mic 2-in-1 port.
7. Insert Memory Cards: Insert Micro SD or SD cards into the respective slots for data transfer.

Figure 3: Connecting power and Ethernet to the docking station.

Operating Instructions

Display Configuration:

The docking station supports various display configurations depending on your operating system and laptop's capabilities.

Single 8K or Triple 4K Display:

The docking station can output a single 8K display at 30Hz or 4K at 120Hz (when the source is DP1.4). For triple display setups, it supports up to 4K resolution on each monitor.

Figure 4: Single 8K display setup. Ensure your host device and monitor support 8K/4K display and DP 1.4 protocol.

Windows Operating System (DP1.4):

For Windows systems, the docking station supports Extend Mode (Laptop A + B + C + D) allowing for different content on each display. It also supports Mirror Mode.

Figure 5: Windows Extend Mode with multiple displays.

macOS Operating System:

Due to limitations of the macOS system, it primarily supports Mirror Mode (MacBook A + A + A + A), where all external monitors display the same content as the MacBook. Extend Mode (MacBook A + B + B + B) is also supported, but the extended monitors will show the same image. macOS does not support Multi-Stream Transport (MST) for independent extended displays.

Figure 6: macOS display modes (Mirror and Extend with shared content).

Data Transfer and Network:

Utilize the high-speed USB ports for quick data transfers and the Ethernet port for reliable network connectivity.

• USB 3.1 Ports: Transfer large files rapidly. For example, 20GB of files can be transferred in approximately 25 seconds using a USB 3.1 port.
• Gigabit Ethernet: Enjoy stable and fast internet speeds up to 1000Mbps, ideal for streaming, gaming, and large downloads.

Figure 7: High-speed data transfer via USB 3.1 ports.

Figure 8: Gigabit Ethernet and 100W Power Delivery capabilities.

Compatibility

The Selore 15-in-1 USB C Docking Station is designed to work with a wide range of USB-C and Thunderbolt 3 compatible devices. For video output (HDMI/DisplayPort) functionality, your host device must support video output or DisplayPort Alternate Mode (DP Alt Mode).

Compatible Devices (Examples):

• MacBook/MacBook Pro (2018, 2019, 2020 models and newer)
• MacBook Air (2018, 2020 models and newer)
• iPad Pro 2018
• Dell XPS 13/15
• Lenovo Thinkpad Yoga
• Samsung Galaxy S9/S9+
• Other devices with full-featured USB-C ports supporting DP Alt Mode.

Incompatible Devices (Examples):

• HP Pavilion series
• HP EliteBook series
• Lenovo IdeaPad series
• Any laptop whose USB-C port does not support video output (DP Alt Mode).

Note: Always verify your laptop's USB-C port capabilities before purchasing to ensure full compatibility with display output features.

Maintenance

To ensure the longevity and optimal performance of your Selore docking station, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the exterior of the docking station. Avoid using liquid cleaners or aerosols, as they may damage the device.
• Storage: Store the docking station in a cool, dry place away from direct sunlight and extreme temperatures.
• Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts.
• Ventilation: Ensure proper ventilation around the docking station to prevent overheating, especially during prolonged use with multiple connected devices.
• Cable Management: Avoid bending or crimping the connected cables excessively, as this can lead to damage over time.

Troubleshooting

If you encounter issues with your docking station, refer to the following common problems and solutions:

Specifications

Warranty and Support

Selore&S-Global provides 24-months product support after purchase. For any technical assistance, troubleshooting, or warranty claims, please contact our customer service team. Our professional technical team is available to provide solutions and support.

For further assistance, please visit the official Selore&S-Global store or contact customer service through your purchase platform.

Link to Brand Store: Selore&S-Global Store