1. Introduction
Thank you for choosing the TokeShimi 28x36 LED Bathroom Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: TokeShimi 28x36 LED Bathroom Mirror in a modern bathroom setting.
2. Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- Handle with care to avoid breakage. The mirror is equipped with shatterproof film, but excessive force can still cause damage.
- Mount the mirror using the provided French Cleat for secure installation. Ensure the mounting surface is structurally sound.
- In case of breakage, clean up shattered glass immediately and dispose of it safely. Do not use the mirror if it is cracked or damaged.
- All electrical connections should be performed by a qualified electrician if hardwiring is chosen. Ensure power is disconnected at the circuit breaker before installation.
- Do not attempt to modify or repair the mirror's electrical components. Contact customer support for assistance.
- Keep the mirror away from direct water spray to prevent electrical hazards.
3. Package Contents
Verify that all components are present and undamaged upon opening the package:
- TokeShimi 28x36 LED Bathroom Mirror (1 unit)
- French Cleat Mounting Hardware (1 set)
- Screws and Wall Anchors (for mounting)
- Installation Instructions (this manual)
Image 3.1: Illustration of the protective packaging layers ensuring safe delivery.
4. Specifications
| Feature | Specification |
|---|---|
| Brand | TokeShimi |
| Model | 28x36 |
| Product Dimensions | 36"L x 28"W |
| Frame Material | Frameless |
| Mounting Type | Wall Mount (French Cleat) |
| Light Source | LED (Frontlit & Backlit, 192 LEDs/m, CRI90+) |
| Color Temperature | 3000K (Warm), 4500K (Neutral), 6000K (Cool) |
| Dimming | Stepless (5% to 100%) |
| Special Features | Anti-Fog, Memory Function, Shatterproof Film, Independent Light Control |
| Certifications | UL Listed (Anti-Fog film, LED Driver) |
| Material | Copper-free Mirror |
| Item Weight | 29.2 pounds (13.29 Kilograms) |
5. Setup and Installation
The TokeShimi LED Bathroom Mirror is designed for easy installation using a French Cleat system. It can be powered via a standard plug-in or hardwired connection.
5.1 Pre-Installation Checklist
- Ensure the wall can support the mirror's weight (approximately 29.2 lbs).
- Confirm the desired mounting location has access to a power outlet or suitable wiring.
- Gather necessary tools: drill, level, measuring tape, screwdriver, pencil.
- Disconnect power at the circuit breaker if hardwiring.
5.2 Mounting Instructions (French Cleat)
- Measure and Mark: Determine the desired height and center position for the mirror. Mark the location for the French Cleat on the wall.
- Drill and Install Wall Anchors: Drill pilot holes at the marked positions. Insert the appropriate wall anchors (provided) into the holes.
- Screw Brackets to Wall: Secure the French Cleat bracket to the wall using the screws provided, ensuring it is level.
- Secure the Mirror: Carefully lift the mirror and align the mirror's cleat with the wall-mounted cleat. Lower the mirror until it is securely seated.
Image 5.1: Visual guide for the 3-step installation process.
5.3 Power Connection Options
The mirror offers two methods for power connection:
- Option 1: Plug-in: The mirror comes with a standard power plug. Simply plug it into a compatible wall outlet.
- Option 2: Hardwired: For a seamless look, the mirror can be hardwired directly into your electrical system. This requires professional installation by a qualified electrician. Ensure the power is off at the circuit breaker before beginning.
Image 5.2: Rear view of the mirror illustrating the French Cleat hanger, fixed wire design, and both plug-in and hardwired connection options.
Image 5.3: The mirror can be installed in either a vertical or horizontal orientation to suit your space.
6. Operating Instructions
Your TokeShimi LED Bathroom Mirror features intuitive touch controls for various lighting functions.
6.1 Power On/Off and Light Control
The mirror has independent controls for frontlit and backlit illumination.
- Frontlit: Touch the designated frontlit icon to turn on/off the front lighting.
- Backlit: Touch the designated backlit icon to turn on/off the backlighting.
- Combined: Activate both frontlit and backlit modes for optimal illumination.
Image 6.1: The mirror features both frontlit and backlit LED strips for versatile lighting.
Image 6.2: The mirror offers three distinct lighting modes: frontlit for makeup, backlit for ambiance, and a combination for optimal illumination.
6.2 Brightness Adjustment (Stepless Dimming)
To adjust the brightness:
- Press and hold the power/brightness touch button. The brightness will cycle from 5% to 100%. Release the button at your desired brightness level.
6.3 Color Temperature Selection
To change the light color temperature:
- Tap the color temperature touch button. The mirror will cycle through 3000K (Warm), 4500K (Neutral), and 6000K (Cool) settings.
Image 6.3: The mirror provides triple color temperatures and stepless dimming from 5% to 100%.
6.4 Anti-Fog Function
The mirror features an upgraded UL listed Anti-Fog film.
- Activate: Tap the anti-fog touch button to turn on the defogger.
- Auto-off: The defogger will automatically turn off after 1 hour to prevent overheating and save energy.
Image 6.4: Activate the fast defogging function with a single touch. The defogger automatically turns off after 1 hour.
6.5 Memory Function
The mirror's memory function retains your last light setting (brightness and color temperature) when powered off and on.
Image 6.5: The mirror remembers your last light setting for convenience.
7. Maintenance
Proper care will ensure the longevity and performance of your TokeShimi LED Bathroom Mirror.
- Cleaning: Use a soft, damp cloth with a mild glass cleaner to wipe the mirror surface. Avoid abrasive cleaners or harsh chemicals that could damage the mirror or LED strips.
- Electrical Components: Do not spray water directly onto the mirror's electrical components. Ensure the mirror is dry before operating.
- Inspection: Periodically check the mounting hardware for tightness and the power cord for any signs of wear or damage.
8. Troubleshooting
If you encounter issues with your mirror, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror lights do not turn on. | No power supply; loose connection; faulty LED driver. | Check power outlet/circuit breaker. Ensure all connections are secure. If hardwired, consult an electrician. Contact support if the issue persists. |
| Anti-fog function is not working. | Anti-fog function not activated; power issue. | Ensure the anti-fog button has been pressed. Verify the mirror has power. Note that it may take a few minutes to warm up. |
| Lights are flickering or dim. | Unstable power supply; faulty LED strip/driver. | Check power connection. Try adjusting brightness. If flickering continues, contact customer support. |
| Touch buttons are unresponsive. | Temporary software glitch; moisture on buttons. | Ensure buttons are dry. Try disconnecting power for 30 seconds and reconnecting. |
9. Warranty and Support
TokeShimi is committed to providing high-quality products and customer service.
9.1 Warranty Information
Your TokeShimi LED Bathroom Mirror comes with a 2-year free replacement warranty for product failures. This warranty covers manufacturing defects and functional issues under normal use.
9.2 Customer Support
For any questions, concerns, or warranty claims, please contact TokeShimi customer service. Our team is available to assist you.
- For broken/wrong mirror replacement: Contact us directly with a photo of the mirror. We will arrange a free replacement.
- General inquiries: Please visit the product page on Amazon and click on the 'TokeShimi' store link, then select 'Ask a question' to send us a message.
Image 9.1: Steps to contact TokeShimi customer support through the Amazon platform.