Product Overview
This instruction manual provides essential information for the safe and effective use of your YBQZJSLY Replacement Charger Power Adapter. This adapter is designed for specific Shark Pet Cordless Stick Vacuum models.
Compatible Models: Shark Pet Cordless Stick Vacuum IX141, IX144AMZ, IZ163H, IZ362H, IZ363HT, IZ140.
Please verify your vacuum's model number matches the compatible models listed above to ensure proper functionality and safety.
Image: The YBQZJSLY Replacement Shark Charger Power Adapter, showing its compact design and the barrel connector.
Safety Warnings
- Do not use this product in high temperature, humid, or near water environments.
- Do not disassemble or modify the power adapter.
- If the power adapter is damaged, cease using it immediately and contact after-sales service.
- The power adapter output is DC; please note that the voltage must be consistent with the electronic devices.
- The output current of the power adapter is the same as the rated current of the electrical equipment.
Setup and Connection
- Connect the Power Supply: Plug the power adapter into a standard 100-240V 50-60Hz AC power outlet. Ensure the outlet voltage matches the adapter input voltage.
- Connect to the Device: Plug the device's charging cable (barrel connector) into your Shark Pet Cordless Stick Vacuum's charging port.
Image: The charger with its cable, highlighting the nickel-plated metal plug for anti-oxidation and copper wire for high-speed power transmission.
Operating Instructions
Charging Status Indication:
- The charger typically has an indicator light. A red light usually indicates that the device is charging.
- A green light typically indicates that the device is fully charged.
- Refer to your Shark vacuum's user manual for specific charging indicator behaviors.
After the device starts charging, the adapter may heat up slightly, which is normal. If the adapter overheats or makes unusual sounds, disconnect the power supply immediately.
Video: A demonstration of the 24.8V 0.8A Shark Rocket Pro Cordless Vacuum Charger in use, showing the charging process and indicator lights.
Video: A short clip demonstrating the 24.8V Charger for Shark Cordless Vacuum, highlighting its connection and charging status.
Maintenance
- Keep the charger clean and free from dust and debris.
- Store the charger in a cool, dry place when not in use.
- Avoid bending or crimping the cable excessively to prevent internal damage.
- Regularly inspect the cable and connector for any signs of wear or damage.
Troubleshooting
Charger Not Working:
- Ensure the power adapter is securely plugged into a working wall outlet.
- Verify that the charging cable is firmly connected to your Shark vacuum.
- Check for any visible damage to the cable or adapter. If damaged, discontinue use.
- Confirm that your Shark vacuum model is compatible with this charger.
Slow Charging:
- Ensure the power outlet is providing adequate power (100-240V).
- Avoid using extension cords if possible, as they can sometimes reduce charging efficiency.
- Ensure the vacuum's battery is not excessively drained.
Specifications
| Feature | Detail |
|---|---|
| Model Number | GQ12-120100-CU |
| AC Input | 100-240V 50-60Hz |
| Output | 24.8V 0.8A |
| Cable Length | 5.9FT / 1.8M |
| Connector Type | Barrel Connector |
| Special Features | Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection |
| Item Weight | 3.84 ounces |
| Color | Black |
Image: A close-up view of the charger's label, detailing its input and output specifications.
Warranty and Support
For any questions or concerns regarding your YBQZJSLY Replacement Shark Charger Power Adapter, please contact our customer support. We are committed to providing reliable products and assistance.
Please refer to your purchase documentation for specific warranty details and contact information.