Garrett PD 6500i Enhanced Pinpoint Walk-Through Metal Detector User Manual

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Garrett PD 6500i Enhanced Pinpoint Walk-Through Metal Detector. The PD 6500i is a sophisticated security solution designed for accurate and efficient detection of metal objects in high-traffic environments such as airports, courthouses, schools, and correctional facilities. It utilizes advanced broadband technology for superior ferrous and non-ferrous detection, aiming to reduce false alarms and improve throughput.

Key Features

• Innovative Bilateral Technology: Transmitters and receivers in each side panel ensure uniform detection throughout the archway, analyzing targets across a broad range of frequencies for greater accuracy.
• Superior Noise Cancellation: Designed to minimize interference from nearby electronic equipment, simplifying setup and placement.
• Independent Zone Indicator Lights: Both detector panels feature lights that identify the height and location (left, center, right) of detected objects.
• ADA-Compliant Passageway: The archway's inside width meets ADA compliance standards.
• Advanced Networking Capabilities: Allows for individual or group management and statistical analysis via a network with an optional CMA interface module.
• Directional Counter: Features four settings for accurate patron counting: forward only, reverse only, subtract in reverse, and bidirectional.
• Quick Startup: Powers on in less than 5 seconds.
• Tamper-Proof, Water-Proof, and Weather-Proof: Designed for enhanced durability and reliability.

Setup

Careful setup is crucial for optimal performance. Ensure the installation area is level and free from excessive electromagnetic interference. Refer to the detailed assembly instructions provided in the packaging for step-by-step guidance.

1. Unpacking: Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present.
2. Assembly: Assemble the side panels and overhead crossbar according to the diagrams. Ensure all connections are secure.
3. Placement: Position the assembled unit in the desired location, ensuring adequate space around it for traffic flow and maintenance. The unit should be placed on a stable, level surface.
4. Power Connection: Connect the power cable to the unit and then to a grounded electrical outlet. The unit operates on AC power.
5. Initial Power On: Once assembled and connected to power, the unit will perform a self-test and be ready for configuration.

Figure 1: The Garrett PD 6500i Enhanced Pinpoint Walk-Through Metal Detector, showing its archway design and control panel.

Operating Instructions

Power On and Self-Test

Upon connecting to power, the PD 6500i will automatically initiate a self-test sequence. This process typically completes in under 5 seconds. Once complete, the unit will display its operational status.

Traffic Control

The detector features universal "wait" and "proceed" symbols at the entrance to guide individuals through the archway. These lights illuminate to indicate when it is safe to pass.

• "Wait" Symbol: Indicates that the archway is currently in use or processing a detection.
• "Proceed" Symbol: Indicates that the archway is clear for the next individual to pass through.

Zone Indicators

Independent zone indicator lights on both side panels provide precise location information for detected metal objects. These lights help identify not only the height but also the left, center, and right positions of objects within the archway.

Menu-Based Settings

The PD 6500i features a user-friendly menu system for configuring various operational parameters. Access the menu via the control panel to adjust settings such as:

• Alarm Indication: Adjust sensitivity levels and alarm types.
• Count Method: Configure the directional counter settings (forward only, reverse only, subtract in reverse, bidirectional).
• Language: Select the desired operating language.
• System Upgrades: The field programmable feature allows for future system enhancements.

Refer to the control panel section of the full manual for detailed instructions on navigating and adjusting these settings.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your metal detector.

• Cleaning: Use a soft, damp cloth to wipe down the exterior surfaces. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
• Inspection: Periodically inspect all cables and connections for signs of wear or damage. Ensure the unit is securely mounted and stable.
• Environmental Conditions: While the unit is weather-proof, extreme temperatures or prolonged exposure to direct sunlight can affect performance. Operate within recommended environmental ranges.
• Software Updates: Check the manufacturer's website for any available firmware or software updates to ensure your unit has the latest features and performance enhancements.

Troubleshooting

This section addresses common issues you might encounter. For problems not listed here, please contact customer support.

Specifications

Warranty Information

For detailed warranty information regarding your Garrett PD 6500i metal detector, please refer to the warranty card included with your product packaging or visit the official Garrett Metal Detectors website. Warranty terms and conditions may vary by region and purchase date.

Customer Support

Should you require further assistance, technical support, or have questions not covered in this manual, please contact Garrett Metal Detectors customer service. Contact details can typically be found on the manufacturer's website or in your product documentation.

Please have your model number (PD 6500i) and serial number ready when contacting support.