Introduction
The Anlmz 3-in-1 Wireless Charging Station (Model CW350) is designed to provide a convenient and clutter-free charging experience for your Apple iPhone, Apple Watch, and AirPods. This station allows simultaneous wireless charging of all three devices with a single cable connection, simplifying your charging setup.
Image: The Anlmz 3-in-1 Wireless Charging Station in black, showcasing an iPhone, Apple Watch, and AirPods simultaneously charging on the stand.
Safety Information
- Ensure the charging station is placed on a stable, flat surface.
- Do not expose the device to water, moisture, or extreme temperatures.
- Avoid placing magnetic or metal objects, or credit cards, between your device and the charging surface, as this may interfere with charging or cause overheating.
- Do not attempt to disassemble or modify the charging station.
- Use only the provided 18W adapter and 3.3ft Type-C charging cable for optimal performance and safety.
- Keep out of reach of children.
Package Contents
Upon opening your package, please verify that all the following items are included:
- Anlmz 3-in-1 Wireless Charging Station
- 18W Power Adapter
- 3.3ft Type-C Charging Cable
- User Manual (this document)
Setup Guide
- Connect the Power Adapter: Insert the Type-C end of the provided charging cable into the charging port at the back of the station. Plug the USB-A end into the 18W power adapter, and then plug the adapter into a wall outlet.
- Placement: Place the charging station on a flat, stable surface, such as a desk or nightstand. Ensure there is adequate ventilation around the device.
- Indicator Light: A soft blue LED indicator light will illuminate when the station is powered on, indicating it is ready for use. This light is designed to be gentle and not disturb sleep.
Image: A diagram illustrating the power distribution of the 3-in-1 charging station: 10W for mobile phone, 3W for Apple Watch, and 5W for AirPods.
Operating Instructions
Charging Your Devices
This 3-in-1 charging station is designed for simultaneous charging of your compatible Apple devices:
- For iPhone: Place your iPhone vertically on the charging stand. Ensure the phone is centered on the charging area for optimal contact. The station supports iPhone 16e/16/16 Plus/16Pro/16 Pro max, 15/15 Plus/15Pro/15 Pro max, 14/14 Plus/14Pro/14 Pro max, 13/13Pro/13Pro Max/13 mini, 12/12Pro/12Pro Max/12 mini, 11/11Pro/11Pro Max, XS/XR/XS MAX/X, 8/8Plus.
- For Apple Watch: Place your Apple Watch on the magnetic charging module at the top of the stand. The module will securely hold your watch in place. Compatible with Apple iWatch 10/9/8/7/6/5/4/3/2/SE/Ultra 1/2.
- For AirPods: Place your AirPods charging case on the designated wireless charging pad at the base of the stand. Note: AirPods 2/3/4/Pro/Pro2 only support Mag-Safe Charging Case.
Important Notes for Charging:
- Phone Cases: To ensure normal charging and prevent overheating, please remove phone cases thicker than 5mm (0.2 inches) before charging.
- Obstructions: If magnetic and metal accessories or credit cards are detected on the charging surface, the blue indicator light will turn off, and charging will stop. Please remove these items before placing your device.
- Optimal Placement: Always adjust the charging position of your mobile phone to the center of the charging area. Improper alignment can lead to uneven charging or device heating.
- Fast Charging: The station is designed for fast charging, capable of fully charging your smart device in approximately 3.5 hours. Once fully charged, it automatically switches to trickle protection mode to prevent overcharging.
Image: Visual guide indicating that thick phone cases, Popsockets, metal cases, magnets, and credit cards should be removed for proper wireless charging.
Image: A detailed compatibility chart listing supported iPhone models (16e down to 8/8Plus), Apple Watch series (10 down to 2/SE/Ultra), and AirPods models (Pro2/Pro/4/3/2 with wireless charging case).
Maintenance
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the surface of the charging station. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the charging station in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging. | Device not properly aligned on the charging pad. Phone case is too thick. Metal objects or magnetic accessories are present. Power adapter or cable issue. | Adjust device position to the center of the charging area. Remove phone case if thicker than 5mm. Remove any metal or magnetic objects. Ensure the 18W adapter and cable are securely connected and functioning. |
| Device or charger overheating. | Improper device placement. Foreign objects on charging surface. Using an incompatible power adapter. | Ensure proper alignment. Remove any foreign objects. Use only the provided 18W adapter. |
| Blue LED indicator light is off. | No power connection. Metal/magnetic objects detected. | Check power connection to the wall outlet and charging station. Remove any metal or magnetic objects from the charging surface. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | CW350 |
| Product Dimensions | 3.86 x 3.86 x 5.04 inches |
| Item Weight | 8.1 ounces |
| Input Voltage | 9 Volts |
| Connectivity Technology | Wireless |
| Connector Type | USB Type C |
| Special Features | Fast Charging, Wireless Charging, Travel-friendly, Lightweight, 3-in-1 charging station for Apple devices |
| Color | Black |
| Manufacturer | SHENZHEN GTL TECHNOLOGY CO .,LTD |
Warranty and Support
Every Anlmz product undergoes a complete series of quality inspection procedures to ensure reliability. While specific warranty terms are not detailed here, Anlmz is committed to providing friendly customer service and aims to offer the best solution to any questions or issues within 24 hours. For support, please refer to the contact information provided in your product packaging or on the official Anlmz website.