Introduction
Thank you for purchasing the bontill UH200 Cool Mist Humidifier. This manual provides important information regarding the safe operation, installation, maintenance, and troubleshooting of your new humidifier. Please read this manual thoroughly before use and retain it for future reference.
Important Safety Instructions
To reduce the risk of fire, electric shock, or injury, please observe the following safety precautions:
- Always place the humidifier on a firm, flat, waterproof surface at least 12 inches (30 cm) away from walls and appliances.
- Do not place the humidifier directly on carpet, towels, or other absorbent surfaces.
- Ensure the power cord is not pinched or placed under heavy objects.
- Only use clean, cool tap water. Distilled or demineralized water is recommended to prevent white dust.
- Do not add essential oils directly into the water tank as this may damage the unit.
- Unplug the humidifier before filling, cleaning, or moving it.
- Do not operate the humidifier with a damaged cord or plug.
- Keep the humidifier out of reach of children and pets.
- Do not block the mist outlet or air intake vents.
- Do not immerse the base unit in water or other liquids.
Product Overview
The bontill UH200 is an ultrasonic cool mist humidifier designed to add moisture to the air in various room sizes, promoting a more comfortable environment.
Components

Image: Exploded view showing the 360° mist nozzle, 2.5-liter water tank, water tank cap, and mist output adjustment knob on the base unit. The AC power adapter is not shown.
- Mist Nozzle: Rotates 360 degrees to direct mist.
- Water Tank: 2.5-liter capacity for extended operation.
- Base Unit: Contains the ultrasonic transducer, fan, and control knob.
- Control Knob: Adjusts mist output from low to high.
- Water Tank Cap: Secures the water in the tank and contains the water valve.
Key Features
- Ultrasonic Cool Mist Technology: Quietly and efficiently humidifies the air.
- 2.5-Liter Water Tank: Provides up to 30 hours of continuous operation.
- Adjustable Mist Output: Dial control for customized humidity levels.
- 360° Rotating Nozzle: Directs mist where needed.
- Automatic Shut-Off: Unit turns off when water level is low or tank is removed.
- Filter-Free Operation: No replacement filters required.
- Whisper-Quiet Operation: Operates below 28dB, suitable for bedrooms and nurseries.
Setup and First Use
- Unpack: Carefully remove all packaging materials and place the humidifier on a flat, stable surface.
- Remove Water Tank: Grasp the water tank by the handle and lift it off the base unit.
- Fill Water Tank:

Invert the water tank and unscrew the water tank cap. Fill the tank with clean, cool tap water. Distilled or demineralized water is recommended to minimize mineral buildup and white dust. Do not fill with hot water or add any additives.
Image: A hand holding the inverted water tank under a running faucet, illustrating the filling process.
- Secure Cap: Screw the water tank cap back on tightly to prevent leaks.
- Place Tank on Base: Carefully place the filled water tank back onto the base unit, ensuring it is seated correctly.
- Connect Power: Plug the AC power adapter into a standard electrical outlet.
Operating Instructions
Turning On/Off and Adjusting Mist

1. Power On: Rotate the control knob clockwise from the 'OFF' position. The indicator light will illuminate, and mist will begin to emit from the nozzle.
2. Adjust Mist Output: Continue rotating the control knob clockwise to increase the mist output (towards 'MAX') or counter-clockwise to decrease it (towards 'LOW').
3. Direct Mist: Rotate the 360° mist nozzle to direct the mist flow as desired.
4. Power Off: Rotate the control knob counter-clockwise until it clicks into the 'OFF' position. The indicator light will turn off, and mist production will stop.
Image: A close-up view of the control knob on the humidifier base, showing 'MAX' and 'LOW' settings.
Automatic Shut-Off
The humidifier is equipped with an automatic shut-off feature for safety. When the water level in the tank becomes too low, or if the water tank is removed from the base, the unit will automatically turn off. The indicator light may change color or turn off to signal this condition. Refill the water tank to resume operation.
Care and Maintenance
Regular cleaning is essential for optimal performance and to prevent mineral buildup and bacterial growth.
Daily Maintenance
- Empty any remaining water from the tank and base.
- Rinse the water tank and base with fresh water.
- Wipe the base and transducer with a clean, soft cloth.
- Allow all parts to air dry completely before reassembly or storage.
Weekly Cleaning (or every 2-3 days with hard water)
- Unplug and Disassemble: Ensure the humidifier is unplugged. Remove the water tank and mist nozzle.
- Clean Water Tank: Unscrew the water tank cap. Fill the tank halfway with water and add 2 tablespoons of white vinegar. Shake vigorously and let it sit for 30 minutes. Rinse thoroughly with clean water until the vinegar smell is gone.
- Clean Base Unit:

Pour 2 tablespoons of white vinegar into the water reservoir of the base unit. Let it sit for 30 minutes. Use a soft brush (not metal) or a cotton swab to gently clean the ultrasonic transducer (the small disc in the center) and the surrounding area. Do not scrub forcefully. Carefully pour out the vinegar solution, avoiding the air outlet. Rinse the reservoir thoroughly with clean water.
Image: A hand wiping the inside of the humidifier base unit with a soft cloth, demonstrating the cleaning process.
- Clean Mist Nozzle: Rinse the mist nozzle under running water. Use a small brush if necessary to remove any buildup.
- Dry and Reassemble: Ensure all parts are completely dry before reassembling the humidifier.
Storage: If storing the humidifier for an extended period, ensure all parts are clean and dry. Store in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No mist or very little mist |
|
|
| Water leakage |
|
|
| Unusual odor |
|
|
| White dust around humidifier | Hard water minerals | Use distilled or demineralized water. Clean regularly. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | UH200 |
| Brand | bontill |
| Operation Mode | Ultrasonic Cool Mist |
| Water Tank Capacity | 2.5 Liters |
| Max Run Time | Up to 30 hours |
| Special Features | Auto Shut-Off, 360° Rotating Nozzle, Filter-Free |
| Product Dimensions | 5"D x 8"W x 9"H |
| Item Weight | 1.8 Pounds |
| UPC | 850036687139 |

Image: Product dimensions diagram for the bontill UH200 humidifier.
Warranty and Support
bontill products are manufactured to high-quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or visit the official bontill website. Please have your model number (UH200) and UPC (850036687139) available when contacting support.
For further assistance, you may also refer to the bontill Store on Amazon.





