Philips Sonicare DiamondClean 9000 Connected Rechargeable Electric Power Toothbrush User Manual

Introduction

Welcome to the Philips Sonicare DiamondClean 9000 user manual. This guide provides essential information for the proper setup, operation, and maintenance of your new electric toothbrush. The DiamondClean 9000 is designed to deliver an exceptional cleaning experience with advanced features like Bluetooth connectivity, multiple intensity settings, and smart sensor technology.

What's Included

Your Philips Sonicare DiamondClean 9000 package includes the following components:

• 2 DiamondClean 9000 Handles (Pink + White)
• 2 C3 Premium Plaque Defense Brush Heads
• 2 W2 Optimal White Standard Brush Heads
• 2 USB Charging Travel Cases
• 2 Glass Chargers
• 2 Charger Bases

Image: Contents of the Philips Sonicare DiamondClean 9000 2-pack, showing two handles, brush heads, charging glasses, and travel cases.

Setup

1. Unpack: Carefully remove all components from the packaging.
2. Charge Before First Use:
   • Place the handle into the charging glass or connect the USB travel case to a power source.
   • Allow the toothbrush to charge for at least 24 hours before its initial use to ensure full battery capacity. The battery indicator will show charging status.
3. Attach Brush Head: Align the brush head with the handle and push it down firmly until it clicks into place.
4. Download App (Optional): For a personalized brushing experience and to utilize smart features, download the Philips Sonicare app from your device's app store and follow the in-app instructions to connect your toothbrush via Bluetooth.

Operating Instructions

1. Wet Brush Head: Wet the brush head and apply a small amount of toothpaste.
2. Position Brush: Place the brush head against your teeth at a slight angle towards the gum line.
3. Power On: Press the power button to start brushing.
4. Brush Gently: Guide the brush head slowly from tooth to tooth. Allow the sonic vibrations to do the cleaning. Do not scrub.
5. Pressure Sensor: The handle will vibrate to alert you if you are applying too much pressure. Reduce pressure to stop the vibration.
6. SmarTimer & BrushPacer: The SmarTimer ensures you brush for the dentist-recommended 2 minutes, while the BrushPacer signals when to move to the next quadrant of your mouth.
7. Select Mode & Intensity:

   The DiamondClean 9000 offers 4 cleaning modes and 3 intensity settings:

   • Modes:
     • Clean: For exceptional everyday cleaning.
     • Deep Clean+: For an invigorating deep clean.
     • Gum Health: Special attention to molars and gentle gum massage.
     • White+: To remove surface stains and whiten teeth.
   • Intensities: High, Medium, Low. Adjust by pressing the intensity button.
8. Power Off: Press the power button again to turn off the toothbrush.

Smart Sensor Technology

Your DiamondClean 9000 is equipped with advanced smart sensor technology to enhance your brushing experience:

• Pressure Sensor: Alerts you by vibrating the handle if you are brushing too hard, helping to protect your gums and teeth.
• BrushSync Technology: Connects the smart handle and smart brush head. This technology optimizes brushing mode and intensity setting for each brush head.
• BrushSync Replacement Reminder: Always know when to replace brush heads. The handle will indicate when it's time for a new brush head based on your usage.
• Bluetooth Wireless Technology: Connects to the Philips Sonicare brushing app for personalized guidance and tracking of your brushing habits.

Maintenance

Cleaning Your Toothbrush

• After each use, rinse the brush head and bristles thoroughly under running water.
• Wipe the handle with a damp cloth. Do not immerse the handle in water.
• Clean the charging glass and base regularly with a damp cloth.

Brush Head Replacement

For optimal performance and hygiene, replace your Philips Sonicare brush head every 3 months, or sooner if the bristles are splayed or worn. The BrushSync Replacement Reminder will also alert you when it's time.

Charging

The Lithium ION battery provides approximately 14 days of operating time on a single full charge. Recharge your toothbrush when the battery indicator shows low power. The deluxe USB travel case also functions as a charger, allowing you to charge your toothbrush on the go by connecting it to a laptop or wall socket.

Troubleshooting

If you encounter any issues with your Philips Sonicare DiamondClean 9000, please refer to the common problems and solutions below:

Specifications

• Model: 9000
• Brand: PHILIPS Sonicare
• Battery Type: Lithium ION Rechargeable
• Operating Time (full to empty): 14 days
• Power Source: Corded Electric, Battery Powered
• Item Weight: 1.5 ounces
• Product Dimensions: 9.25 x 2.2 x 6.5 inches
• Color: Pink + White
• Special Features: Brushing Timer, Bluetooth Connectivity, Pressure Sensor, BrushSync Technology

Safety Information

Please read all safety information before using your Philips Sonicare DiamondClean 9000.

• Replace brush heads every 3 months.
• Not suitable for individuals with health conditions that may be affected by vibrations. Consult your dentist or physician if you have concerns.
• Do not use this product if it appears damaged in any way.
• Keep out of reach of children.
• Do not modify or attempt to repair the product yourself. Contact Philips customer service for assistance.

Warranty and Support

Philips provides a limited warranty for the DiamondClean 9000. For detailed warranty information, product registration, or technical support, please visit the official Philips Sonicare website or contact Philips customer service. Keep your proof of purchase for warranty claims.

Online Support: www.philips.com/sonicare