1. Introduction
Thank you for purchasing the Cristalrecord LED Ball Table Lamp, Model 88-444-30-777. This lamp features a modern design with integrated RGB LED lighting, a 6000K white light option, a digital clock, and an alarm function. It is designed for use as a desk or table lamp, providing both illumination and practical time-keeping features. Please read this manual carefully before use to ensure proper operation and maintenance.
2. Safety Instructions
- Ensure the lamp is placed on a stable, flat surface to prevent tipping.
- Do not expose the lamp to water or excessive humidity. This product is for indoor use only.
- Do not attempt to disassemble or modify the lamp. This may void the warranty and pose a safety risk.
- Keep the lamp away from direct heat sources or flammable materials.
- Use only the specified power adapter (if applicable) and battery type (3V battery for clock/alarm function).
- Clean the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- If the lamp is damaged, discontinue use immediately and contact customer support.
3. Package Contents
Please check the package for the following items:
- Cristalrecord LED Ball Table Lamp (Model 88-444-30-777)
- User Manual
- Power Adapter (if included separately, otherwise integrated)
- 3V Battery (for clock/alarm function, may be pre-installed or separate)
4. Setup
- Unpack the Lamp: Carefully remove the lamp and all accessories from the packaging. Retain packaging for future transport or storage.
- Place the Lamp: Position the lamp on a stable, flat surface in your desired location.
- Connect Power: Plug the power adapter into the lamp's power input port, then plug the adapter into a standard electrical outlet.
- Install Battery (if not pre-installed): Locate the battery compartment, usually at the base of the lamp. Insert one 3V battery, ensuring correct polarity (+/-). This battery powers the clock and alarm functions.
5. Operating Instructions
5.1. Power On/Off and Light Control
The lamp features tactile control for lighting functions.
- To Turn On/Off: Gently touch the designated tactile area on the lamp (refer to product diagram if available).
- To Change Light Color (RGB): With the lamp on, repeatedly touch the tactile area to cycle through the 7 available RGB colors.
- To Select White Light: Continue cycling through the RGB colors until the 6000K white light option is activated.
Image 1: The Cristalrecord LED Ball Table Lamp illuminated in red, showing the digital clock display.
Image 2: The Cristalrecord LED Ball Table Lamp illuminated in blue, showing the digital clock display.
Image 3: The Cristalrecord LED Ball Table Lamp illuminated in a darker blue, showing the digital clock display.
5.2. Setting the Clock and Alarm
The digital display shows the time and can be set for an alarm. Specific buttons or tactile areas for setting the clock and alarm are typically located near the display or on the base. Refer to the markings on your lamp for precise button identification (e.g., "SET", "MODE", "+", "-").
- To Set Time:
- Press the "SET" or "MODE" button until the hour digits flash.
- Use the "+" and "-" buttons to adjust the hour.
- Press "SET" or "MODE" again to move to the minute digits.
- Use the "+" and "-" buttons to adjust the minutes.
- Press "SET" or "MODE" to confirm and exit time setting mode.
- To Set Alarm:
- Press the "ALARM" or "MODE" button (possibly multiple times) until the alarm time digits flash. An alarm icon may appear.
- Use the "+" and "-" buttons to set the desired alarm hour.
- Press "ALARM" or "MODE" again to move to the alarm minute digits.
- Use the "+" and "-" buttons to set the desired alarm minutes.
- Press "ALARM" or "MODE" to confirm and activate the alarm.
- To Deactivate/Snooze Alarm: When the alarm sounds, typically a short press on any button (except "SET" or "MODE" if in setting mode) will snooze it, or a long press will deactivate it. Consult the specific button functions on your device.
6. Maintenance
- Cleaning: Disconnect the lamp from power before cleaning. Use a soft, dry, lint-free cloth to wipe the surface. Do not use liquid cleaners, sprays, or abrasive materials.
- Battery Replacement: When the clock or alarm function becomes unreliable or the display fades, it's time to replace the 3V battery. Ensure the lamp is unplugged. Open the battery compartment, remove the old battery, and insert a new 3V battery with correct polarity. Dispose of old batteries responsibly.
- Storage: If storing the lamp for an extended period, unplug it and remove the 3V battery to prevent leakage. Store in a cool, dry place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power connection. | Ensure the power adapter is securely plugged into both the lamp and the wall outlet. Check if the outlet is functional. |
| Light color does not change. | Tactile sensor not responding. | Ensure your finger is making proper contact with the tactile area. Try restarting the lamp by unplugging and replugging it. |
| Clock display is blank or incorrect. | Battery low or incorrectly installed. | Check the 3V battery. Replace if low or ensure it's installed with correct polarity. Reset the time. |
| Alarm does not sound. | Alarm not set or deactivated. | Verify that the alarm time is correctly set and the alarm function is activated. |
8. Specifications
| Brand | CristalRecord |
| Model Number | 88-444-30-777 |
| Light Source | LED (RGB + 6000K White) |
| Power | 4.50 W |
| Control | Tactile (Touch) |
| Additional Features | Digital Clock, Alarm Function |
| Clock/Alarm Battery | 1 x 3V Battery |
9. Warranty and Support
Cristalrecord products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Cristalrecord website. If you encounter any issues or require technical assistance, please contact Cristalrecord customer support through their official channels.
Website: www.cristalrecord.com (Example, please verify actual website)
