ODDSAN 77x36 Inch Large LED Lighted Bathroom Mirror Instruction Manual

1. Introduction

Thank you for choosing the ODDSAN 77x36 Inch Large LED Lighted Bathroom Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read these instructions thoroughly before installation and retain them for future reference.

2. Safety Information

• ETL Listed: This mirror is ETL Listed, ensuring it meets recognized safety standards.
• Tempered Glass: Constructed from tempered glass, which is 5 times stronger than ordinary mirror glass. It is designed not to shatter into sharp pieces if broken, enhancing safety.
• Electrical Installation: Installation involving hardwiring should only be performed by a qualified electrician to prevent electrical shock or fire hazards.
• Handling: Handle the mirror with care. Avoid dropping or subjecting it to strong impacts.
• Cleaning: Always disconnect power before cleaning. Use a soft, damp cloth and mild cleaner. Avoid abrasive cleaners or solvents.

3. Product Features

• Front and Backlit Design: Provides both direct front lighting for tasks like makeup and shaving, and ambient backlighting for a modern aesthetic.
• 3 Color Temperature Options: Easily switch between Warm White (3000K), Natural Light (4500K), and Cool White (6000K) to suit your preference or task.
• Dimmable Brightness: Adjust the light intensity from bright to dim by pressing and holding the dedicated button.
• Anti-Fog Function: An integrated defogger film prevents condensation on the mirror surface, ensuring a clear reflection even in steamy bathrooms. The defogger automatically turns off after 1 hour.
• Touch Sensor Controls: Intuitive touch buttons for power, color temperature, dimming, and anti-fog activation.
• Memory Function: The mirror retains your last chosen brightness and color temperature settings when powered off and on.

Image: Demonstrates the three color temperature options and dimmable feature.

Image: Illustrates the anti-fog function keeping the mirror clear.

4. Package Contents

Please check the package to ensure all components are present:

• ODDSAN LED Bathroom Mirror (1 unit)
• Mounting Screws (4 sets)
• Mounting Brackets (2 pieces)
• Gloves (1 pair)
• Instruction Manual (this document)

Image: Contents of the mirror package, including mounting hardware and gloves.

5. Installation

The ODDSAN LED mirror can be powered either by plugging it into an outlet or by hardwiring it directly. Professional electrical installation is recommended for hardwiring.

5.1 Mounting the Mirror

1. Prepare the Wall: Ensure the mounting surface is clean, dry, and capable of supporting the mirror's weight (approximately 50.9 pounds).
2. Install Brackets: Fix the two provided brackets horizontally on the wall at the desired height and spacing. The mirror uses a French cleat system for secure hanging.
3. Hang the Mirror: Carefully lift the mirror and align the long bracket on the back edge of the mirror with the installed wall brackets. Gently lower the mirror until it is securely seated on the brackets.

5.2 Power Connection

• Plug-in Option: If using the plug-in option, simply plug the mirror's power cord into a standard electrical outlet.
• Hardwire Option: For hardwiring, a qualified electrician should connect the mirror's wiring directly to your home's electrical system. Ensure the power supply is turned off at the circuit breaker before beginning any wiring work.

Image: Illustrates the mirror's dimensions and the two available power connection methods.

Image: Step-by-step visual guide for mirror installation.

6. Operation

The mirror features intuitive touch controls located on the mirror surface.

• Power On/Off: Touch the power button (usually the leftmost icon) to turn the lights on or off.
• Change Color Temperature: With the lights on, tap the light bulb icon to cycle through the three color temperatures: Warm White (3000K), Natural Light (4500K), and Cool White (6000K).
• Adjust Brightness (Dimming): With the lights on, press and hold the middle button (up/down arrow icon) to adjust the brightness. Release when the desired brightness is achieved. The mirror will remember your last setting.
• Activate Anti-Fog: Touch the anti-fog button (wavy lines icon) to activate the defogger. The button will illuminate white when on and blue when off. The defogger will automatically turn off after 1 hour.

7. Maintenance

Proper care will ensure the longevity and appearance of your mirror.

• Cleaning the Mirror Surface: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to avoid liquid seeping into the electrical components.
• Cleaning the Frame: Wipe the frame with a soft, damp cloth. Avoid harsh chemicals that could damage the finish.
• Avoid Excessive Moisture: While the mirror has an anti-fog function, avoid directly spraying water onto the electrical components or the back of the mirror.

8. Troubleshooting

• Lights Not Turning On:
  • Check if the mirror is properly plugged in or hardwired.
  • Ensure the power outlet or circuit breaker is supplying electricity.
  • Verify that the touch power button is being pressed correctly.
• Anti-Fog Not Working:
  • Ensure the anti-fog function is activated (button illuminates white).
  • Allow a few minutes for the defogger to heat up and clear the mirror.
• Lights Flickering or Dim:
  • Check for loose connections if hardwired.
  • Ensure the dimming function is not set to its lowest level.

If you encounter issues not listed here or require further assistance, please contact ODDSAN customer support.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact ODDSAN customer service directly. You can typically find contact details on the manufacturer's website or through your retailer.