Introduction
This manual provides essential instructions for the installation, operation, and maintenance of your SCREENTRONICS Wire Harness Replacement. This product is designed to provide a seamless connection for various Pioneer AVIC, AVH, and DEH series car radios, ensuring proper functionality without modifying your vehicle's original wiring.
What's in the Box
- 1 x SCREENTRONICS Wire Harness Replacement (Model Wire #12)
Compatibility
This wire harness is compatible with a wide range of Pioneer car radio models. Please verify your specific model against the lists below:
Pioneer AVIC-Series Models:
- AVIC-D3, AVIC-F10BT, AVIC-F700BT, AVIC-F7010BT, AVIC-F710BT, AVIC-F900BT, AVIC-F90BT, AVIC-F910BT, AVIC-F920BT, AVIC-F9110BT, AVIC-F9310BT, AVIC-X7115BT, AVIC-X910BT, AVIC-X9115BT, AVIC-X920BT, AVIC-X930BT, AVIC-X9310BT, AVIC-X940BT, AVIC-Z110BT, AVIC-Z120BT, AVIC-Z130BT, AVIC-Z140BH
Pioneer AVH-Series Models:
- AVH-100DVD, AVH-200BT, AVH-P1400DVD, AVH-P2300DVD, AVH-P2400BT, AVH-P3100DVD, AVH-P3200BT, AVH-P3200DVD, AVH-P3300BT, AVH-P3400BH, AVH-P3450DVD, AVH-P4100DVD, AVH-P4200DVD, AVH-P4300DVD, AVH-P4400BH, AVH-P8400BH, AVH-X1500DVD, AVH-X1600DVD, AVH-X2500BT, AVH-X2600BT, AVH-X3500BHS, AVH-X3600BHS, AVH-X4500BT, AVH-X4600BT, AVH-X5500BHS, AVH-X5600BHS, AVH-X8500BHS
Pioneer DEH, FH-Series Models:
- DEH-1200MP, DEH-9, DEH-10MP, DEH-1900MP, DEH-2000MP, DEH-2050MP, DEH-P350, DEH-P360, DEH-P390MP, DEH-P550MP, DEH-P560MP, DEH-P580MP, DEH-P650, DEH-P660, DEH-P670MP, DEH-P680MP, DEH-P750MP, DEH-P760MP, DEH-P770MP, DEH-P2900MP, DEH-P3000IB, DEH-P3500, DEH-P3600, DEH-P3900MP, DEH-P5500MP, DEH-P5800MP, DEH-P5900iB, DEH-P5900MP, DEH-P6500, DEH-P6600, DEH-P6700MP, DEH-P6800MP, DEH-P7500MP, DEH-P7600MP, DEH-P7700MP, FH-P4200MP
Setup and Installation
The SCREENTRONICS Wire Harness is designed for straightforward installation, allowing you to connect your Pioneer car radio without cutting into the original equipment manufacturer (OEM) wiring harness. A color wiring diagram is included to assist with proper connections.
Installation Steps:
- Preparation: Ensure your vehicle's battery is disconnected before beginning any electrical work. Remove your existing car radio from the dashboard.
- Identify Connections: Refer to the included color wiring diagram and your car radio's manual to identify the corresponding wires for power, ground, speakers, and other functions.
- Connect Harness: Match the wires from the SCREENTRONICS harness to the appropriate wires from your vehicle's wiring. Use proper crimp connectors or solder connections, ensuring each connection is secure and insulated. The harness is a 16-pin connector designed to plug directly into compatible Pioneer units.
- Secure Connections: Once all wires are connected, ensure they are neatly bundled and secured to prevent pinching or accidental disconnection.
- Test Functionality: Reconnect the vehicle's battery and test the car radio's functions (power, audio, balance, fader, specific features like parking brake bypass, if applicable) before fully reassembling the dashboard.
Image: Easy Installation Diagram. This diagram illustrates how the 16-pin radio harness connects to a car radio, highlighting that no cutting of the OEM wiring harness is required. A color wiring diagram is included for guidance.
Video: Wire Harness Overview. This video provides a visual demonstration of the SCREENTRONICS wire harness, showcasing its components and general appearance, which can be helpful during the installation process.
Image: High-Quality Materials. This image highlights the construction of the wire harness, featuring high-purity copper wires with double wrap and heat-resistant insulation for durability and reliable performance.
Operating Instructions
Once the SCREENTRONICS Wire Harness is correctly installed, it acts as an intermediary connection, facilitating the proper electrical flow and signal transmission between your vehicle and the Pioneer car radio. There are no specific operating instructions for the harness itself, as its function is passive. The operation of your car radio will proceed as described in its own user manual.
Maintenance
The SCREENTRONICS Wire Harness is designed for durability and requires minimal maintenance. To ensure long-term performance:
- Periodic Inspection: If you ever need to access your car radio, visually inspect the harness connections for any signs of wear, corrosion, or loose wires.
- Secure Placement: Ensure the harness and its connections remain securely tucked away behind the dashboard, free from pinching, excessive tension, or exposure to moisture.
- Cleaning: If necessary, gently clean any dust or debris from the connectors using a dry, soft cloth. Do not use liquid cleaners directly on electrical connections.
Troubleshooting
If you encounter issues after installing the wire harness, consider the following troubleshooting steps:
- No Power to Radio:
- Verify that the vehicle's battery is properly reconnected and charged.
- Check the main power (usually yellow and red wires) and ground (black wire) connections on the harness. Ensure they are secure and correctly matched to the vehicle's wiring.
- Inspect any inline fuses in the vehicle's wiring or the radio itself.
- No Audio Output / Speaker Issues:
- Confirm all speaker wires (pairs of solid color and striped color) are correctly connected and that polarity (+/-) is maintained. Incorrect polarity can lead to weak or distorted sound.
- Ensure the amplifier turn-on wire (if applicable, usually blue) is connected to the radio's remote output.
- Harness Not Fitting Securely:
- Double-check the compatibility list to ensure the harness is designed for your specific Pioneer radio model.
- Examine the connector for any obstructions or bent pins. Ensure the locking clip engages properly when inserted into the radio's port.
- Specific Radio Functions Not Working (e.g., parking brake bypass, reverse camera trigger):
- Carefully review the included color wiring diagram and your Pioneer radio's manual for the correct connection points for these specific functions. Wiring colors for these auxiliary functions can sometimes vary between aftermarket harnesses and OEM standards.
If these steps do not resolve the issue, it is recommended to consult a professional car audio installer.
Specifications
| Feature | Detail |
|---|---|
| Brand | SCREENTRONICS |
| Model | Wire #12 |
| Material | Copper, TPE (Thermoplastic Elastomer) |
| Item Weight | 0.04 kg |
| Connector Type | 16-Pin Car Radio Connector |
| Number of Items | 1 (Wire Harness) |
| UPC | 685674637303 |
| Included Components | Wire Harness, Color Wiring Diagram |
Warranty and Support
For specific warranty information regarding your SCREENTRONICS Wire Harness, please refer to the product packaging or contact the retailer where the product was purchased. SCREENTRONICS is committed to providing quality products.
Customer Support:
If you require further assistance, have questions about installation, or need to report a product issue, please contact SCREENTRONICS customer service through the vendor's contact information provided at the point of purchase or on the official SCREENTRONICS website.