DEIOVWXS MM-M
DEIOVWXS Lighted Makeup Mirror User Manual
Model: MM-M
Introduction
Thank you for choosing the DEIOVWXS Lighted Makeup Mirror. This manual provides essential information for the safe and efficient use of your new mirror. Please read it thoroughly before operation and retain it for future reference.

The DEIOVWXS Lighted Makeup Mirror, featuring a sleek chrome finish and a sturdy base.
Key Features
1x/10x Magnification
This mirror features a classic dual-sided design with 1X and 10X magnification. The 1X side provides a standard reflection for general makeup application, while the 10X side is ideal for detailed tasks such as applying eyeliner, tweezing eyebrows, or inserting contact lenses.

Visual comparison of 1x and 10x magnification, highlighting detailed use cases. When using the 10x magnifying side, maintain a distance of approximately 6 inches from the mirror to ensure clarity and prevent dizziness.
3 Color Lights & Stepless Brightness
Equipped with 80 high-brightness LED lamp beads, the mirror offers three distinct light color modes: white light, warm light, and cold light. These modes simulate various lighting environments, allowing for precise makeup application. The brightness is steplessly adjustable to suit your preference, and the mirror retains your last brightness setting for convenience.

The mirror offers Cool, Natural, and Warm light settings to adapt to different environments.

Adjust the brightness seamlessly from 10% to 100% to achieve optimal lighting.
360° Rotation & Rechargeable Battery
The mirror features a 360° swivel design, allowing you to easily adjust the angle and switch between the 1X and 10X sides. It is equipped with a built-in 3000 mAh rechargeable battery, providing up to 4 hours of continuous wireless use on a full charge. This eliminates the need for frequent battery replacements.

The mirror's 360° rotation allows for versatile positioning, and it conveniently charges via a USB cable.

The charging port is located on the side of the mirror for easy access.
Setup Guide
Unpacking
Carefully remove all components from the packaging. Ensure all parts are present: the mirror unit, base, and USB charging cable. Inspect for any damage during transit.
Initial Charging
Before first use, fully charge the mirror. Connect the provided USB charging cable to the mirror's charging port and plug the other end into a compatible USB power adapter (not included) or a computer USB port. The charging indicator light will typically show charging status and turn off or change color when fully charged. A full charge takes approximately 4-5 hours.
Operating Instructions
Power On/Off and Light Modes
Locate the touch sensor switch on the mirror surface. Short press the sensor switch to turn the mirror lights on. Each subsequent short press will cycle through the three light color modes (white, warm, cold). To turn off the lights, continue short pressing until the lights turn off, or long press the sensor switch.
Adjusting Brightness
When the lights are on, long press the touch sensor switch. The brightness will gradually increase or decrease. Release your finger when the desired brightness level is reached. The mirror will remember your last brightness setting for future use.
Using Magnification
To switch between 1X and 10X magnification, simply rotate the mirror head 360 degrees. For optimal clarity and to avoid dizziness when using the 10X magnification, position your face approximately 6 inches (15 cm) away from the mirror surface.
Care and Maintenance
Cleaning
- To clean the mirror surface, gently wipe with a soft, lint-free cloth.
- For stubborn spots, dampen the cloth slightly with water or a mild, non-abrasive glass cleaner.
- Avoid using harsh chemicals, abrasive cleaners, or rough cloths, as these can scratch the mirror or damage the finish.
- Do not immerse the mirror in water or allow water to enter the electrical components.
Storage
- Store the mirror in a cool, dry place away from direct sunlight and extreme temperatures.
- Ensure the mirror is turned off when not in use to conserve battery life.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror lights do not turn on. | Battery is depleted. | Charge the mirror fully using the provided USB cable. |
| Mirror lights flicker or are dim. | Low battery or unstable power source. | Recharge the mirror. Ensure the charging cable is securely connected. |
| Touch sensor is unresponsive. | Finger is wet or dirty; temporary software glitch. | Ensure your finger is clean and dry. Try restarting the mirror by plugging/unplugging the charging cable. |
| 10X magnification causes dizziness. | Too close to the mirror. | Maintain a distance of approximately 6 inches (15 cm) from the 10X side. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | DEIOVWXS |
| Model Number | MM-M |
| Magnification | 1X / 10X Double-Sided |
| Light Modes | 3 Colors (White, Warm, Cold) |
| Brightness | Steplessly Adjustable |
| Rotation | 360° Swivel |
| Battery Capacity | 3000 mAh Lithium Polymer |
| Material | Metal (Chrome Finish) |
| Product Dimensions | 15"L x 8"W (Overall) |
| Item Weight | 2.46 pounds |
Warranty Information
This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the product packaging or contact customer support for specific warranty terms and conditions.
Customer Support
For any questions, technical assistance, or warranty claims, please contact DEIOVWXS customer support through the retailer's platform or visit the official DEIOVWXS store page on Amazon. Please have your model number (MM-M) and purchase details ready when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.