Vangoa PD
Vangoa VPPD-S Guitar Pedal Board User Manual
Model: VPPD-S (PD)
1. Introduction
Thank you for choosing the Vangoa VPPD-S Guitar Pedal Board. This manual provides essential information for the proper setup, operation, and maintenance of your new pedal board. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Product Features:
- All-in-One Design: Features a built-in true isolated power supply with 8 outputs to reduce noise and prevent ground loops.
- Portable Size: Compact dimensions (16.1" x 6.5") suitable for 5-7 pedals, making it easy to transport.
- Stable Foldable Legs: Provides a 20-degree elevation angle for comfortable access and accurate operation, with durable foot pads for stability.
- Solid-built, Reliable Support: Constructed from aerospace-grade aluminum alloy for sturdiness and ultra-lightweight design. One-piece bent design ensures stability without welding bumps.
- Dynamic Light Effects: Integrated LED lights respond to music, enhancing visual appeal during performances.
Package Contents:
- Vangoa PD-S Power Board
- Power Adapter
- DC Power Cables (15cm x 8)
- Velcro (2 rolls)
- 2-in-1 DC Connecting Cable
- Carrying Bag
- User Manual
- Schematic Diagram
Figure 1: Vangoa Guitar Pedal Board and included accessories.
2. Setup
2.1 Unpacking and Inspection
Carefully remove all components from the packaging. Inspect the pedal board and accessories for any signs of damage during transit. If any damage is found, contact customer support immediately.
2.2 Attaching Pedals
- Apply the provided Velcro (hook side) to the bottom of your guitar pedals.
- Apply the provided Velcro (loop side) to the surface of the pedal board where you intend to place your pedals.
- Press the pedals firmly onto the pedal board to secure them in place.
Figure 2: Attaching pedals to the board using the provided hook and loop fasteners.
2.3 Powering Your Pedals
The Vangoa VPPD-S features a built-in isolated power supply. Connect your pedals to the 9V DC outputs using the provided DC power cables. The pedal board offers 8 isolated 9V/100mA outputs.
Figure 3: Detail of the isolated power supply outputs located on the underside of the pedal board.
Connect the main power adapter to the "Power Input" port on the pedal board and then to a standard electrical outlet.
3. Operating Instructions
3.1 Powering On/Off
Locate the ON/OFF switch on the pedal board. Press the switch to power on or power off the unit. The LED level indicators will illuminate when the unit is powered on.
Figure 4: Power switch and LED indicators on the Vangoa pedal board.
3.2 Connecting Audio
Connect your guitar or other audio source to the "IN" jack on the pedal board. Connect your amplifier or other audio output device to the "OUT" jack.
3.3 Adjusting LED Light Effects
The pedal board features dynamic LED lights that react to the music signal. A potentiometer is located on the board to adjust the sensitivity or intensity of these lights. Adjust this knob to your preference.
Figure 5: Location of the potentiometer for adjusting LED light effects.
3.4 Using Foldable Legs
The pedal board is equipped with foldable legs that allow for an elevated, angled position (approximately 20 degrees) for easier access to pedals. To deploy the legs, gently pull them outwards until they lock into place. To fold them back, push them inwards until they are flush with the board.
Figure 6: Demonstrating the foldable legs for angled or flat use.
4. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the pedal board. Avoid using abrasive cleaners or solvents.
- Storage: When not in use, store the pedal board in its provided carry bag to protect it from dust and damage. Store in a cool, dry place.
- Cable Management: Regularly check all power and audio cables for wear and tear. Replace damaged cables immediately to prevent electrical hazards or signal loss.
- Velcro Maintenance: The hook and loop fasteners may accumulate dust or debris over time, reducing their effectiveness. Clean them periodically with a stiff brush.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to pedals / LEDs not lighting up | Power adapter not connected or faulty; ON/OFF switch is off; Pedal board internal issue. | Ensure power adapter is securely connected to both the board and the outlet. Turn the ON/OFF switch to the 'ON' position. If problem persists, contact customer support. |
| Humming or buzzing noise | Ground loop; Faulty cables; High LED light sensitivity. | The isolated power supply is designed to minimize ground loops. Ensure all cables are in good condition. Try adjusting the LED light sensitivity potentiometer. |
| Pedals not powering on properly (requires re-plugging) | Power-on logic difference between the pedal and the board (normal for some pedals). | This is a normal phenomenon for certain pedals. Simply unplug and re-plug the power cable to the affected pedal. Consider using an independent power supply for such pedals if this becomes inconvenient. |
| Pedals not sticking to the board | Velcro is dirty or worn out. | Clean the Velcro on both the pedals and the board. If necessary, replace the Velcro. |
6. Specifications
| Feature | Detail |
|---|---|
| Model | VPPD-S (PD) |
| Dimensions | 16.1" x 6.5" x 1.18" (41cm x 16.5cm x 3cm) |
| Weight | 2.8 lbs (1.3 kg) |
| Material | Aerospace-grade Aluminum Alloy |
| Power Input | 18V |
| Power Output | 8 x 9V DC (100mA each, isolated) |
| DC Connector | 8+1pcs (3.9x3.1mm) |
| Foldable Legs Angle | 20-degree elevation |
Figure 7: Product parameters and dimensions of the Vangoa VPPD-S pedal board.
7. Warranty Information
Vangoa products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please refer to the warranty card included in your package or visit the official Vangoa website for detailed warranty terms and conditions.
Note: The warranty does not cover damage caused by misuse, accident, modification, unauthorized repair, or normal wear and tear.
8. Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Vangoa customer support through the following channels:
- Website: Visit the official Vangoa website for FAQs, product registration, and support contact information.
- Email: Refer to your product packaging or the Vangoa website for the customer support email address.
- Amazon Store: You can also visit the Vangoa Store on Amazon for product information and seller contact options.
Please have your product model number (VPPD-S or PD) and purchase date ready when contacting support.