1. Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Kenneth Cole REACTION KRWGP9006703 Analogue-Digital Men's Watch. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your timepiece.
2. Product Overview
The Kenneth Cole REACTION KRWGP9006703 is an Ana-Digital watch, combining traditional analog hands with a digital display for versatile timekeeping. Familiarize yourself with the watch components using the images below.
Figure 2.1: Front View of the Watch. This image displays the watch face, showing both the analog hands and the digital display. Key buttons labeled 'LIGHT', 'START', 'MODE', and 'RESET' are visible around the bezel, along with the crown on the right side.
Figure 2.2: Angled View of the Watch. This perspective highlights the watch's profile, the texture of the green silicone strap, and the robust black case. The various buttons and their positions are clearly visible.
Figure 2.3: Back View of the Watch. The stainless steel caseback is shown, engraved with product details such as 'STAINLESS STEEL CASEBACK', '3 ATM', 'JAPAN/CHINA MOVEMENT', and the model number 'GP90067'. Battery information 'SR626SW/CR2025' is also visible.
2.1 Watch Components
- Analog Display: Traditional hour, minute, and second hands.
- Digital Display: Shows time, date, and other digital functions.
- Crown: Used for setting analog time.
- Buttons:
- LIGHT: Activates backlight for digital display.
- START: Used for starting/stopping functions like stopwatch.
- MODE: Cycles through digital display modes (e.g., time, date, alarm, stopwatch).
- RESET: Used for resetting functions or adjusting settings.
- Strap: Green Silicone Strap for comfortable wear.
- Case: Durable IP Black Case.
3. Setup Instructions
3.1 Setting Analog Time
- Pull the crown out to the first position.
- Turn the crown clockwise or counter-clockwise to adjust the hour and minute hands to the desired time.
- Once the analog time is set, push the crown back into its normal position.
3.2 Setting Digital Time and Date
The exact procedure may vary slightly depending on the specific module. Generally, follow these steps:
- Press the MODE button repeatedly until you reach the Time Setting mode (often indicated by flashing digits).
- Use the RESET button to select the digit or setting you wish to adjust (e.g., hours, minutes, year, month, day).
- Use the START button to increase the selected value. Hold it down for faster adjustment.
- Repeat steps 2 and 3 until all desired settings (hour, minute, AM/PM, year, month, day) are correctly set.
- Press the MODE button again to exit the setting mode and return to normal time display.
4. Operating Instructions
4.1 Using Digital Modes
Press the MODE button to cycle through the various digital functions. Common modes include:
- Time Display: Shows current digital time (hours, minutes, seconds, AM/PM).
- Date Display: Shows current date (month, day, day of week).
- Alarm: Allows setting and activating an alarm.
- Stopwatch: Measures elapsed time.
- Timer: Counts down from a preset time.
4.2 Stopwatch Function
- Press MODE until the stopwatch display appears.
- Press START to begin timing.
- Press START again to pause timing.
- Press RESET to clear the stopwatch to zero.
- To resume timing after pausing, press START.
4.3 Alarm Function
- Press MODE until the alarm setting display appears.
- Use RESET to select the hour or minute digits.
- Use START to adjust the selected value.
- Press MODE to confirm the alarm time and exit.
- To turn the alarm ON/OFF, typically press START while in the alarm display mode.
4.4 Backlight (LIGHT Button)
Press the LIGHT button to illuminate the digital display for a few seconds, allowing visibility in low-light conditions.
5. Maintenance
5.1 Cleaning Your Watch
- Wipe the watch case and strap regularly with a soft, dry cloth to remove dust and dirt.
- For silicone straps, a damp cloth with mild soap can be used, then rinse thoroughly and dry completely.
- Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish.
5.2 Water Resistance (3 ATM)
Your watch has a water resistance rating of 3 ATM (30 meters). This means it is suitable for everyday use and can withstand splashes or brief immersion in water, such as hand washing or rain. It is not suitable for showering, bathing, swimming, snorkeling, or any water sports.
- Do not operate any buttons or the crown while the watch is wet or submerged.
- Ensure the crown is fully pushed in after setting the time to maintain water resistance.
5.3 Battery Information
The watch is powered by 1 Lithium Ion battery (included). The caseback indicates battery types SR626SW (for analog movement) and CR2025 (for digital module). When the display becomes dim or the watch stops functioning, it may be time for a battery replacement. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and water resistance.
6. Troubleshooting
6.1 Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Analog hands not moving | Dead battery for analog movement, or crown is pulled out. | Push the crown in. If still not working, replace battery (SR626SW). |
| Digital display is blank or dim | Dead battery for digital module. | Replace battery (CR2025). |
| Incorrect time/date displayed | Time/date not set correctly, or accidental adjustment. | Refer to Section 3.1 and 3.2 to reset time and date. |
| Buttons not responding | Watch may be in a locked mode, or low battery. | Try pressing MODE to exit current function. If issue persists, consider battery replacement. |
If the problem persists after attempting these solutions, please contact customer support or a qualified watch repair service.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | KRWGP9006703 |
| Function | Ana-Digital |
| Case Material | IP Black Case |
| Case Diameter | 43.5 Millimeters |
| Dial Color | Green |
| Glass Type | Mineral |
| Strap Material | Green Silicone |
| Water Resistance | 3 ATM (30 meters) |
| Watch Movement Type | Quartz |
| Batteries | 1 Lithium Ion battery (included) - SR626SW for analog, CR2025 for digital |
| Product Dimensions (LxWxH) | 10 x 2 x 10 Centimeters |
| Item Weight | 118 Grams |
| Manufacturer | ILG Asia |
8. Warranty and Support
8.1 Warranty Information
Your Kenneth Cole REACTION KRWGP9006703 watch comes with a 1 Year Manufacturer Warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear.
Please retain your proof of purchase for warranty claims.
8.2 Customer Support
For technical assistance, warranty claims, or service inquiries, please contact the manufacturer or authorized service center. Refer to your purchase documentation for specific contact details.
Manufacturer: ILG ASIA LIMITED
Importer/Packer: ILG INDIA FASHION LLP
Contact information for ILG INDIA FASHION LLP: Pinnacle Business Park, F1-4, First floor, next to Ahura Center, Mahakali caves Road, Andheri east, Mumbai - 400093.