1. Product Overview
The ROCKBROS Heated Cycling Gloves are designed to provide warmth and protection during cold weather activities such as cycling and mountaineering. They feature a windproof exterior, a padded polar fleece interior, and an extended wrist design to prevent cold air penetration. The gloves include a rechargeable battery system with three adjustable heating modes and a sensitive touchscreen compatible design.
- Warm and Windproof: Constructed with windproof material and polar fleece lining for effective cold protection.
- Three Heating Modes: Adjustable temperature settings for various conditions.
- Rechargeable Batteries: Equipped with two 4000 mAh lithium batteries for extended use.
- Sensitive Touchscreen: Conductive material on index finger and thumb for device operation.
- Anti-slip Design: Silicone strip on the palm for enhanced grip and stability.
- Reflective Elements: Integrated reflective stripes for increased visibility during night activities.
Figure 1.1: Double protection with windproof fabric and thickened polar fleece liner.
2. Setup Instructions
2.1. Battery Installation
Each glove is equipped with a hidden battery compartment on the wrist.
- Locate the zippered pocket on the inside of the glove's wrist cuff.
- Carefully insert one 4000 mAh lithium battery into the pocket.
- Connect the battery cable from the glove to the battery.
- Close the zipper to secure the battery in place.
- Repeat for the second glove.
Figure 2.1: Battery and hidden compartment on the glove's wrist. The charging port and power button are visible on the battery unit.
2.2. Initial Charging
Before first use, fully charge both batteries.
- The charging head is not included with the gloves. Use a compatible 5V USB charging adapter.
- For the first charge, allow approximately 12 hours for the batteries to reach full capacity.
- Subsequent charges typically take 5-6 hours.
- Ensure the batteries are fully charged for optimal performance and battery life.
3. Operating Instructions
3.1. Powering On and Adjusting Heat Settings
The gloves feature a single button control for power and temperature adjustment.
- Press and hold the power button on the back of the glove for 3 seconds to turn on the heating function. The indicator light will illuminate.
- Press the button briefly to cycle through the three heating modes:
- High Temperature (Red light): 60-65°C (140-149°F), approximately 1.5 hours usage time.
- Medium Temperature (Blue light): 50-55°C (122-131°F), approximately 2.5 hours usage time.
- Low Temperature (Green light): 40-45°C (104-113°F), approximately 4 hours usage time.
- To turn off the gloves, press and hold the power button for 3 seconds until the indicator light turns off.
Figure 3.1: Temperature control panel with three heat settings and estimated battery life.
3.2. Touchscreen Functionality
The gloves are designed with reactive conductive leather on the index finger and thumb, allowing you to operate electronic devices without removing the gloves.
- Ensure the conductive material on your index finger and thumb makes full contact with the device screen.
- This feature is compatible with most capacitive touchscreens found on smartphones, tablets, and GPS devices.
Figure 3.2: Using a smartphone with the touchscreen-compatible gloves.
3.3. Anti-slip Grip
The palm of the gloves features an anti-slip silicone strip to provide a stable and secure grip, especially useful during cycling.
Figure 3.3: Detail of the anti-slip design on the glove's palm.
4. Maintenance
4.1. Cleaning the Gloves
- Always remove the batteries before cleaning the gloves.
- Hand wash the gloves gently with mild soap and cold water. Do not machine wash, tumble dry, or iron.
- Do not wring the gloves. Gently squeeze out excess water.
- Hang the gloves to air dry completely before reinstalling batteries or storing. Ensure no moisture remains in the battery compartments or heating elements.
4.2. Battery Care and Storage
- Charge batteries regularly, even if not in use, to maintain battery health. It is recommended to charge them at least once every three months.
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- If the gloves will not be used for an extended period, remove the batteries from the gloves.
- Do not puncture, incinerate, or short-circuit the batteries.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Gloves not heating |
|
|
| Short battery life |
|
|
| Touchscreen not responding |
|
|
6. Product Specifications
| Feature | Detail |
|---|---|
| Brand | ROCKBROS |
| Model Number | 16410002001/RBS |
| ASIN | B0BCJVR8CN |
| Material | Polyester |
| Color | Black |
| Batteries | 2 x 4000 mAh Lithium-metal batteries (included) |
| Power Source | Battery Powered, Electric |
| Heating Modes | 3 (High, Medium, Low) |
| Max Temperature | 65°C (149°F) |
| Package Dimensions | 39.5 x 14.5 x 5.5 cm |
| Department | Unisex-adult |
Figure 6.1: Size chart for selecting the correct glove size.
7. Warranty Information
According to the product specifications, the warranty description is listed as "Niet-actief" (Not active). Please refer to your point of purchase or the seller for any specific return or warranty policies that may apply.
8. Customer Support
For further assistance, questions, or concerns regarding your ROCKBROS Heated Cycling Gloves, please contact the seller or ROCKBROS customer service through their official channels.
You can often find contact information on the product packaging or the retailer's website where the product was purchased.