PawHut Bird Cage with Stand and Wheels

Introduction

This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your PawHut Bird Cage, model D10-019V01WT. Please read these instructions carefully before assembly and use to ensure safe and proper operation. Keep this manual for future reference.

Safety Instructions

• Ensure all parts are securely fastened before placing birds inside the cage.
• Do not allow children to climb on or play with the cage.
• Place the cage on a stable, level surface.
• Regularly inspect the cage for any damaged or loose parts that could harm your birds.
• Keep the cage away from direct sunlight, drafts, and extreme temperatures.
• Use caution when moving the cage, especially with birds inside. Engage wheel brakes when stationary.

Package Contents

Before assembly, verify that all components listed below are present and undamaged.

• Bird Cage Panels (Top, Bottom, Sides, Front, Back)
• Cage Stand Frame
• Storage Shelf for Stand
• 4 Wheels (2 with brakes)
• Removable Bottom Tray
• 3 Wooden Perches
• 1 Bird Swing
• 4 Plastic Feeders/Water Bowls
• Assembly Hardware (screws, nuts, etc.)
• Instruction Manual

Assembly Instructions

Follow these steps carefully to assemble your bird cage. It is recommended to have two people for assembly.

1. Assemble the Cage Stand:

   Attach the four wheels to the bottom of the stand frame. Ensure the two wheels with brakes are positioned on the same side for easy access. Secure the storage shelf to the lower part of the stand frame.

   

2. Assemble the Cage Body:

   Connect the side, front, and back panels of the cage using the provided hardware. Ensure all panels align correctly and are securely fastened. Attach the top panel to complete the main cage structure.

   

3. Install Internal Accessories:

   Insert the wooden perches through the designated holes in the cage panels. Hang the bird swing from the top of the cage. Place the plastic feeders/water bowls into the sliding door openings.

   

4. Insert the Removable Tray:

   Slide the removable bottom tray into the designated slot at the base of the cage. This tray collects waste and facilitates cleaning.
5. Place Cage on Stand:

   Carefully lift the assembled cage body and place it onto the assembled stand. Ensure it is stable and centered.

Operating Instructions

• Access Doors: The cage features two large front doors for easy access to your birds and for cleaning. Multiple smaller sliding doors are provided for accessing the feeders and water bowls without opening the main doors.

  

• Moving the Cage: To move the cage, release the brakes on the two locking wheels. Use the handle located on top of the cage for guidance. Once in the desired location, engage the wheel brakes to secure the cage.

  

• Feeding and Watering: Use the four plastic bowls for food and water. These can be accessed via the small sliding doors to refill without disturbing your birds.
• Perches and Swing: The wooden perches and swing provide resting and play areas for your birds. Ensure they are securely installed.

Maintenance and Cleaning

• Daily Cleaning: Remove and clean the removable bottom tray daily to maintain hygiene. Wash with mild soap and water, then rinse thoroughly and dry before returning to the cage.
• Weekly Cleaning: Clean all perches, feeders, and the swing weekly. Inspect for any wear or damage.
• Deep Cleaning: Periodically, disassemble the cage (if necessary) for a thorough cleaning of all panels and the stand. Use bird-safe cleaning solutions.
• Inspection: Regularly check the cage structure, mesh, doors, and wheels for any signs of damage, rust, or loose connections. Tighten any loose screws.

Troubleshooting

Problem: Cage feels unstable.

Solution: Ensure all assembly hardware is tightened. Verify the cage is placed on a flat, level surface. Engage the wheel brakes if the cage is stationary.

Problem: Wheels do not roll smoothly.

Solution: Check for debris caught in the wheels. Ensure the wheel brakes are disengaged. Lubricate wheel axles if necessary.

Problem: Doors do not close securely.

Solution: Inspect the door hinges and latches for damage or misalignment. Adjust if possible, or contact customer support if parts are broken.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official PawHut website. Keep your proof of purchase for any warranty claims.