TOUCAN RC HOBBY LS-20160901-TX-RX-PAINTING-OG

TOUCAN RC HOBBY 1/14 Lesu 8X8 Hydraulic Dumper Truck Instruction Manual

Model: LS-20160901-TX-RX-PAINTING-OG

Introduction

This manual provides essential information for the safe and effective operation, assembly, and maintenance of your TOUCAN RC HOBBY 1/14 Lesu 8X8 Hydraulic Dumper Truck. This model is a semi-assembled version, featuring a painted orange cab and bucket, with the cab requiring final assembly. The metal chassis is pre-assembled. A radio controller is included. Please read this manual thoroughly before use.

TOUCAN RC HOBBY 1/14 Lesu 8X8 Hydraulic Dumper Truck with dump bed raised

Figure 1: TOUCAN RC HOBBY 1/14 Lesu 8X8 Hydraulic Dumper Truck with its dump bed raised.

Safety Information

  • This product is not suitable for individuals under 15 years of age. It is designed for adult hobbyists.
  • Always operate the RC truck in a safe environment, away from people, pets, and obstacles.
  • Ensure all connections are secure before operation.
  • Do not modify the product in any way not specified in this manual.
  • Keep hands and loose clothing away from moving parts.
  • Always disconnect the battery when the truck is not in use or during maintenance.

What's Included

The package includes the semi-assembled TOUCAN RC HOBBY 1/14 Lesu 8X8 Hydraulic Dumper Truck and a radio controller.

  • 1x TOUCAN RC HOBBY 1/14 Lesu 8X8 Hydraulic Dumper Truck (semi-assembled)
  • 1x Radio Controller

Note: The battery is not included. A 2S x3600mAh, 7.4V Lithium-Ion Polymer battery and a compatible charger are required for operation.

TOUCAN RC HOBBY 1/14 Lesu 8X8 Hydraulic Dumper Truck with remote control and battery

Figure 2: The TOUCAN RC HOBBY 1/14 Lesu 8X8 Hydraulic Dumper Truck, showing the included radio controller. Note that the battery is sold separately.

Setup

1. Cab Assembly

The cab of the dumper truck is unassembled and requires slight assembly. Carefully follow the separate assembly instructions provided with the cab components to attach it to the metal chassis.

Close-up of the TOUCAN RC HOBBY 1/14 Lesu 8X8 Hydraulic Dumper Truck cab

Figure 3: Close-up view of the truck's cab, which requires assembly.

2. Battery Installation

  1. Ensure the truck's power switch is in the OFF position.
  2. Locate the battery compartment, typically under the cab or chassis.
  3. Connect a fully charged 2S x3600mAh, 7.4V Lithium-Ion Polymer battery to the truck's power connector.
  4. Secure the battery within its compartment.
Underside view of the TOUCAN RC HOBBY 1/14 Lesu 8X8 Hydraulic Dumper Truck chassis showing electronics and battery area

Figure 4: Underside view of the chassis, indicating the location for battery and electronics installation.

3. Radio Controller Setup

Refer to the radio controller's specific manual for detailed binding and calibration procedures. Ensure the controller batteries are installed and fully charged.

Operating Instructions

Familiarize yourself with the controls on your radio controller before operating the truck. Always start in an open area to practice.

Video 1: This video demonstrates various operating features of the TOUCAN RC HOBBY 1/14 Lesu 8X8 Hydraulic Dumper Truck:
- Light System: (0:13) Shows the functional headlights, taillights, and turn signals.
- Steering: (0:19) Illustrates the truck's steering capabilities.
- Forward/Backward Movement: (0:37) Demonstrates basic driving controls.
- Hydraulic Dump: (0:55) Shows the dump bed raising and lowering.
- Hydraulic Full Dump (Roll On/Off): (1:25) Highlights the mechanism for detaching and reattaching the dump container.
- Neutral Gear: (2:07) Shows the truck in neutral.
- High/Low Speed: (2:11) Compares the truck's performance at different speed settings.
- Differential Lock Axles: (2:18) Demonstrates the differential lock feature for improved traction.

Hydraulic Dump Function

The truck is equipped with a hydraulic system for operating the dump bed. Use the designated controls on your radio controller to raise and lower the dump bed as shown in Video 1 (0:55).

Close-up of the hydraulic cylinders on the TOUCAN RC HOBBY 1/14 Lesu 8X8 Hydraulic Dumper Truck

Figure 5: Detailed view of the hydraulic cylinders responsible for the dump bed operation.

Hydraulic Full Dump (Roll On/Off) Function

This model features a roll-on/off tipper mechanism, allowing the entire dump bed to be detached and reattached. Use the specific controls on your radio controller to engage and operate this function, as demonstrated in Video 1 (1:25).

Close-up of the roll-on/off mechanism engaging the dump container

Figure 6: The roll-on/off mechanism preparing to engage or disengage the dump container.

Maintenance

  • Cleaning: After each use, especially in dusty or dirty conditions, clean the truck with a soft brush or cloth. Avoid using water directly on electronic components.
  • Lubrication: Periodically lubricate moving parts, such as the hydraulic cylinders and axle joints, with appropriate RC-grade lubricant.
  • Battery Care: Always charge the battery using a compatible charger. Do not overcharge or completely discharge the battery. Store batteries in a cool, dry place.
  • Inspection: Regularly inspect all screws, connections, and moving parts for looseness or damage. Tighten loose screws and replace damaged parts as needed.
Close-up of the wheels and tires of the TOUCAN RC HOBBY 1/14 Lesu 8X8 Hydraulic Dumper Truck

Figure 7: Inspecting the wheels and tires for wear and tear is part of routine maintenance.

Troubleshooting

ProblemPossible CauseSolution
Truck does not respond to controller.Low battery in truck or controller; controller not bound; power switch off.Charge/replace batteries; re-bind controller (refer to controller manual); ensure power switches are ON.
Hydraulic dump not working.Low battery; hydraulic fluid level low; hydraulic system blockage.Charge battery; check hydraulic fluid (consult advanced manual if available); inspect for blockages.
Truck moves slowly or with reduced power.Low battery; motor/gearbox issue; excessive load.Charge battery; inspect motor/gearbox for damage; reduce load.

Specifications

Brand:TOUCAN RC HOBBY
Model Name:LS-20160901-TX-RX-PAINTING-OG
Scale:1:14 Scale
Material Type:Metal, Plastic
Item Dimensions (LxWxH):19.5 x 7.8 x 9.8 inches
Power Source:Battery Powered (1 Nonstandard Battery required, not included)
Recommended Battery:2S x3600mAh, 7.4V Lithium-Ion Polymer
Included Components:Remote Controller
Assembly Required:Yes (semi-assembled)
Manufacturer Minimum Age:18 years (216 months)

Warranty and Support

This product comes with a 90-day warranty against manufacturer defects. For warranty claims, technical support, or inquiries regarding replacement parts, please contact TOUCAN RC HOBBY customer service. Keep your proof of purchase for warranty validation.

For further assistance, visit the official TOUCAN RC HOBBY store: TOUCAN RC HOBBY Store

© 2024 TOUCAN RC HOBBY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.