Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Anpviz 4MP PoE IP Bullet Camera (U Series). Please read this manual thoroughly before using the product to ensure proper setup and optimal performance. This camera is designed for both indoor and outdoor surveillance, offering high-resolution video, night vision capabilities, and Power over Ethernet (PoE) for simplified installation.
Product Overview
Key Features
- 4MP HD Resolution: Captures clear video at 2560x1440 pixels for detailed monitoring.
- Power over Ethernet (PoE): Simplifies installation by providing power and data over a single Ethernet cable.
- Infrared Night Vision: Offers up to 65 feet (20 meters) of clear vision in low-light or no-light conditions.
- Built-in Microphone: Enables one-way audio recording to capture sound in the surveillance area.
- IP66 Waterproof Rating: Durable metal housing designed to withstand harsh outdoor weather conditions (temperatures from -4°F to 140°F / -20°C to 60°C).
- 2.8mm Wide Angle Lens: Provides a 108° field of view to cover a broad area.
- Motion Detection Alert: Configurable alerts for detected motion.
- Remote Access: View live feed and recordings via the VideoLink App on mobile devices or PC client software.
- NDAA Compliant: Meets National Defense Authorization Act standards.
Package Contents
Verify that all items are present in the package:
- Anpviz 4MP PoE IP Bullet Camera Body
- Instruction Manual
- Mounting Screws
- After-sales Card
Camera Components
Figure 1: Front view of the Anpviz 4MP PoE IP Bullet Camera, showcasing its sleek white design and lens.
Figure 2: Detailed diagram of the camera components, including the 2.8mm fixed lens, infrared sensor light, built-in microphone (one-way audio), power input, and network port (PoE). The diagram also highlights the metal aluminum housing and IP66 weatherproof rating.
Setup and Installation
Mounting the Camera
The camera can be mounted on a wall or ceiling. Choose a location that provides the desired field of view and is within reach of your network cabling.
- Mark the drilling points using the camera's base as a template.
- Drill pilot holes and insert wall anchors if mounting on drywall or masonry.
- Secure the camera base to the surface using the provided screws.
- Adjust the camera angle for optimal coverage.
Connection Methods
The Anpviz PoE IP Bullet Camera offers flexible connection options:
- Directly to a PoE NVR: For a plug-and-play setup with Anpviz PoE NVRs or other Onvif-compatible NVRs.
- To a PoE Switch/Injector: If you do not have a PoE NVR, connect the camera to a DC 48-54V PoE Switch or Injector.
- Using a DC12V Power Adapter: If neither an NVR nor a PoE switch is available, the camera can be powered by a DC12V power adapter (not included) and connected to your network via a standard Ethernet cable.
Figure 3: Illustration of Power over Ethernet (PoE) connection, showing how a single Ethernet cable provides both power and data to the camera.
Connecting to an NVR System
Follow these steps to connect your camera to a Network Video Recorder (NVR):
Figure 4: Diagram illustrating the connection of the camera to an NVR system. This setup typically involves connecting the camera to the NVR's PoE ports, and the NVR to a monitor/TV, mouse, and power source. An Ethernet extension cable may be required for longer distances.
- Connect the camera's Ethernet cable to a PoE port on your NVR.
- Connect your NVR to a monitor/TV via HDMI or VGA.
- Connect a mouse to the NVR for navigation.
- Ensure the NVR is connected to a power source.
- The camera should be automatically detected by the NVR. Refer to your NVR's manual for specific camera addition procedures if needed.
Connecting for Standalone Use (to PC/Router)
For standalone use, connect the camera to a PoE switch/injector or use a DC12V power adapter, then connect to your network router.
Figure 5: Diagram showing standalone camera connection options. The camera can be powered by a PoE switch/injector or a DC12V adapter, then connected to a router. This setup allows access via PC client software or mobile apps.
- Connect the camera to a PoE switch/injector via Ethernet, or use a DC12V power adapter (not included) for power.
- Connect the PoE switch/injector (or the camera directly if using a non-PoE switch with DC power) to your network router via an Ethernet cable.
- Download and install the appropriate PC client software (VideoLink/LMS for U Series) or mobile app (VideoLink for U Series) from the Anpviz website or app stores.
- Follow the software/app instructions to add and configure the camera.
Operation
Accessing the Camera Feed
You can access your camera's live feed and recordings through various platforms:
- Mobile App (VideoLink): Download the VideoLink app from your device's app store (iOS/Android). Register an account, add your camera by scanning the QR code or manually entering its details, and begin viewing.
- PC Client Software (VideoLink/LMS): Install the client software on your Windows PC. This provides advanced viewing and management options.
- Web Browser: Access the camera directly via its IP address using a web browser (e.g., IE, Edge, Firefox, Google Chrome).
- NVR Interface: If connected to an NVR, view the camera feed directly through the NVR's interface on a connected monitor.
Figure 6: Screenshot of the mobile application interface, demonstrating live view and playback options for the Anpviz camera.
Recording and Playback
The camera supports 24/7 continuous recording when connected to a compatible NVR or NAS. You can also configure motion-triggered recording.
- Continuous Recording: Set up recording schedules via your NVR or client software.
- Motion Detection Recording: Enable motion detection in the camera settings. When motion is detected, the camera will record and can send alerts.
- Playback: Access recorded footage through the NVR, PC client software, or mobile app. Navigate through the timeline to find specific events.
Figure 7: Comparison image showing the camera's 4MP resolution during daytime and its clear night vision capabilities, highlighting its performance in varying light conditions.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your camera.
- Cleaning: Gently wipe the camera lens and body with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Firmware Updates: Periodically check the Anpviz official website for firmware updates. Keeping your camera's firmware updated can improve performance and add new features.
- Environmental Protection: While the camera is IP66 waterproof, ensure its mounting location does not expose it to direct, prolonged water submersion or extreme physical impact.
Figure 8: Image illustrating the camera's IP66 waterproof rating and its ability to withstand extreme temperatures, from 140°F (60°C) to -4°F (-20°C), and humidity levels from 10% to 90%.
Troubleshooting
If you encounter issues with your Anpviz camera, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image/video feed |
|
|
| Poor image quality |
|
|
| Motion detection not working |
|
|
| Cannot access camera remotely |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | IPC-B8740W-S |
| Video Capture Resolution | 4 MP (2560x1440) |
| Frame Rate | 25 frames per second |
| Lens | 2.8mm Fixed Focus |
| Viewing Angle | 108 Degrees |
| Night Vision Range | 65 Feet (Infrared) |
| Audio | Built-in Microphone (One-way audio) |
| Connectivity Technology | Wired (PoE) |
| Power Source | Power over Ethernet / 12V DC (adapter not included) |
| International Protection Rating | IP66 (Water Resistant) |
| Material | Metal |
| Dimensions (L x W x H) | 7.08 x 3.15 x 3.94 inches |
| Item Weight | 13.1 ounces |
| Compatible Devices | Desktop, Laptop, Smartphone, Tablet, Television |
| Controller Type | Android, CMS, Windows, iOS |
| Mounting Type | Wall Mount, Ceiling Mount |
| Special Features | Built-in Mic, HD Resolution, Motion Sensor, Night Vision |
Warranty and Support
Anpviz provides a 1-Year Warranty for this product. We also offer Lifetime Technical Support to assist you with any questions or issues you may encounter.
Contact Support
For technical assistance or warranty inquiries, please contact our professional tech staff:
- Email: support@anpvizsecurity.com
- Availability: Monday - Friday, 9:00 AM - 6:00 PM (Time Zone not specified, assume PST/EST based on Amazon.com)
You can also reach out via the Amazon Seller platform for direct assistance.
