1. Introduction
Thank you for purchasing the Imazing IM33 Jump Starter with Air Compressor. This device is a versatile tool designed to provide emergency vehicle jump-starting, tire inflation, portable power bank functionality, and emergency lighting. Please read this manual thoroughly before use to ensure safe and optimal operation. Keep this manual for future reference.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the device and property.
- Do not expose the device to rain or moisture.
- Do not disassemble the unit. Refer all servicing to qualified personnel.
- Keep out of reach of children.
- Ensure proper polarity when connecting to a vehicle battery. Reverse connection can cause damage.
- Do not operate the air compressor continuously for more than 10 minutes to prevent overheating. Allow it to cool down before resuming use.
- Operate the device within the specified temperature range of -4°F to 140°F (-20°C to 60°C).
Smart Clamp Protection Features
The smart clamp is equipped with multiple safety features to protect both the jump starter and your vehicle's battery:
- Reverse Connection Protection
- Over-Discharge Protection
- Over-Current Protection
- Reverse Current Protection
- Low Voltage Protection
- High Voltage Protection
- Over-Temperature Protection
- Overcharge Protection
- Short Circuit Protection
Image: The smart clamp features various safety indicators to ensure correct and safe operation.
Image: The Imazing IM33 is designed to operate reliably in a wide range of temperatures, from extreme cold (-4°F) to intense heat (140°F).
3. Package Contents
Verify that all items are present in your package:
- Imazing IM33 Jump Starter Unit x 1
- Smart Clamp Cables x 1
- USB-C Charging Cable x 1
- Air Hose x 1
- Valve Connectors x 3 (for various inflatables)
- User Manual x 1
- Storage Box x 1
Image: A complete view of all items included in the Imazing IM33 product package.
4. Product Overview
The Imazing IM33 is a compact and powerful device combining a jump starter, air compressor, power bank, and LED emergency light. It features an LCD display for battery level and air pressure readings, and intuitive controls.
Image: The Imazing IM33 main unit shown with its smart clamp cables, air hose, various nozzles, and USB-C charging cable.
Component Identification
- LCD Display: Shows battery percentage and air pressure.
- Power Button: Turns the device on/off, cycles LED light modes.
- 'M' Button: Mode selection for air compressor.
- '+' / '-' Buttons: Adjust air pressure settings.
- LED Light: Emergency illumination.
- Jump Start Port: For connecting smart clamp cables.
- Air Hose Port: For connecting the air hose.
- USB Output Ports (x2): For charging external devices (one is QC3.0 compatible).
- USB-C Input Port: For charging the jump starter unit.
5. Specifications
| Feature | Specification |
|---|---|
| Model Number | IM33-01 |
| Battery Capacity | 12800mAh |
| Peak Current | 1500A |
| Start Voltage | 12V |
| Gas Engine Rating | Up to 7.0L |
| Diesel Engine Rating | Up to 6.5L |
| Air Compressor Max Pressure | 120 PSI |
| USB Output 1 | Standard USB |
| USB Output 2 | QC3.0 Fast Charging |
| Charging Input | USB-C |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Dimensions | 22.8 x 12.8 x 10.7 cm |
| Weight | 1.33 kg |
6. Setup: Charging the Jump Starter
Before first use, fully charge the Imazing IM33 unit. It is recommended to keep the unit charged above 80% for optimal performance, especially before jump-starting a vehicle.
- Connect the provided USB-C charging cable to the USB-C input port on the jump starter.
- Connect the other end of the USB-C cable to a USB wall adapter (not included) or a powered USB port.
- The LCD display will show the charging progress. The unit is fully charged when the display shows 100%.
A full charge typically takes several hours, depending on the power source.
7. Operating Instructions
7.1 Jump Starting a Vehicle
The Imazing IM33 can jump start 12V gasoline vehicles up to 7.0L and 12V diesel vehicles up to 6.5L.
- Ensure the jump starter is sufficiently charged (preferably above 80%).
- Connect the smart clamp cable to the jump start port on the Imazing IM33 unit.
- Connect the red (+) clamp to the positive terminal of the vehicle's battery.
- Connect the black (-) clamp to the negative terminal of the vehicle's battery.
- Once connected, the smart clamp's indicator light will show green if the connection is correct and safe. If it shows red or flashes, check the connections.
- Start your vehicle's engine.
- Once the engine starts, immediately remove the smart clamp from the jump starter unit, then disconnect the clamps from the vehicle battery.
Image: Visual instructions for connecting the jump starter to a vehicle battery and starting the engine.
Image: The Imazing IM33 Jump Starter properly connected to a car battery, indicating readiness for use.
Image: The Imazing IM33 is compatible with a range of vehicles, including motorcycles, sedans, and SUVs, supporting engine sizes up to 7.0L for gasoline and 6.5L for diesel.
7.2 Using the Air Compressor
The integrated air compressor can inflate tires and various inflatables up to 120 PSI. It comes with 4 types of valve connectors.
- Connect the air hose to the air hose port on the jump starter unit.
- Attach the appropriate valve connector to the air hose, then securely connect it to the item you wish to inflate.
- Press the Power button for 3 seconds to turn on the jump starter.
- Press the 'M' button for 1 second to switch to air pump mode. The LCD will display the current pressure.
- Use the '+' and '-' buttons to set the desired target pressure.
- Press the Power button again for 1 second to start inflation. The compressor will automatically stop when the target pressure is reached.
- Disconnect the air hose and valve connector from the item.
Image: The Imazing IM33 with its air hose and included nozzles, demonstrating its capability to inflate car tires, bicycle tires, motorcycle tires, and sports balls.
Image: The device's display shows pressure in PSI, KPA, or BAR, and it can inflate various items like balls, swimming floats, and car tires.
7.3 Using as a Power Bank
The Imazing IM33 features two USB output ports, allowing you to charge mobile phones, tablets, and other USB-powered devices. One port supports QC3.0 fast charging.
- Connect your device's USB charging cable to one of the USB output ports on the jump starter.
- The jump starter will automatically begin charging your device.
- For faster charging, use the QC3.0 compatible port with a compatible device and cable.
Image: The Imazing IM33 can charge mobile devices via its QC3.0 fast charging USB port.
7.4 Using the LED Light
The high-brightness LED light offers three modes for various emergency and utility situations.
- Press the LED light button (often integrated with the power button or a dedicated light button) to turn on the light.
- Press the button repeatedly to cycle through the modes: Flashlight (steady on), Strobe (rapid flashing), and SOS (Morse code for distress).
- Press and hold the button to turn off the LED light.
Image: The Imazing IM33's LED light in operation, illustrating its three functional modes: standard flashlight, SOS signal, and strobe light.
8. Maintenance
Proper maintenance ensures the longevity and performance of your Imazing IM33.
- Storage: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to store it with at least 50% charge and recharge it every 3-6 months to maintain battery health.
- Cleaning: Wipe the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Heat Dissipation: The device is designed with efficient heat dissipation to ensure safety and extend its lifespan. Ensure ventilation ports are not blocked during operation.
Image: A close-up of the Imazing IM33's side, showing the ventilation design for effective heat dissipation, which enhances safety and product lifespan.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Jump starter not turning on | Battery is completely discharged. | Charge the unit fully. |
| Vehicle not starting after jump attempt | Incorrect clamp connection; vehicle battery too low; engine issue. | Check clamp connections (ensure green light on smart clamp); ensure jump starter is fully charged; consult a mechanic if engine issues persist. |
| Air compressor not inflating | Air hose not securely connected; target pressure not set; unit overheated. | Ensure air hose is tightly screwed in; set target pressure using '+'/'M' buttons; allow unit to cool down if used continuously. |
| USB charging not working | USB cable faulty; device not compatible; jump starter battery low. | Try a different USB cable; ensure device is compatible; charge the jump starter unit. |
10. Warranty and Support
The Imazing IM33 Jump Starter comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact Imazing customer service. Please have your purchase receipt and product model number (IM33) ready when contacting support.
Contact information can typically be found on the official Imazing website or through your retailer.
